commit d08276658dee67cc0961691578a84cd6c086aed6 Author: Greg Kroah-Hartman Date: Wed May 3 08:37:52 2017 -0700 Linux 4.10.14 commit 3adeab312a65bba55df2b361f733be4a26c42dc6 Author: Josh Poimboeuf Date: Thu Apr 13 17:53:55 2017 -0500 ftrace/x86: Fix triple fault with graph tracing and suspend-to-ram commit 34a477e5297cbaa6ecc6e17c042a866e1cbe80d6 upstream. On x86-32, with CONFIG_FIRMWARE and multiple CPUs, if you enable function graph tracing and then suspend to RAM, it will triple fault and reboot when it resumes. The first fault happens when booting a secondary CPU: startup_32_smp() load_ucode_ap() prepare_ftrace_return() ftrace_graph_is_dead() (accesses 'kill_ftrace_graph') The early head_32.S code calls into load_ucode_ap(), which has an an ftrace hook, so it calls prepare_ftrace_return(), which calls ftrace_graph_is_dead(), which tries to access the global 'kill_ftrace_graph' variable with a virtual address, causing a fault because the CPU is still in real mode. The fix is to add a check in prepare_ftrace_return() to make sure it's running in protected mode before continuing. The check makes sure the stack pointer is a virtual kernel address. It's a bit of a hack, but it's not very intrusive and it works well enough. For reference, here are a few other (more difficult) ways this could have potentially been fixed: - Move startup_32_smp()'s call to load_ucode_ap() down to *after* paging is enabled. (No idea what that would break.) - Track down load_ucode_ap()'s entire callee tree and mark all the functions 'notrace'. (Probably not realistic.) - Pause graph tracing in ftrace_suspend_notifier_call() or bringup_cpu() or __cpu_up(), and ensure that the pause facility can be queried from real mode. Reported-by: Paul Menzel Signed-off-by: Josh Poimboeuf Tested-by: Paul Menzel Reviewed-by: Steven Rostedt (VMware) Cc: "Rafael J . Wysocki" Cc: linux-acpi@vger.kernel.org Cc: Borislav Petkov Cc: Len Brown Link: http://lkml.kernel.org/r/5c1272269a580660703ed2eccf44308e790c7a98.1492123841.git.jpoimboe@redhat.com Signed-off-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman commit 13d97094021757db39ad52e4be39662f2f685e5f Author: Sebastian Andrzej Siewior Date: Tue Mar 14 16:06:45 2017 +0100 cpu/hotplug: Serialize callback invocations proper commit dc434e056fe1dada20df7ba07f32739d3a701adf upstream. The setup/remove_state/instance() functions in the hotplug core code are serialized against concurrent CPU hotplug, but unfortunately not serialized against themself. As a consequence a concurrent invocation of these function results in corruption of the callback machinery because two instances try to invoke callbacks on remote cpus at the same time. This results in missing callback invocations and initiator threads waiting forever on the completion. The obvious solution to replace get_cpu_online() with cpu_hotplug_begin() is not possible because at least one callsite calls into these functions from a get_online_cpu() locked region. Extend the protection scope of the cpuhp_state_mutex from solely protecting the state arrays to cover the callback invocation machinery as well. Fixes: 5b7aa87e0482 ("cpu/hotplug: Implement setup/removal interface") Reported-and-tested-by: Bart Van Assche Signed-off-by: Sebastian Andrzej Siewior Cc: hpa@zytor.com Cc: mingo@kernel.org Cc: akpm@linux-foundation.org Cc: torvalds@linux-foundation.org Link: http://lkml.kernel.org/r/20170314150645.g4tdyoszlcbajmna@linutronix.de Signed-off-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman commit bd7c4f5e1d25d4ab3f29158f679396e8ffe4d34c Author: Maksim Salau Date: Sun Apr 23 20:31:40 2017 +0300 net: can: usb: gs_usb: Fix buffer on stack commit b05c73bd1e3ec60357580eb042ee932a5ed754d5 upstream. Allocate buffers on HEAP instead of STACK for local structures that are to be sent using usb_control_msg(). Signed-off-by: Maksim Salau Signed-off-by: Marc Kleine-Budde Signed-off-by: Greg Kroah-Hartman commit 43a35e671f8f6d0daffa11464f45678994198aa5 Author: Jason A. Donenfeld Date: Fri Apr 21 23:14:48 2017 +0200 macsec: avoid heap overflow in skb_to_sgvec commit 4d6fa57b4dab0d77f4d8e9d9c73d1e63f6fe8fee upstream. While this may appear as a humdrum one line change, it's actually quite important. An sk_buff stores data in three places: 1. A linear chunk of allocated memory in skb->data. This is the easiest one to work with, but it precludes using scatterdata since the memory must be linear. 2. The array skb_shinfo(skb)->frags, which is of maximum length MAX_SKB_FRAGS. This is nice for scattergather, since these fragments can point to different pages. 3. skb_shinfo(skb)->frag_list, which is a pointer to another sk_buff, which in turn can have data in either (1) or (2). The first two are rather easy to deal with, since they're of a fixed maximum length, while the third one is not, since there can be potentially limitless chains of fragments. Fortunately dealing with frag_list is opt-in for drivers, so drivers don't actually have to deal with this mess. For whatever reason, macsec decided it wanted pain, and so it explicitly specified NETIF_F_FRAGLIST. Because dealing with (1), (2), and (3) is insane, most users of sk_buff doing any sort of crypto or paging operation calls a convenient function called skb_to_sgvec (which happens to be recursive if (3) is in use!). This takes a sk_buff as input, and writes into its output pointer an array of scattergather list items. Sometimes people like to declare a fixed size scattergather list on the stack; othertimes people like to allocate a fixed size scattergather list on the heap. However, if you're doing it in a fixed-size fashion, you really shouldn't be using NETIF_F_FRAGLIST too (unless you're also ensuring the sk_buff and its frag_list children arent't shared and then you check the number of fragments in total required.) Macsec specifically does this: size += sizeof(struct scatterlist) * (MAX_SKB_FRAGS + 1); tmp = kmalloc(size, GFP_ATOMIC); *sg = (struct scatterlist *)(tmp + sg_offset); ... sg_init_table(sg, MAX_SKB_FRAGS + 1); skb_to_sgvec(skb, sg, 0, skb->len); Specifying MAX_SKB_FRAGS + 1 is the right answer usually, but not if you're using NETIF_F_FRAGLIST, in which case the call to skb_to_sgvec will overflow the heap, and disaster ensues. Signed-off-by: Jason A. Donenfeld Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit e4720b009def04f719fad174978ded823bfa8ff6 Author: Yan, Zheng Date: Wed Apr 19 10:01:48 2017 +0800 ceph: fix recursion between ceph_set_acl() and __ceph_setattr() commit 8179a101eb5f4ef0ac9a915fcea9a9d3109efa90 upstream. ceph_set_acl() calls __ceph_setattr() if the setacl operation needs to modify inode's i_mode. __ceph_setattr() updates inode's i_mode, then calls posix_acl_chmod(). The problem is that __ceph_setattr() calls posix_acl_chmod() before sending the setattr request. The get_acl() call in posix_acl_chmod() can trigger a getxattr request. The reply of the getxattr request can restore inode's i_mode to its old value. The set_acl() call in posix_acl_chmod() sees old value of inode's i_mode, so it calls __ceph_setattr() again. Link: http://tracker.ceph.com/issues/19688 Reported-by: Jerry Lee Signed-off-by: "Yan, Zheng" Reviewed-by: Jeff Layton Tested-by: Luis Henriques Signed-off-by: Ilya Dryomov Signed-off-by: Greg Kroah-Hartman commit 43e360377b09107e6c3b278c49f41fcc58802fdd Author: J. Bruce Fields Date: Fri Apr 21 15:26:30 2017 -0400 nfsd: stricter decoding of write-like NFSv2/v3 ops commit 13bf9fbff0e5e099e2b6f003a0ab8ae145436309 