commit 640a6af5099ae8f6a858a8612bec70048a4aee69
Author: Ram Kumar Dwivedi <quic_rdwivedi@quicinc.com>
Date:   Mon Feb 3 16:57:39 2025 +0530

    scsi: ufs: qcom: Enable UFS Shared ICE Feature
    
    By default, the UFS controller allocates a fixed number of RX and TX
    engines statically. Consequently, when UFS reads are in progress, the TX
    ICE engines remain idle, and vice versa.  This leads to inefficient
    utilization of RX and TX engines.
    
    To address this limitation, enable the UFS shared ICE feature for Qualcomm
    UFS V5.0 and above. This feature utilizes a pool of crypto cores for both
    TX streams (UFS Write – Encryption) and RX streams (UFS Read –
    Decryption). With this approach, crypto cores are dynamically allocated to
    either the RX or TX stream as needed.
    
    Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
    Co-developed-by: Naveen Kumar Goud Arepalli <quic_narepall@quicinc.com>
    Signed-off-by: Naveen Kumar Goud Arepalli <quic_narepall@quicinc.com>
    Co-developed-by: Nitin Rawat <quic_nitirawa@quicinc.com>
    Signed-off-by: Nitin Rawat <quic_nitirawa@quicinc.com>
    Signed-off-by: Ram Kumar Dwivedi <quic_rdwivedi@quicinc.com>
    Link: https://lore.kernel.org/r/20250203112739.11425-1-quic_rdwivedi@quicinc.com
    Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

commit ef12deb6ce74e85f6933a01e4d5ced70f5c12d2a
Author: Justin Tee <justin.tee@broadcom.com>
Date:   Thu Jan 30 16:05:24 2025 -0800

    scsi: lpfc: Copyright updates for 14.4.0.8 patches
    
    Update copyrights to 2025 for files modified in the 14.4.0.8 patch set.
    
    Signed-off-by: Justin Tee <justin.tee@broadcom.com>
    Link: https://lore.kernel.org/r/20250131000524.163662-7-justintee8345@gmail.com
    Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

commit 8be7202ad3afa76a3bec9bfc18e9e5cb988832d5
Author: Justin Tee <justin.tee@broadcom.com>
Date:   Thu Jan 30 16:05:23 2025 -0800

    scsi: lpfc: Update lpfc version to 14.4.0.8
    
    Update lpfc version to 14.4.0.8
    
    Signed-off-by: Justin Tee <justin.tee@broadcom.com>
    Link: https://lore.kernel.org/r/20250131000524.163662-6-justintee8345@gmail.com
    Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

commit 56c3d809b7b450379162d0b8a70bbe71ab8db706
Author: Justin Tee <justin.tee@broadcom.com>
Date:   Thu Jan 30 16:05:22 2025 -0800

    scsi: lpfc: Handle duplicate D_IDs in ndlp search-by D_ID routine
    
    After a port swap between separate fabrics, there may be multiple nodes in
    the vport's fc_nodes list with the same fabric well known address.
    Duplication is temporary and eventually resolves itself after dev_loss_tmo
    expires, but nameserver queries may still occur before dev_loss_tmo.  This
    possibly results in returning stale fabric ndlp objects.  Fix by adding an
    nlp_state check to ensure the ndlp search routine returns the correct newer
    allocated ndlp fabric object.
    
    Signed-off-by: Justin Tee <justin.tee@broadcom.com>
    Link: https://lore.kernel.org/r/20250131000524.163662-5-justintee8345@gmail.com
    Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

commit 23ed62897746f49f195d819ce6edeb1db27d1b72
Author: Justin Tee <justin.tee@broadcom.com>
Date:   Thu Jan 30 16:05:21 2025 -0800

    scsi: lpfc: Ignore ndlp rport mismatch in dev_loss_tmo callbk
    
    With repeated port swaps between separate fabrics, there can be multiple
    registrations for fabric well known address 0xfffffe.  This can cause ndlp
    reference confusion due to the usage of a single ndlp ptr that stores the
    rport object in fc_rport struct private storage during transport
    registration.  Subsequent registrations update the ndlp->rport field with
    the newer rport, so when transport layer triggers dev_loss_tmo for the
    earlier registered rport the ndlp->rport private storage is referencing the
    newer rport instead of the older rport in dev_loss_tmo callbk.
    