upstream. The NFSv2/v3 code does not systematically check whether we decode past the end of the buffer. This generally appears to be harmless, but there are a few places where we do arithmetic on the pointers involved and don't account for the possibility that a length could be negative. Add checks to catch these. Reported-by: Tuomas Haanpää Reported-by: Ari Kauppi Reviewed-by: NeilBrown Signed-off-by: J. Bruce Fields Signed-off-by: Greg Kroah-Hartman commit 144180dc47361c1168b4efce3211696ffd1fe4e4 Author: J. Bruce Fields Date: Tue Apr 25 16:21:34 2017 -0400 nfsd4: minor NFSv2/v3 write decoding cleanup commit db44bac41bbfc0c0d9dd943092d8bded3c9db19b upstream. Use a couple shortcuts that will simplify a following bugfix. Signed-off-by: J. Bruce Fields Signed-off-by: Greg Kroah-Hartman commit 86eb1d0aab0d1d84a048052a3c7fbbe0bba9f100 Author: J. Bruce Fields Date: Fri Apr 21 16:10:18 2017 -0400 nfsd: check for oversized NFSv2/v3 arguments commit e6838a29ecb484c97e4efef9429643b9851fba6e upstream. A client can append random data to the end of an NFSv2 or NFSv3 RPC call without our complaining; we'll just stop parsing at the end of the expected data and ignore the rest. Encoded arguments and replies are stored together in an array of pages, and if a call is too large it could leave inadequate space for the reply. This is normally OK because NFS RPC's typically have either short arguments and long replies (like READ) or long arguments and short replies (like WRITE). But a client that sends an incorrectly long reply can violate those assumptions. This was observed to cause crashes. Also, several operations increment rq_next_page in the decode routine before checking the argument size, which can leave rq_next_page pointing well past the end of the page array, causing trouble later in svc_free_pages. So, following a suggestion from Neil Brown, add a central check to enforce our expectation that no NFSv2/v3 call has both a large call and a large reply. As followup we may also want to rewrite the encoding routines to check more carefully that they aren't running off the end of the page array. We may also consider rejecting calls that have any extra garbage appended. That would be safer, and within our rights by spec, but given the age of our server and the NFS protocol, and the fact that we've never enforced this before, we may need to balance that against the possibility of breaking some oddball client. Reported-by: Tuomas Haanpää Reported-by: Ari Kauppi Reviewed-by: NeilBrown Signed-off-by: J. Bruce Fields Signed-off-by: Greg Kroah-Hartman commit b98d12a15ed1dbd03f5669437aec3bc6018b5f7e Author: Dmitry Torokhov Date: Thu Apr 13 15:36:31 2017 -0700 Input: i8042 - add Clevo P650RS to the i8042 reset list commit 7c5bb4ac2b76d2a09256aec8a7d584bf3e2b0466 upstream. Clevo P650RS and other similar devices require i8042 to be reset in order to detect Synaptics touchpad. Reported-by: Paweł Bylica Tested-by: Ed Bordin Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=190301 Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman commit 2f680d46a0b580286a666d1c44aec2e0c7906ec8 Author: Takashi Iwai Date: Mon Apr 24 14:09:55 2017 +0200 ASoC: intel: Fix PM and non-atomic crash in bytcr drivers commit 6e4cac23c5a648d50b107d1b53e9c4e1120c7943 upstream. The FE setups of Intel SST bytcr_rt5640 and bytcr_rt5651 drivers carry the ignore_suspend flag, and this prevents the suspend/resume working properly while the stream is running, since SST core code has the check of the running streams and returns -EBUSY. Drop these superfluous flags for fixing the behavior. Also, the bytcr_rt5640 driver lacks of nonatomic flag in some FE definitions, which leads to the kernel Oops at suspend/resume like: BUG: scheduling while atomic: systemd-sleep/3144/0x00000003 Call Trace: dump_stack+0x5c/0x7a __schedule_bug+0x55/0x70 __schedule+0x63c/0x8c0 schedule+0x3d/0x90 schedule_timeout+0x16b/0x320 ? del_timer_sync+0x50/0x50 ? sst_wait_timeout+0xa9/0x170 [snd_intel_sst_core] ? sst_wait_timeout+0xa9/0x170 [snd_intel_sst_core] ? remove_wait_queue+0x60/0x60 ? sst_prepare_and_post_msg+0x275/0x960 [snd_intel_sst_core] ? sst_pause_stream+0x9b/0x110 [snd_intel_sst_core] .... This patch addresses these appropriately, too. Signed-off-by: Takashi Iwai Acked-by: Vinod Koul Signed-off-by: Mark Brown Signed-off-by: Greg Kroah-Hartman commit bec0749254e7d57735a77d087438546ece68eb99 Author: Al Viro Date: Fri Apr 14 17:22:18 2017 -0400 p9_client_readdir() fix commit 71d6ad08379304128e4bdfaf0b4185d54375423e upstream. Don't assume that server is sane and won't return more data than asked for. Signed-off-by: Al Viro Signed-off-by: Greg Kroah-Hartman commit 67355b67b41c47d7dbb4c7843312e06f0b4e3640 Author: James Cowgill Date: Tue Apr 11 13:51:07 2017 +0100 MIPS: Avoid BUG warning in arch_check_elf commit c46f59e90226fa5bfcc83650edebe84ae47d454b upstream. arch_check_elf contains a usage of current_cpu_data that will call smp_processor_id() with preemption enabled and therefore triggers a "BUG: using smp_processor_id() in preemptible" warning when an fpxx executable is loaded. As a follow-up to commit b244614a60ab ("MIPS: Avoid a BUG warning during prctl(PR_SET_FP_MODE, ...)"), apply the same fix to arch_check_elf by using raw_current_cpu_data instead. The rationale quoted from the previous commit: "It is assumed throughout the kernel that if any CPU has an FPU, then all CPUs would have an FPU as well, so it is safe to perform the check with preemption enabled - change the code to use raw_ variant of the check to avoid the warning." Fixes: 46490b572544 ("MIPS: kernel: elf: Improve the overall ABI and FPU mode checks") Signed-off-by: James Cowgill Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/15951/ Signed-off-by: Ralf Baechle Signed-off-by: Greg Kroah-Hartman commit 7cb5877dc20e6a9dfe21b237dcc794e220bfe058 Author: James Hogan Date: Wed Apr 5 16:32:45 2017 +0100 MIPS: cevt-r4k: Fix out-of-bounds array access commit 9d7f29cdb4ca53506115cf1d7a02ce6013894df0 upstream. calculate_min_delta() may incorrectly access a 4th element of buf2[] which only has 3 elements. This may trigger undefined behaviour and has been reported to cause strange crashes in start_kernel() sometime after timer initialization when built with GCC 5.3, possibly due to register/stack corruption: sched_clock: 32 bits at 200MHz, resolution 5ns, wraps every 10737418237ns CPU 0 Unable to handle kernel paging request at virtual address ffffb0aa, epc == 8067daa8, ra == 8067da84 Oops[#1]: CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.9.18 #51 task: 8065e3e0 task.stack: 80644000 $ 0 : 00000000 00000001 00000000 00000000 $ 4 : 8065b4d0 00000000 805d0000 00000010 $ 8 : 00000010 80321400 fffff000 812de408 $12 : 00000000 00000000 00000000 ffffffff $16 : 00000002 ffffffff 80660000 806a666c $20 : 806c0000 00000000 00000000 00000000 $24 : 00000000 00000010 $28 : 80644000 80645ed0 00000000 8067da84 Hi : 00000000 Lo : 00000000 epc : 8067daa8 start_kernel+0x33c/0x500 ra : 8067da84 start_kernel+0x318/0x500 Status: 11000402 KERNEL EXL Cause : 4080040c (ExcCode 03) BadVA : ffffb0aa PrId : 0501992c (MIPS 1004Kc) Modules linked in: Process swapper/0 (pid: 0, threadinfo=80644000, task=8065e3e0, tls=00000000) Call Trace: [<8067daa8>] start_kernel+0x33c/0x500 Code: 24050240 0c0131f9 24849c64 41606020 000000c0 0c1a45e6 00000000 0c1a5f44 UBSAN also detects the same issue: ================================================================ UBSAN: Undefined behaviour in arch/mips/kernel/cevt-r4k.c:85:41 load of address 80647e4c with insufficient space for an object of type 'unsigned int' CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.9.18 #47 Call Trace: [<80028f70>] show_stack+0x88/0xa4 [<80312654>] dump_stack+0x84/0xc0 [<8034163c>] ubsan_epilogue+0x14/0x50 [<803417d8>] __ubsan_handle_type_mismatch+0x160/0x168 [<8002dab0>] r4k_clockevent_init+0x544/0x764 [<80684d34>] time_init+0x18/0x90 [<8067fa5c>] start_kernel+0x2f0/0x500 ================================================================= buf2[] is intentionally only 3 elements so that the last element is the median once 5 samples have been inserted, so explicitly prevent the possibility of comparing against the 4th element rather than extending the array. Fixes: 1fa405552e33f2 ("MIPS: cevt-r4k: Dynamically calculate min_delta_ns") Reported-by: Rabin Vincent Signed-off-by: James Hogan Tested-by: Rabin Vincent Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/15892/ Signed-off-by: Ralf Baechle Signed-off-by: Greg Kroah-Hartman commit 09c953f73ff0cb12a729bbad02c499fce88c29b3 Author: James Hogan Date: Thu Mar 30 16:06:02 2017 +0100 MIPS: KGDB: Use kernel context for sleeping threads commit 162b270c664dca2e0944308e92f9fcc887151a72 upstream. KGDB is a kernel debug stub and it can't be used to debug userland as it can only safely access kernel memory. On MIPS however KGDB has always got the register state of sleeping processes from the userland register context at the beginning of the kernel stack. This is meaningless for kernel threads (which never enter userland), and for user threads it prevents the user seeing what it is doing while in the kernel: (gdb) info threads Id Target Id Frame ... 3 Thread 2 (kthreadd) 0x0000000000000000 in ?? () 2 Thread 1 (init) 0x000000007705c4b4 in ?? () 1 Thread -2 (shadowCPU0) 0xffffffff8012524c in arch_kgdb_breakpoint () at arch/mips/kernel/kgdb.c:201 Get the register state instead from the (partial) kernel register context stored in the task's thread_struct for resume() to restore. All threads now correctly appear to be in context_switch(): (gdb) info threads Id Target Id Frame ... 3 Thread 2 (kthreadd) context_switch (rq=, cookie=..., next=, prev=0x0) at kernel/sched/core.c:2903 2 Thread 1 (init) context_switch (rq=, cookie=..., next=, prev=0x0) at kernel/sched/core.c:2903 1 Thread -2 (shadowCPU0) 0xffffffff8012524c in arch_kgdb_breakpoint () at arch/mips/kernel/kgdb.c:201 Call clobbered registers which aren't saved and exception registers (BadVAddr & Cause) which can't be easily determined without stack unwinding are reported as 0. The PC is taken from the return address, such that the state presented matches that found immediately after returning from resume(). Fixes: 8854700115ec ("[MIPS] kgdb: add arch support for the kernel's kgdb core") Signed-off-by: James Hogan Cc: Jason Wessel Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/15829/ Signed-off-by: Ralf Baechle Signed-off-by: Greg Kroah-Hartman commit 4a71345ea6f8a7f8fe79db908bf89605ebcf1f56 Author: Noam Camus Date: Tue Apr 4 11:00:41 2017 +0300 ARC: [plat-eznps] Fix build error commit 6492f09e864417d382e22b922ae30693a7ce2982 upstream. Make ATOMIC_INIT available for all ARC platforms (including plat-eznps) Signed-off-by: Noam Camus Signed-off-by: Vineet Gupta Signed-off-by: Greg Kroah-Hartman commit 47dbabb85ef762bbd0be73800d0f167e27fd5ac4 Author: Johannes Thumshirn Date: Wed Apr 12 09:21:19 2017 +0200 scsi: return correct blkprep status code in case scsi_init_io() fails. commit e7661a8e5ce10b5321882d0bbaf3f81070903319 upstream. When instrumenting the SCSI layer to run into the !blk_rq_nr_phys_segments(rq) case the following warning emitted from the block layer: blk_peek_request: bad return=-22 This happens because since commit fd3fc0b4d730 ("scsi: don't BUG_ON() empty DMA transfers") we return the wrong error value from scsi_prep_fn() back to the block layer. [mkp: silenced checkpatch] Signed-off-by: Johannes Thumshirn Fixes: fd3fc0b4d730 scsi: don't BUG_ON() empty DMA transfers Reviewed-by: Christoph Hellwig Reviewed-by: Hannes Reinecke Reviewed-by: Bart Van Assche Signed-off-by: Martin K. Petersen Signed-off-by: Greg Kroah-Hartman commit dcb730f79d3329cdb5a80f3633ec9903af91a533 Author: Takashi Iwai Date: Sun Apr 9 10:41:27 2017 +0200 ALSA: seq: Don't break snd_use_lock_sync() loop by timeout commit 4e7655fd4f47c23e5249ea260dc802f909a64611 upstream. The snd_use_lock_sync() (thus its implementation snd_use_lock_sync_helper()) has the 5 seconds timeout to break out of the sync loop. It was introduced from the beginning, just to be "safer", in terms of avoiding the stupid bugs. However, as Ben Hutchings suggested, this timeout rather introduces a potential leak or use-after-free that was apparently fixed by the commit 2d7d54002e39 ("ALSA: seq: Fix race during FIFO resize"): for example, snd_seq_fifo_event_in() -> snd_seq_event_dup() -> copy_from_user() could block for a long time, and snd_use_lock_sync() goes timeout and still leaves the cell at releasing the pool. For fixing such a problem, we remove the break by the timeout while still keeping the warning. Suggested-by: Ben Hutchings Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman commit 7b2b791c65d2ecb0d9997cbe1bee0355c41603dd Author: Takashi Sakamoto Date: Fri Apr 14 12:43:01 2017 +0900 ALSA: firewire-lib: fix inappropriate assignment between signed/unsigned type commit dfb00a56935186171abb5280b3407c3f910011f1 upstream. An abstraction of asynchronous transaction for transmission of MIDI messages was introduced in Linux v4.4. Each driver can utilize this abstraction to transfer MIDI messages via fixed-length payload of transaction to a certain unit address. Filling payload of the transaction is done by callback. In this callback, each driver can return negative error code, however current implementation assigns the return value to unsigned variable. This commit changes type of the variable to fix the bug. Reported-by: Julia Lawall Fixes: 585d7cba5e1f ("ALSA: firewire-lib: add helper functions for asynchronous transactions to transfer MIDI messages") Signed-off-by: Takashi Sakamoto Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman commit a33e886d3f19b48cfdc925d59ad6388baf46ccfc Author: Takashi Sakamoto Date: Mon Apr 3 21:13:40 2017 +0900 ALSA: oxfw: fix regression to handle Stanton SCS.1m/1d commit 3d016d57fdc5e6caa4cd67896f4b081bccad6e2c upstream. At a commit 6c29230e2a5f ("ALSA: oxfw: delayed registration of sound card"), ALSA oxfw driver fails to handle SCS.1m/1d, due to -EBUSY at a call of snd_card_register(). The cause is that the driver manages to register two rawmidi instances with the same device number 0. This is a regression introduced since kernel 4.7. This commit fixes the regression, by fixing up device property after discovering stream formats. Fixes: 6c29230e2a5f ("ALSA: oxfw: delayed registration of sound card") Signed-off-by: Takashi Sakamoto Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman commit f62c45868079be031b647faa5d42f689aa96d26b Author: Jamie Bainbridge Date: Wed Apr 26 10:43:27 2017 +1000 ipv6: check raw payload size correctly in ioctl [ Upstream commit 105f5528b9bbaa08b526d3405a5bcd2ff0c953c8 ] In situations where an skb is paged, the transport header pointer and tail pointer can be the same because the skb contents are in frags. This results in ioctl(SIOCINQ/FIONREAD) incorrectly returning a length of 0 when the length to receive is actually greater than zero. skb->len