    Because the older ndlp->rport object is already cleaned up elsewhere in
    driver code during the time of fabric swap, check that the rport provided
    in dev_loss_tmo callbk actually matches the rport stored in the LLDD's
    ndlp->rport field.  Otherwise, skip dev_loss_tmo work on a stale rport.
    
    Signed-off-by: Justin Tee <justin.tee@broadcom.com>
    Link: https://lore.kernel.org/r/20250131000524.163662-4-justintee8345@gmail.com
    Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

commit f0842902b383982d1f72c490996aa8fc29a7aa0d
Author: Justin Tee <justin.tee@broadcom.com>
Date:   Thu Jan 30 16:05:20 2025 -0800

    scsi: lpfc: Free phba irq in lpfc_sli4_enable_msi() when pci_irq_vector() fails
    
    Fix smatch warning regarding missed calls to free_irq().  Free the phba IRQ
    in the failed pci_irq_vector cases.
    
    lpfc_init.c: lpfc_sli4_enable_msi() warn: 'phba->pcidev->irq' from
                 request_irq() not released.
    
    Signed-off-by: Justin Tee <justin.tee@broadcom.com>
    Link: https://lore.kernel.org/r/20250131000524.163662-3-justintee8345@gmail.com
    Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

commit 8eccc58d71eafbd2635077916b68fda15791d270
Author: Justin Tee <justin.tee@broadcom.com>
Date:   Thu Jan 30 16:05:19 2025 -0800

    scsi: lpfc: Reduce log message generation during ELS ring clean up
    
    A clean up log message is output from lpfc_els_flush_cmd() for each
    outstanding ELS I/O and repeated for every NPIV instance.  The log message
    should only be generated for active I/Os matching the NPIV vport.  Thus,
    move the vport check to before logging the message.
    
    Signed-off-by: Justin Tee <justin.tee@broadcom.com>
    Link: https://lore.kernel.org/r/20250131000524.163662-2-justintee8345@gmail.com
    Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

commit 35a0437d9f33071d81d51af70432ecab1e686078
Author: Ranjan Kumar <ranjan.kumar@broadcom.com>
Date:   Wed Jan 29 15:38:50 2025 +0530

    scsi: mpi3mr: Update driver version to 8.12.1.0.50
    
    Update driver version to 8.12.1.0.50
    
    Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com>
    Link: https://lore.kernel.org/r/20250129100850.25430-5-ranjan.kumar@broadcom.com
    Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

commit f195fc060c738d303a21fae146dbf85e1595fb4c
Author: Ranjan Kumar <ranjan.kumar@broadcom.com>
Date:   Wed Jan 29 15:38:49 2025 +0530

    scsi: mpi3mr: Synchronous access b/w reset and tm thread for reply queue
    
    When the task management thread processes reply queues while the reset
    thread resets them, the task management thread accesses an invalid queue ID
    (0xFFFF), set by the reset thread, which points to unallocated memory,
    causing a crash.
    
    Add flag 'io_admin_reset_sync' to synchronize access between the reset,
    I/O, and admin threads. Before a reset, the reset handler sets this flag to
    block I/O and admin processing threads. If any thread bypasses the initial
    check, the reset thread waits up to 10 seconds for processing to finish. If
    the wait exceeds 10 seconds, the controller is marked as unrecoverable.
    
    Signed-off-by: Sumit Saxena <sumit.saxena@broadcom.com>
    Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com>
    Link: https://lore.kernel.org/r/20250129100850.25430-4-ranjan.kumar@broadcom.com
    Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

commit 339a7b32a371a667dccfcd0e945add38f2cbe596
Author: Ranjan Kumar <ranjan.kumar@broadcom.com>
Date:   Wed Jan 29 15:38:48 2025 +0530

    scsi: mpi3mr: Support for Segmented Hardware Trace buffer
    
    Allocate segmented trace buffer if firmware advertises the capability in
    IOCfacts.
    
    Upon driver load, read the trace buffer size from driver page 1, calculate
    the required segments for trace buffer, and allocate segmented buffers.
    Each segment is 4096 bytes in size.
    
    While posting driver diagnostic buffer to firmware, advertise that trace
    buffer is segmented.
    