is already correctly set in ip6_input_finish() with pskb_pull(), so use skb->len as it always returns the correct result for both linear and paged data. Signed-off-by: Jamie Bainbridge Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit 466dfcd1d81a083b1f4fea82bd5f4416afd5eaf6 Author: Wei Wang Date: Tue Apr 25 17:38:02 2017 -0700 tcp: memset ca_priv data to 0 properly [ Upstream commit c1201444075009507a6818de6518e2822b9a87c8 ] Always zero out ca_priv data in tcp_assign_congestion_control() so that ca_priv data is cleared out during socket creation. Also always zero out ca_priv data in tcp_reinit_congestion_control() so that when cc algorithm is changed, ca_priv data is cleared out as well. We should still zero out ca_priv data even in TCP_CLOSE state because user could call connect() on AF_UNSPEC to disconnect the socket and leave it in TCP_CLOSE state and later call setsockopt() to switch cc algorithm on this socket. Fixes: 2b0a8c9ee ("tcp: add CDG congestion control") Reported-by: Andrey Konovalov Signed-off-by: Wei Wang Acked-by: Eric Dumazet Acked-by: Yuchung Cheng Acked-by: Neal Cardwell Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit 04630e2ed8348e0d7569785c8d6c0ec1e406e62a Author: WANG Cong Date: Tue Apr 25 14:37:15 2017 -0700 ipv6: check skb->protocol before lookup for nexthop [ Upstream commit 199ab00f3cdb6f154ea93fa76fd80192861a821d ] Andrey reported a out-of-bound access in ip6_tnl_xmit(), this is because we use an ipv4 dst in ip6_tnl_xmit() and cast an IPv4 neigh key as an IPv6 address: neigh = dst_neigh_lookup(skb_dst(skb), &ipv6_hdr(skb)->daddr); if (!neigh) goto tx_err_link_failure; addr6 = (struct in6_addr *)&neigh->primary_key; // <=== HERE addr_type = ipv6_addr_type(addr6); if (addr_type == IPV6_ADDR_ANY) addr6 = &ipv6_hdr(skb)->daddr; memcpy(&fl6->daddr, addr6, sizeof(fl6->daddr)); Also the network header of the skb at this point should be still IPv4 for 4in6 tunnels, we shold not just use it as IPv6 header. This patch fixes it by checking if skb->protocol is ETH_P_IPV6: if it is, we are safe to do the nexthop lookup using skb_dst() and ipv6_hdr(skb)->daddr; if not (aka IPv4), we have no clue about which dest address we can pick here, we have to rely on callers to fill it from tunnel config, so just fall to ip6_route_output() to make the decision. Fixes: ea3dc9601bda ("ip6_tunnel: Add support for wildcard tunnel endpoints.") Reported-by: Andrey Konovalov Tested-by: Andrey Konovalov Cc: Steffen Klassert Signed-off-by: Cong Wang Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit 683f8d60761cb22413e25ce0d58c8499bfc875c0 Author: Alexander Kochetkov Date: Thu Apr 20 14:00:04 2017 +0300 net: phy: fix auto-negotiation stall due to unavailable interrupt [ Upstream commit f555f34fdc586a56204cd16d9a7c104ec6cb6650 ] The Ethernet link on an interrupt driven PHY was not coming up if the Ethernet cable was plugged before the Ethernet interface was brought up. The patch trigger PHY state machine to update link state if PHY was requested to do auto-negotiation and auto-negotiation complete flag already set. During power-up cycle the PHY do auto-negotiation, generate interrupt and set auto-negotiation complete flag. Interrupt is handled by PHY state machine but doesn't update link state because PHY is in PHY_READY state. After some time MAC bring up, start and request PHY to do auto-negotiation. If there are no new settings to advertise genphy_config_aneg() doesn't start PHY auto-negotiation. PHY continue to stay in auto-negotiation complete state and doesn't fire interrupt. At the same time PHY state machine expect that PHY started auto-negotiation and is waiting for interrupt from PHY and it won't get it. Fixes: 321beec5047a ("net: phy: Use interrupts when available in NOLINK state") Signed-off-by: Alexander Kochetkov Cc: stable # v4.9+ Tested-by: Roger Quadros Tested-by: Alexandre Belloni Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit f9a8970e9eeeeb24f9169a1ba1c2624ac9f53a8b Author: David Ahern Date: Tue Apr 25 09:17:29 2017 -0700 net: ipv6: regenerate host route if moved to gc list [ Upstream commit 8048ced9beb21a52e3305f3332ae82020619f24e ] Taking down the loopback device wreaks havoc on IPv6 routing. By extension, taking down a VRF device wreaks havoc on its table. Dmitry and Andrey both reported heap out-of-bounds reports in the IPv6 FIB code while running syzkaller fuzzer. The root cause is a dead dst that is on the garbage list gets reinserted into the IPv6 FIB. While on the gc (or perhaps when it gets added to the gc list) the dst->next is set to an IPv4 dst. A subsequent walk of the ipv6 tables causes the out-of-bounds access. Andrey's reproducer was the key to getting to the bottom of this. With IPv6, host routes for an address have the dst->dev set to the loopback device. When the 'lo' device is taken down, rt6_ifdown initiates a walk of the fib evicting routes with the 'lo' device which means all host routes are removed. That process moves the dst which is attached to an inet6_ifaddr to the gc list and marks it as dead. The recent change to keep global IPv6 addresses added a new function, fixup_permanent_addr, that is called on admin up. That function restarts dad for an inet6_ifaddr and when it completes the host route attached to it is inserted into the fib. Since the route was marked dead and moved to the gc list, re-inserting the route causes the reported out-of-bounds accesses. If the device with the address is taken down or the address is removed, the WARN_ON in fib6_del is triggered. All of those faults are fixed by regenerating the host route if the existing one has been moved to the gc list, something that can be determined by checking if the rt6i_ref counter is 0. Fixes: f1705ec197e7 ("net: ipv6: Make address flushing on ifdown optional") Reported-by: Dmitry Vyukov Reported-by: Andrey Konovalov Signed-off-by: David Ahern Acked-by: Martin KaFai Lau Acked-by: Eric Dumazet Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit e2ae71739253d2dd7549cf10d8f18d9a3f62c57c Author: Herbert Xu Date: Thu Apr 20 20:55:12 2017 +0800 macvlan: Fix device ref leak when purging bc_queue [ Upstream commit f6478218e6edc2a587b8f132f66373baa7b2497c ] When a parent macvlan device is destroyed we end up purging its broadcast queue without dropping the device reference count on the packet source device. This causes the source device to linger. This patch drops that reference count. Fixes: 260916dfb48c ("macvlan: Fix potential use-after free for...") Reported-by: Joe Ghalam Signed-off-by: Herbert Xu Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit b073c2c3d40cf6cae56fd08a4bfeeb0e804dc16f Author: Soheil Hassas Yeganeh Date: Sat Mar 18 17:03:00 2017 -0400 tcp: mark skbs with SCM_TIMESTAMPING_OPT_STATS [ Upstream commit 4ef1b2869447411ad3ef91ad7d4891a83c1a509a ] SOF_TIMESTAMPING_OPT_STATS can be enabled and disabled while packets are collected on the error queue. So, checking SOF_TIMESTAMPING_OPT_STATS in sk->sk_tsflags is not enough to safely assume that the skb contains OPT_STATS data. Add a bit in sock_exterr_skb to indicate whether the skb contains opt_stats data. Fixes: 1c885808e456 ("tcp: SOF_TIMESTAMPING_OPT_STATS option for SO_TIMESTAMPING") Reported-by: JongHwan Kim Signed-off-by: Soheil Hassas Yeganeh Signed-off-by: Eric Dumazet Signed-off-by: Willem de Bruijn Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit cdaf15b43bd31003220cb080bcbbd57787a2fca9 Author: Soheil Hassas Yeganeh Date: Sat Mar 18 17:02:59 2017 -0400 tcp: fix SCM_TIMESTAMPING_OPT_STATS for normal skbs [ Upstream commit 8605330aac5a5785630aec8f64378a54891937cc ] __sock_recv_timestamp can be called for both normal skbs (for receive timestamps) and for skbs on the error queue (for transmit timestamps). Commit 1c885808e456 (tcp: SOF_TIMESTAMPING_OPT_STATS option for SO_TIMESTAMPING) assumes any skb passed to __sock_recv_timestamp are from the error queue, containing OPT_STATS in the content of the skb. This results in accessing invalid memory or generating junk data. To fix this, set skb->pkt_type to PACKET_OUTGOING for packets on the error queue. This is safe because on the receive path on local sockets skb->pkt_type is never set to PACKET_OUTGOING. With that, copy OPT_STATS from a packet, only if its pkt_type is PACKET_OUTGOING. Fixes: 1c885808e456 ("tcp: SOF_TIMESTAMPING_OPT_STATS option for SO_TIMESTAMPING") Reported-by: JongHwan Kim Signed-off-by: Soheil Hassas Yeganeh Signed-off-by: Eric Dumazet Signed-off-by: Willem de Bruijn Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit df4c4820a0b0a688b20ffca574eae6fb68f3c477 Author: Ilan Tayari Date: Thu Mar 2 15:49:45 2017 +0200 net/mlx5e: Fix ETHTOOL_GRXCLSRLALL handling [ Upstream commit 5e82c9e4ed60beba83f46a1a5a8307b99a23e982 ] Handler for ETHTOOL_GRXCLSRLALL must set info->data to the size of the table, regardless of the amount of entries in it. Existing code does not do that, and this breaks all usage of ethtool -N or -n without explicit location, with this error: rmgr: Invalid RX class rules table size: Success Set info->data to the table size. Tested: ethtool -n ens8 ethtool -N ens8 flow-type ip4 src-ip 1.1.1.1 dst-ip 2.2.2.2 action 1 ethtool -N ens8 flow-type ip4 src-ip 1.1.1.1 dst-ip 2.2.2.2 action 1 loc 55 ethtool -n ens8 ethtool -N ens8 delete 1023 ethtool -N ens8 delete 55 Fixes: f913a72aa008 ("net/mlx5e: Add support to get ethtool flow rules") Signed-off-by: Ilan Tayari Signed-off-by: Saeed Mahameed Signed-off-by: Greg Kroah-Hartman commit cce19108367eddcce8481274aedc43952826a342 Author: Eugenia Emantayev Date: Wed Mar 22 11:44:14 2017 +0200 net/mlx5e: Fix small packet threshold [ Upstream commit cbad8cddb6ed7ef3a5f0a9a70f1711d4d7fb9a8f ] RX packet headers are meant to be contained in SKB linear part, and chose a threshold of 128. It turns out this is not enough, i.e. for IPv6 packet over VxLAN. In this case, UDP/IPv4 needs 42 bytes, GENEVE header is 8 bytes, and 86 bytes for TCP/IPv6. In total 136 bytes that is more than current 128 bytes. In this case expand header flow is reached. The warning in skb_try_coalesce() caused by a wrong truesize was already fixed here: commit 158f323b9868 ("net: adjust skb->truesize in pskb_expand_head()"). Still, we prefer to totally avoid the expand header flow for performance reasons. Tested regular TCP_STREAM with iperf for 1 and 8 streams, no degradation was found. Fixes: 461017cb006a ("net/mlx5e: Support RX multi-packet WQE (Striding RQ)") Signed-off-by: Eugenia Emantayev Signed-off-by: Saeed Mahameed Signed-off-by: Greg Kroah-Hartman commit 3faae16bf93efbc8a89169acb5a2e52ff10ac101 Author: Or Gerlitz Date: Thu Mar 30 15:56:10 2017 +0200 net/mlx5: E-Switch, Correctly deal with inline mode on ConnectX-5 [ Upstream commit c415f704c8276bc686abcb0497bf2606038ca73c ] On ConnectX5 the wqe inline mode is "none" and hence the FW reports MLX5_CAP_INLINE_MODE_NOT_REQUIRED. Fix our devlink callbacks to deal with that on get and set. Also fix the tc flow parsing code not to fail anything when inline isn't required. Fixes: bffaa916588e ('net/mlx5: E-Switch, Add control for inline mode') Signed-off-by: Or Gerlitz Reviewed-by: Roi Dayan Signed-off-by: Saeed Mahameed Signed-off-by: Greg Kroah-Hartman commit 82aa6b2c1f19477c2c8911b80617e76856204a42 Author: Mohamad Haj Yahia Date: Thu Mar 30 17:00:25 2017 +0300 net/mlx5: Fix driver load bad flow when having fw initializing timeout [ Upstream commit 55378a238e04b39cc82957d91d16499704ea719b ] If FW is stuck in initializing state we will skip the driver load, but current error handling flow doesn't clean previously allocated command interface resources. Fixes: e3297246c2c8 ('net/mlx5_core: Wait for FW readiness on startup') Signed-off-by: Mohamad Haj Yahia Signed-off-by: Saeed Mahameed Signed-off-by: Greg Kroah-Hartman commit ff247bdf248add83dccd106cf33890fa52472053 Author: Nikolay Aleksandrov Date: Fri Apr 21 20:42:16 2017 +0300 ip6mr: fix notification device destruction [ Upstream commit 723b929ca0f79c0796f160c2eeda4597ee98d2b8 ] Andrey Konovalov reported a BUG caused by the ip6mr code which is caused because we call unregister_netdevice_many for a device that is already being destroyed. In IPv4's ipmr that has been resolved by two commits long time ago by introducing the "notify" parameter to the delete function and avoiding the unregister when called from a notifier, so let's do the same for ip6mr. The trace from Andrey: ------------[ cut here ]------------ kernel BUG at net/core/dev.c:6813! invalid opcode: 0000 [#1] SMP KASAN Modules linked in: CPU: 1 PID: 1165 Comm: kworker/u4:3 Not tainted 4.11.0-rc7+ #251 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Workqueue: netns cleanup_net task: ffff880069208000 task.stack: ffff8800692d8000 RIP: 0010:rollback_registered_many+0x348/0xeb0 net/core/dev.c:6813 RSP: 0018:ffff8800692de7f0 EFLAGS: 00010297 RAX: ffff880069208000 RBX: 0000000000000002 RCX: 0000000000000001 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff88006af90569 RBP: ffff8800692de9f0 R08: ffff8800692dec60 R09: 0000000000000000 R10: 0000000000000006 R11: 0000000000000000 R12: ffff88006af90070 R13: ffff8800692debf0 R14: dffffc0000000000 R15: ffff88006af90000 FS: 0000000000000000(0000) GS:ffff88006cb00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fe7e897d870 CR3: 00000000657e7000 CR4: 00000000000006e0 Call Trace: unregister_netdevice_many.part.105+0x87/0x440 net/core/dev.c:7881 unregister_netdevice_many+0xc8/0x120 net/core/dev.c:7880 ip6mr_device_event+0x362/0x3f0 net/ipv6/ip6mr.c:1346 notifier_call_chain+0x145/0x2f0 kernel/notifier.c:93 __raw_notifier_call_chain kernel/notifier.c:394 raw_notifier_call_chain+0x2d/0x40 kernel/notifier.c:401 call_netdevice_notifiers_info+0x51/0x90 net/core/dev.c:1647 call_netdevice_notifiers net/core/dev.c:1663 rollback_registered_many+0x919/0xeb0 net/core/dev.c:6841 unregister_netdevice_many.part.105+0x87/0x440 net/core/dev.c:7881 unregister_netdevice_many net/core/dev.c:7880 default_device_exit_batch+0x4fa/0x640 net/core/dev.c:8333 ops_exit_list.isra.4+0x100/0x150 net/core/net_namespace.c:144 cleanup_net+0x5a8/0xb40 net/core/net_namespace.c:463 process_one_work+0xc04/0x1c10 kernel/workqueue.c:2097 worker_thread+0x223/0x19c0 kernel/workqueue.c:2231 kthread+0x35e/0x430 kernel/kthread.c:231 ret_from_fork+0x31/0x40 arch/x86/entry/entry_64.S:430 Code: 3c 32 00 0f 85 70 0b 00 00 48 b8 00 02 00 00 00 00 ad de 49 89 47 78 e9 93 fe ff ff 49 8d 57 70 49 8d 5f 78 eb 9e e8 88 7a 14 fe <0f> 0b 48 8b 9d 28 fe ff ff e8 7a 7a 14 fe 48 b8 00 00 00 00 00 RIP: rollback_registered_many+0x348/0xeb0 RSP: ffff8800692de7f0 ---[ end trace e0b29c57e9b3292c ]--- Reported-by: Andrey Konovalov Signed-off-by: Nikolay Aleksandrov Tested-by: Andrey Konovalov Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit 9db670f71b6a69ad20008626cddd3061e72cbe0e Author: Tushar Dave Date: Thu Apr 20 15:57:31 2017 -0700 netpoll: Check for skb->queue_mapping [ Upstream commit c70b17b775edb21280e9de7531acf6db3b365274 ] Reducing real_num_tx_queues needs