    Signed-off-by: Sumit Saxena <sumit.saxena@broadcom.com>
    Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com>
    Link: https://lore.kernel.org/r/20250129100850.25430-3-ranjan.kumar@broadcom.com
    Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

commit f08b24d82749117ce779cc66689e8594341130d3
Author: Ranjan Kumar <ranjan.kumar@broadcom.com>
Date:   Wed Jan 29 15:38:47 2025 +0530

    scsi: mpi3mr: Avoid reply queue full condition
    
    To avoid reply queue full condition, update the driver to check IOCFacts
    capabilities for qfull.
    
    Update the operational reply queue's Consumer Index after processing 100
    replies. If pending I/Os on a reply queue exceeds a threshold
    (reply_queue_depth - 200), then return I/O back to OS to retry.
    
    Also increase default admin reply queue size to 2K.
    
    Signed-off-by: Sumit Saxena <sumit.saxena@broadcom.com>
    Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com>
    Link: https://lore.kernel.org/r/20250129100850.25430-2-ranjan.kumar@broadcom.com
    Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

commit 772ba9b5bd2701a9967c084b66ff1daaee0367eb
Author: Andrew Donnellan <ajd@linux.ibm.com>
Date:   Mon Feb 3 18:27:59 2025 +1100

    scsi: cxlflash: Remove driver
    
    Remove the cxlflash driver for IBM CAPI Flash devices.
    
    The cxlflash driver has received minimal maintenance for some time, and
    the CAPI Flash hardware that uses it is no longer commercially available.
    
    Thanks to Uma Krishnan, Matthew Ochs and Manoj Kumar for their work on
    this driver over the years.
    
    Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com>
    Link: https://lore.kernel.org/r/20250203072801.365551-2-ajd@linux.ibm.com
    Reviewed-by: Frederic Barrat <fbarrat@linux.ibm.com>
    Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

commit 08795f4c096c55def0ecb99218917851b9b993bc
Author: Dr. David Alan Gilbert <linux@treblig.org>
Date:   Mon Jan 27 00:28:51 2025 +0000

    scsi: mpt3sas: Remove unused config functions
    
    mpt3sas_config_get_manufacturing_pg7() and
    mpt3sas_config_get_sas_device_pg1() were added as part of 2012's
    commit f92363d12359 ("[SCSI] mpt3sas: add new driver supporting 12GB SAS")
    but haven't been used.
    
    Remove them.
    
    Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
    Link: https://lore.kernel.org/r/20250127002851.113711-1-linux@treblig.org
    Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

commit b932ff7d0459ff792c00c2350c2fe9e6545eca48
Author: Dr. David Alan Gilbert <linux@treblig.org>
Date:   Mon Jan 27 00:27:16 2025 +0000

    scsi: message: fusion: Remove unused mptscsih_target_reset()
    
    mptscsih_target_reset() was added in 2023 by commit e6629081fb12 ("scsi:
    message: fusion: Correct definitions for mptscsih_dev_reset()") but never
    used.
    
    Remove it.
    
    Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
    Link: https://lore.kernel.org/r/20250127002716.113641-1-linux@treblig.org
    Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

commit a307d6ec12394c069f539d6d7de1c2e247765fb4
Author: Dr. David Alan Gilbert <linux@treblig.org>
Date:   Mon Jan 27 00:26:01 2025 +0000

    scsi: mvsas: Remove unused mvs_phys_reset()
    
    mvs_phys_reset() was added in 2009's commit 20b09c2992fe ("[SCSI] mvsas:
    add support for 94xx; layout change; bug fixes") but hasn't been used.
    
    Remove it.
    
    Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
    Link: https://lore.kernel.org/r/20250127002601.113555-1-linux@treblig.org
    Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

commit 120430bff6126870b571c378e6828c7c0b5cba51
Author: Charles Han <hanchunchao@inspur.com>
Date:   Fri Jan 24 16:13:30 2025 +0800

    scsi: isci: Fix double word in comments
    
    Remove the repeated word "for" in comments.
    
    Signed-off-by: Charles Han <hanchunchao@inspur.com>
    Link: https://lore.kernel.org/r/20250124081330.210724-1-hanchunchao@inspur.com
    Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

commit 2c445d5f832a51dfd8527fcce7323f79d37c0432
Author: Kai Mäkisara <Kai.Makisara@kolumbus.fi>
Date:   Sat Feb 1 17:11:06 2025 +0200

    scsi: st: Add sysfs file position_lost_in_reset
    
    If the value read from the file is 1, reads and writes from/to the device
    are blocked because the tape position may not match user's expectation
    (tape rewound after device reset).
    