to be in sync with skb queue_mapping otherwise skbs with queue_mapping greater than real_num_tx_queues can be sent to the underlying driver and can result in kernel panic. One such event is running netconsole and enabling VF on the same device. Or running netconsole and changing number of tx queues via ethtool on same device. e.g. Unable to handle kernel NULL pointer dereference tsk->{mm,active_mm}->context = 0000000000001525 tsk->{mm,active_mm}->pgd = fff800130ff9a000 \|/ ____ \|/ "@'/ .. \`@" /_| \__/ |_\ \__U_/ kworker/48:1(475): Oops [#1] CPU: 48 PID: 475 Comm: kworker/48:1 Tainted: G OE 4.11.0-rc3-davem-net+ #7 Workqueue: events queue_process task: fff80013113299c0 task.stack: fff800131132c000 TSTATE: 0000004480e01600 TPC: 00000000103f9e3c TNPC: 00000000103f9e40 Y: 00000000 Tainted: G OE TPC: g0: 0000000000000000 g1: 0000000000003fff g2: 0000000000000000 g3: 0000000000000001 g4: fff80013113299c0 g5: fff8001fa6808000 g6: fff800131132c000 g7: 00000000000000c0 o0: fff8001fa760c460 o1: fff8001311329a50 o2: fff8001fa7607504 o3: 0000000000000003 o4: fff8001f96e63a40 o5: fff8001311d77ec0 sp: fff800131132f0e1 ret_pc: 000000000049ed94 RPC: l0: 0000000000000000 l1: 0000000000000800 l2: 0000000000000000 l3: 0000000000000000 l4: 000b2aa30e34b10d l5: 0000000000000000 l6: 0000000000000000 l7: fff8001fa7605028 i0: fff80013111a8a00 i1: fff80013155a0780 i2: 0000000000000000 i3: 0000000000000000 i4: 0000000000000000 i5: 0000000000100000 i6: fff800131132f1a1 i7: 00000000103fa4b0 I7: Call Trace: [00000000103fa4b0] ixgbe_xmit_frame+0x30/0xa0 [ixgbe] [0000000000998c74] netpoll_start_xmit+0xf4/0x200 [0000000000998e10] queue_process+0x90/0x160 [0000000000485fa8] process_one_work+0x188/0x480 [0000000000486410] worker_thread+0x170/0x4c0 [000000000048c6b8] kthread+0xd8/0x120 [0000000000406064] ret_from_fork+0x1c/0x2c [0000000000000000] (null) Disabling lock debugging due to kernel taint Caller[00000000103fa4b0]: ixgbe_xmit_frame+0x30/0xa0 [ixgbe] Caller[0000000000998c74]: netpoll_start_xmit+0xf4/0x200 Caller[0000000000998e10]: queue_process+0x90/0x160 Caller[0000000000485fa8]: process_one_work+0x188/0x480 Caller[0000000000486410]: worker_thread+0x170/0x4c0 Caller[000000000048c6b8]: kthread+0xd8/0x120 Caller[0000000000406064]: ret_from_fork+0x1c/0x2c Caller[0000000000000000]: (null) Signed-off-by: Tushar Dave Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit 5e54291edfb97b451e6a11505ea4e45456e40266 Author: David Ahern Date: Wed Apr 19 14:19:43 2017 -0700 net: ipv6: RTF_PCPU should not be settable from userspace [ Upstream commit 557c44be917c322860665be3d28376afa84aa936 ] Andrey reported a fault in the IPv6 route code: kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] SMP KASAN Modules linked in: CPU: 1 PID: 4035 Comm: a.out Not tainted 4.11.0-rc7+ #250 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 task: ffff880069809600 task.stack: ffff880062dc8000 RIP: 0010:ip6_rt_cache_alloc+0xa6/0x560 net/ipv6/route.c:975 RSP: 0018:ffff880062dced30 EFLAGS: 00010206 RAX: dffffc0000000000 RBX: ffff8800670561c0 RCX: 0000000000000006 RDX: 0000000000000003 RSI: ffff880062dcfb28 RDI: 0000000000000018 RBP: ffff880062dced68 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: ffff880062dcfb28 R14: dffffc0000000000 R15: 0000000000000000 FS: 00007feebe37e7c0(0000) GS:ffff88006cb00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000205a0fe4 CR3: 000000006b5c9000 CR4: 00000000000006e0 Call Trace: ip6_pol_route+0x1512/0x1f20 net/ipv6/route.c:1128 ip6_pol_route_output+0x4c/0x60 net/ipv6/route.c:1212 ... Andrey's syzkaller program passes rtmsg.rtmsg_flags with the RTF_PCPU bit set. Flags passed to the kernel are blindly copied to the allocated rt6_info by ip6_route_info_create making a newly inserted route appear as though it is a per-cpu route. ip6_rt_cache_alloc sees the flag set and expects rt->dst.from to be set - which it is not since it is not really a per-cpu copy. The subsequent call to __ip6_dst_alloc then generates the fault. Fix by checking for the flag and failing with EINVAL. Fixes: d52d3997f843f ("ipv6: Create percpu rt6_info") Reported-by: Andrey Konovalov Signed-off-by: David Ahern Acked-by: Martin KaFai Lau Tested-by: Andrey Konovalov Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit ee1f368e99ba74c98259ea725978d6ab73d6aa00 Author: Ilan Tayari Date: Wed Apr 19 21:26:07 2017 +0300 gso: Validate assumption of frag_list segementation [ Upstream commit 43170c4e0ba709c79130c3fe5a41e66279950cd0 ] Commit 07b26c9454a2 ("gso: Support partial splitting at the frag_list pointer") assumes that all SKBs in a frag_list (except maybe the last one) contain the same amount of GSO payload. This assumption is not always correct, resulting in the following warning message in the log: skb_segment: too many frags For example, mlx5 driver in Striding RQ mode creates some RX SKBs with one frag, and some with 2 frags. After GRO, the frag_list SKBs end up having different amounts of payload. If this frag_list SKB is then forwarded, the aforementioned assumption is violated. Validate the assumption, and fall back to software GSO if it not true. Change-Id: Ia03983f4a47b6534dd987d7a2aad96d54d46d212 Fixes: 07b26c9454a2 ("gso: Support partial splitting at the frag_list pointer") Signed-off-by: Ilan Tayari Signed-off-by: Ilya Lesokhin Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit 03940f08b972c86864763556c166b7da4519d131 Author: Sabrina Dubroca Date: Tue Apr 25 15:56:50 2017 +0200 ipv6: fix source routing [ Upstream commit ec9c4215fef37da6668c4105f5ad3891aaa6527a ] Commit a149e7c7ce81 ("ipv6: sr: add support for SRH injection through setsockopt") introduced handling of IPV6_SRCRT_TYPE_4, but at the same time restricted it to only IPV6_SRCRT_TYPE_0 and IPV6_SRCRT_TYPE_4. Previously, ipv6_push_exthdr() and fl6_update_dst() would also handle other values (ie STRICT and TYPE_2). Restore previous source routing behavior, by handling IPV6_SRCRT_STRICT and IPV6_SRCRT_TYPE_2 the same way as IPV6_SRCRT_TYPE_0 in ipv6_push_exthdr() and fl6_update_dst(). Fixes: a149e7c7ce81 ("ipv6: sr: add support for SRH injection through setsockopt") Signed-off-by: Sabrina Dubroca Reviewed-by: Hannes Frederic Sowa Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit c52ac0687247590ac5bedcbc5fe2d09cec9b0000 Author: David Lebrun Date: Wed Apr 19 16:10:19 2017 +0200 ipv6: sr: fix double free of skb after handling invalid SRH [ Upstream commit 95b9b88d2da5e43e025400afcb492643933bf858 ] The icmpv6_param_prob() function already does a kfree_skb(), this patch removes the duplicate one. Fixes: 1ababeba4a21f3dba3da3523c670b207fb2feb62 ("ipv6: implement dataplane support for rthdr type 4 (Segment Routing Header)") Reported-by: Dan Carpenter Cc: Dan Carpenter Signed-off-by: David Lebrun Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit 3b600a30d126809ccfb6a66bcecaae0ad0cdde6a Author: Dan Carpenter Date: Tue Apr 18 22:14:26 2017 +0300 dp83640: don't recieve time stamps twice [ Upstream commit 9d386cd9a755c8293e8916264d4d053878a7c9c7 ] This patch is prompted by a static checker warning about a potential use after free. The concern is that netif_rx_ni() can free "skb" and we call it twice. When I look at the commit that added this, it looks like some stray lines were added accidentally. It doesn't make sense to me that we would recieve the same data two times. I asked the author but never recieved a response. I can't test this code, but I'm pretty sure my patch is correct. Fixes: 4b063258ab93 ("dp83640: Delay scheduled work.") Signed-off-by: Dan Carpenter Acked-by: Stefan Sørensen Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit a024074740e75310e7c884bed6f1f6b354936727 Author: David Lebrun Date: Tue Apr 18 17:59:49 2017 +0200 ipv6: sr: fix out-of-bounds access in SRH validation [ Upstream commit 2f3bb64247b5b083d05ccecad9c2e139bbfdc294 ] This patch fixes an out-of-bounds access in seg6_validate_srh() when the trailing data is less than sizeof(struct sr6_tlv). Reported-by: Andrey Konovalov Cc: Andrey Konovalov Signed-off-by: David Lebrun Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit 7e793ce3b3e1384a657bdcd74c9404247302893c Author: Sergei Shtylyov Date: Mon Apr 17 15:55:22 2017 +0300 sh_eth: unmap DMA buffers when freeing rings [ Upstream commit 1debdc8f9ebd07daf140e417b3841596911e0066 ] The DMA API debugging (when enabled) causes: WARNING: CPU: 0 PID: 1445 at lib/dma-debug.c:519 add_dma_entry+0xe0/0x12c DMA-API: exceeded 7 overlapping mappings of cacheline 0x01b2974d to be printed after repeated initialization of the Ether device, e.g. suspend/resume or 'ifconfig' up/down. This is because DMA buffers mapped using dma_map_single() in sh_eth_ring_format() and sh_eth_start_xmit() are never unmapped. Resolve this problem by unmapping the buffers when freeing the descriptor rings; in order to do it right, we'd have to add an extra parameter to sh_eth_txfree() (we rename this function to sh_eth_tx_free(), while at it). Based on the commit a47b70ea86bd ("ravb: unmap descriptors when freeing rings"). Signed-off-by: Sergei Shtylyov Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit c526d0869a3aae261cbe542f1d539673d95b2b07 Author: David Ahern Date: Thu Apr 13 10:57:15 2017 -0600 net: vrf: Fix setting NLM_F_EXCL flag when adding l3mdev rule [ Upstream commit 426c87caa2b4578b43cd3f689f02c65b743b2559 ] Only need 1 l3mdev FIB rule. Fix setting NLM_F_EXCL in the nlmsghdr. Fixes: 1aa6c4f6b8cd8 ("net: vrf: Add l3mdev rules on first device create") Signed-off-by: David Ahern Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit 9ca5d7e426ddcfdbf1f84d9ad9f9e1ee76617ab3 Author: Willem de Bruijn Date: Wed Apr 12 19:24:35 2017 -0400 net-timestamp: avoid use-after-free in ip_recv_error [ Upstream commit 1862d6208db0aeca9c8ace44915b08d5ab2cd667 ] Syzkaller reported a use-after-free in ip_recv_error at line info->ipi_ifindex = skb->dev->ifindex; This function is called on dequeue from the error queue, at which point the device pointer may no longer be valid. Save ifindex on enqueue in __skb_complete_tx_timestamp, when the pointer is valid or NULL. Store it in temporary storage skb->cb. It is safe to reference skb->dev here, as called from device drivers or dev_queue_xmit. The exception is when called from tcp_ack_tstamp; in that case it is NULL and ifindex is set to 0 (invalid). Do not return a pktinfo cmsg if ifindex is 0. This maintains the current behavior of not returning a cmsg if skb->dev was NULL. On dequeue, the ipv4 path will cast from sock_exterr_skb to in_pktinfo. Both have ifindex as their first element, so no explicit conversion is needed. This is by design, introduced in commit 0b922b7a829c ("net: original ingress device index in PKTINFO"). For ipv6 ip6_datagram_support_cmsg converts to in6_pktinfo. Fixes: 829ae9d61165 ("net-timestamp: allow reading recv cmsg on errqueue with origin tstamp") Reported-by: Andrey Konovalov Signed-off-by: Willem de Bruijn Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit 0d8ef98cefae8ae6c1e12932bdec75940edd62c5 Author: Rabin Vincent Date: Mon Apr 10 08:36:39 2017 +0200 ipv6: Fix idev->addr_list corruption [ Upstream commit a2d6cbb0670d54806f18192cb0db266b4a6d285a ] addrconf_ifdown() removes elements from the idev->addr_list without holding the idev->lock. If this happens while the loop in __ipv6_dev_get_saddr() is handling the same element, that function ends up in an infinite loop: NMI watchdog: BUG: soft lockup - CPU#1 stuck for 23s! [test:1719] Call Trace: ipv6_get_saddr_eval+0x13c/0x3a0 __ipv6_dev_get_saddr+0xe4/0x1f0 ipv6_dev_get_saddr+0x1b4/0x204 ip6_dst_lookup_tail+0xcc/0x27c ip6_dst_lookup_flow+0x38/0x80 udpv6_sendmsg+0x708/0xba8 sock_sendmsg+0x18/0x30 SyS_sendto+0xb8/0xf8 syscall_common+0x34/0x58 Fixes: 6a923934c33 (Revert "ipv6: Revert optional address flusing on ifdown.") Signed-off-by: Rabin Vincent Acked-by: David Ahern Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit 29dc163a721e67ec62ae1318a2a0634e6a7e6224 Author: Eric Dumazet Date: Sat Apr 8 08:07:33 2017 -0700 tcp: clear saved_syn in tcp_disconnect() [ Upstream commit 17c3060b1701fc69daedb4c90be6325d3d9fca8e ] In the (very unlikely) case a passive socket becomes a listener, we do not want to duplicate its saved SYN headers. This would lead to double frees, use after free, and please hackers and various fuzzers Tested: 0 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3 +0 setsockopt(3, IPPROTO_TCP, TCP_SAVE_SYN, [1], 4) = 0 +0 fcntl(3, F_SETFL, O_RDWR|O_NONBLOCK) = 0 +0 bind(3, ..., ...) = 0 +0 listen(3, 5) = 0 +0 < S 0:0(0) win 32972 +0 > S. 0:0(0) ack 1 <...> +.1 < . 1:1(0) ack 1 win 257 +0 accept(3, ..., ...) = 4 +0 connect(4, AF_UNSPEC, ...) = 0 +0 close(3) = 0 +0 bind(4, ..., ...) = 0 +0 listen(4, 5) = 0 +0 < S 0:0(0) win 32972 +0 > S. 0:0(0) ack 1 <...> +.1 < . 1:1(0) ack 1 win 257 Fixes: cd8ae85299d5 ("tcp: provide SYN headers for passive connections") Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit 1ebfe5cf3727dc6fc41a2ea13471b431ed57e7bd Author: Xin Long Date: Thu Apr 6 13:10:52 2017 +0800 sctp: listen on the sock only when it's state is listening or closed [ Upstream commit 34b2789f1d9bf8dcca9b5cb553d076ca2cd898ee ] Now sctp doesn't check sock's state before listening on it. It could even cause changing a sock with any state to become a listening sock when doing sctp_listen. This patch is to fix it by checking sock's state in sctp_listen, so that it will listen on the sock with right state. Reported-by: Andrey Konovalov Tested-by: Andrey Konovalov Signed-off-by: Xin Long Acked-by: Marcelo Ricardo Leitner Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit 280a7e34a987decefa22e9ca5afef7da3ae28976 Author: Florian Larysch Date: Mon Apr 3 16:46:09 2017 +0200 net: ipv4: fix multipath RTM_GETROUTE behavior when iif is given [ Upstream commit a8801799c6975601fd58ae62f48964caec2eb83f ] inet_rtm_getroute synthesizes a skeletal ICMP skb, which is passed to ip_route_input when iif is given. If a multipath route is present for the designated destination, ip_multipath_icmp_hash ends up being called, which uses the source/destination addresses within the skb to calculate a hash. However, those are not set in the synthetic skb, causing it to return an arbitrary and incorrect result. Instead, use UDP, which gets no such special treatment. Signed-off-by: Florian Larysch Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit c747d66b6c6f7a0a5689a50b7eff1fa626682152 Author: Guillaume Nault Date: Mon Apr 3 13:23:15 2017 +0200 l2tp: fix PPP pseudo-wire auto-loading [ Upstream commit 249ee819e24c180909f43c1173c8ef6724d21faf ] PPP pseudo-wire type is 7 (11 is L2TP_PWTYPE_IP). Fixes: f1f39f911027 ("l2tp: auto load type modules") Signed-off-by: Guillaume Nault Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit 2ba7cfd4f6a902b80b85f471d13f2bb83f9bad54 Author: Guillaume Nault Date: Mon Apr 3 12:03:13 2017 +0200 l2tp: take reference on sessions being dumped [ Upstream commit e08293a4ccbcc993ded0fdc46f1e57926b833d63 ] Take a reference on the