    Signed-off-by: Kai Mäkisara <Kai.Makisara@kolumbus.fi>
    Link: https://lore.kernel.org/r/20250201151106.25529-1-Kai.Makisara@kolumbus.fi
    Reviewed-by: John Meneghini <jmeneghi@redhat.com>
    Tested-by: John Meneghini <jmeneghi@redhat.com>
    Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

commit 341128dfe10a7c8681d86e81b5bc63902da644ef
Author: Kai Mäkisara <Kai.Makisara@kolumbus.fi>
Date:   Mon Jan 20 21:49:24 2025 +0200

    scsi: st: Modify st.c to use the new scsi_error counters
    
    Compare the stored values of por_ctr and new_media_ctr against the values
    in the device struct. In case of mismatch, the Unit Attention corresponding
    to the counter has happened.  This is a safeguard against another ULD
    catching the Unit Attention sense data.
    
    Macros scsi_get_ua_new_media_ctr and scsi_get_ua_por_ctr are added to read
    the current values of the counters.
    
    Signed-off-by: Kai Mäkisara <Kai.Makisara@kolumbus.fi>
    Link: https://lore.kernel.org/r/20250120194925.44432-4-Kai.Makisara@kolumbus.fi
    Reviewed-by: John Meneghini <jmeneghi@redhat.com>
    Tested-by: John Meneghini <jmeneghi@redhat.com>
    Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

commit a5d518cd4e3e592eaa59b888a5d75ad639d554ea
Author: Kai Mäkisara <Kai.Makisara@kolumbus.fi>
Date:   Mon Jan 20 21:49:23 2025 +0200

    scsi: core: Add counters for New Media and Power On/Reset UNIT ATTENTIONs
    
    The purpose of the counters is to enable all ULDs attached to a device to
    find out that a New Media or/and Power On/Reset Unit Attentions has/have
    been set, even if another ULD catches the Unit Attention as response to a
    SCSI command.
    
    The ULDs can read the counters and see if the values have changed from the
    previous check.
    
    Signed-off-by: Kai Mäkisara <Kai.Makisara@kolumbus.fi>
    Link: https://lore.kernel.org/r/20250120194925.44432-3-Kai.Makisara@kolumbus.fi
    Reviewed-by: John Meneghini <jmeneghi@redhat.com>
    Tested-by: John Meneghini <jmeneghi@redhat.com>
    Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

commit 7081dc75df79696d8322d01821c28e53416c932c
Author: Kai Mäkisara <Kai.Makisara@kolumbus.fi>
Date:   Mon Jan 20 21:49:22 2025 +0200

    scsi: st: Restore some drive settings after reset
    
    Some of the allowed operations put the tape into a known position to
    continue operation assuming only the tape position has changed.  But reset
    sets partition, density and block size to drive default values. These
    should be restored to the values before reset.
    
    Normally the current block size and density are stored by the drive.  If
    the settings have been changed, the changed values have to be saved by the
    driver across reset.
    
    Signed-off-by: Kai Mäkisara <Kai.Makisara@kolumbus.fi>
    Link: https://lore.kernel.org/r/20250120194925.44432-2-Kai.Makisara@kolumbus.fi
    Reviewed-by: John Meneghini <jmeneghi@redhat.com>
    Tested-by: John Meneghini <jmeneghi@redhat.com>
    Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

commit 14807b4a4e03b66c26f4c82f495fc8fbe35fb95d
Author: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Date:   Sun Jan 19 21:29:39 2025 +0100

    scsi: Constify struct pci_error_handlers
    
    'struct pci_error_handlers' are not modified in these drivers.
    
    Constifying these structures moves some data to a read-only section, so
    increase overall security, especially when the structure holds some
    function pointers.
    
    On a x86_64, with allmodconfig, as an example:
    Before:
    ======
       text    data     bss     dec     hex filename
      39049    6429     112   45590    b216 drivers/scsi/aacraid/linit.o
    
    After:
    =====
       text    data     bss     dec     hex filename
      39113    6365     112   45590    b216 drivers/scsi/aacraid/linit.o
    
    Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
    Link: https://lore.kernel.org/r/efdec8425981e10fc398fa2ac599c9c45d930561.1737318548.git.christophe.jaillet@wanadoo.fr
    Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>