sessions returned by l2tp_session_find_nth() (and rename it l2tp_session_get_nth() to reflect this change), so that caller is assured that the session isn't going to disappear while processing it. For procfs and debugfs handlers, the session is held in the .start() callback and dropped in .show(). Given that pppol2tp_seq_session_show() dereferences the associated PPPoL2TP socket and that l2tp_dfs_seq_session_show() might call pppol2tp_show(), we also need to call the session's .ref() callback to prevent the socket from going away from under us. Fixes: fd558d186df2 ("l2tp: Split pppol2tp patch into separate l2tp and ppp parts") Fixes: 0ad6614048cf ("l2tp: Add debugfs files for dumping l2tp debug info") Fixes: 309795f4bec2 ("l2tp: Add netlink control API for L2TP") Signed-off-by: Guillaume Nault Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit 0fbdeb789013c7d7f6021b99625af7187fb414db Author: Yi-Hung Wei Date: Thu Mar 30 12:36:03 2017 -0700 openvswitch: Fix ovs_flow_key_update() [ Upstream commit 6f56f6186c18e3fd54122b73da68e870687b8c59 ] ovs_flow_key_update() is called when the flow key is invalid, and it is used to update and revalidate the flow key. Commit 329f45bc4f19 ("openvswitch: add mac_proto field to the flow key") introduces mac_proto field to flow key and use it to determine whether the flow key is valid. However, the commit does not update the code path in ovs_flow_key_update() to revalidate the flow key which may cause BUG_ON() on execute_recirc(). This patch addresses the aforementioned issue. Fixes: 329f45bc4f19 ("openvswitch: add mac_proto field to the flow key") Signed-off-by: Yi-Hung Wei Acked-by: Jiri Benc Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit f9bd6b937de64a4f3fcfce3a6899e1d5f061c73d Author: Andrey Konovalov Date: Wed Mar 29 16:11:22 2017 +0200 net/packet: fix overflow in check for tp_reserve [ Upstream commit bcc5364bdcfe131e6379363f089e7b4108d35b70 ] When calculating po->tp_hdrlen + po->tp_reserve the result can overflow. Fix by checking that tp_reserve <= INT_MAX on assign. Signed-off-by: Andrey Konovalov Acked-by: Eric Dumazet Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit 57a88382a9692c123e98be64c64535088c442c0e Author: Andrey Konovalov Date: Wed Mar 29 16:11:21 2017 +0200 net/packet: fix overflow in check for tp_frame_nr [ Upstream commit 8f8d28e4d6d815a391285e121c3a53a0b6cb9e7b ] When calculating rb->frames_per_block * req->tp_block_nr the result can overflow. Add a check that tp_block_size * tp_block_nr <= UINT_MAX. Since frames_per_block <= tp_block_size, the expression would never overflow. Signed-off-by: Andrey Konovalov Acked-by: Eric Dumazet Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit 5894337297adb61b8b90108a5be4cead6fe6a595 Author: Guillaume Nault Date: Wed Mar 29 08:45:29 2017 +0200 l2tp: purge socket queues in the .destruct() callback [ Upstream commit e91793bb615cf6cdd59c0b6749fe173687bb0947 ] The Rx path may grab the socket right before pppol2tp_release(), but nothing guarantees that it will enqueue packets before skb_queue_purge(). Therefore, the socket can be destroyed without its queues fully purged. Fix this by purging queues in pppol2tp_session_destruct() where we're guaranteed nothing is still referencing the socket. Fixes: 9e9cb6221aa7 ("l2tp: fix userspace reception on plain L2TP sockets") Signed-off-by: Guillaume Nault Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit 7d5eb39c0d8cb1a8ddfc137dac2086692362a044 Author: Guillaume Nault Date: Wed Mar 29 08:44:59 2017 +0200 l2tp: hold tunnel socket when handling control frames in l2tp_ip and l2tp_ip6 [ Upstream commit 94d7ee0baa8b764cf64ad91ed69464c1a6a0066b ] The code following l2tp_tunnel_find() expects that a new reference is held on sk. Either sk_receive_skb() or the discard_put error path will drop a reference from the tunnel's socket. This issue exists in both l2tp_ip and l2tp_ip6. Fixes: a3c18422a4b4 ("l2tp: hold socket before dropping lock in l2tp_ip{, 6}_recv()") Signed-off-by: Guillaume Nault Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit 63ae30d5caa7dbca7128bb3bc325e72b73cea945 Author: Talat Batheesh Date: Tue Mar 28 16:13:41 2017 +0300 net/mlx5: Avoid dereferencing uninitialized pointer [ Upstream commit e497ec680c4cd51e76bfcdd49363d9ab8d32a757 ] In NETDEV_CHANGEUPPER event the upper_info field is valid only when linking is true. Otherwise it should be ignored. Fixes: 7907f23adc18 (net/mlx5: Implement RoCE LAG feature) Signed-off-by: Talat Batheesh Reviewed-by: Aviv Heller Reviewed-by: Moni Shoua Signed-off-by: Saeed Mahameed Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit 4f45e887a6326fce709828eb229e17486b68b0fc Author: Alexei Starovoitov Date: Fri Mar 24 15:57:33 2017 -0700 bpf: improve verifier packet range checks [ Upstream commit b1977682a3858b5584ffea7cfb7bd863f68db18d ] llvm can optimize the 'if (ptr > data_end)' checks to be in the order slightly different than the original C code which will confuse verifier. Like: if (ptr + 16 > data_end) return TC_ACT_SHOT; // may be followed by if (ptr + 14 > data_end) return TC_ACT_SHOT; while llvm can see that 'ptr' is valid for all 16 bytes, the verifier could not. Fix verifier logic to account for such case and add a test. Reported-by: Huapeng Zhou Fixes: 969bf05eb3ce ("bpf: direct packet access") Signed-off-by: Alexei Starovoitov Acked-by: Daniel Borkmann Acked-by: Martin KaFai Lau Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit 443fac9f2618b93cbc5ab068dc594530236b3a23 Author: Florian Westphal Date: Sat Mar 25 10:58:24 2017 +0100 secure_seq: downgrade to per-host timestamp offsets [ Upstream commit 28ee1b746f493b7c62347d714f58fbf4f70df4f0 ] Unfortunately too many devices (not under our control) use tcp_tw_recycle=1, which depends on timestamps being identical of the same saddr. Although tcp_tw_recycle got removed in net-next we can't make such end hosts disappear so downgrade to per-host timestamp offsets. 4.10 note: original patch uses siphash (added in 4.11), since ts_off is only used to obscure uptime (and doesn't use same secret as isn generator) this uses jhash instead. Cc: Soheil Hassas Yeganeh Cc: Eric Dumazet Cc: Neal Cardwell Cc: Yuchung Cheng Reported-by: Yvan Vanrossomme Fixes: 95a22caee396c ("tcp: randomize tcp timestamp offsets for each connection") Signed-off-by: Florian Westphal Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit a35c1467232565926658ca59fe20cc1b3b9ac332 Author: WANG Cong Date: Thu Mar 23 11:03:31 2017 -0700 kcm: return immediately after copy_from_user() failure [ Upstream commit a80db69e47d764bbcaf2fec54b1f308925e7c490 ] There is no reason to continue after a copy_from_user() failure. Fixes: ab7ac4eb9832 ("kcm: Kernel Connection Multiplexor module") Cc: Tom Herbert Signed-off-by: Cong Wang Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit c79db30fd1b0d12c73bfff46640ed9faf2a3e799 Author: Nathan Sullivan Date: Wed Mar 22 15:27:01 2017 -0500 net: phy: handle state correctly in phy_stop_machine [ Upstream commit 49d52e8108a21749dc2114b924c907db43358984 ] If the PHY is halted on stop, then do not set the state to PHY_UP. This ensures the phy will be restarted later in phy_start when the machine is started again. Fixes: 00db8189d984 ("This patch adds a PHY Abstraction Layer to the Linux Kernel, enabling ethernet drivers to remain as ignorant as is reasonable of the connected PHY's design and operation details.") Signed-off-by: Nathan Sullivan Signed-off-by: Brad Mouring Acked-by: Xander Huff Acked-by: Kyle Roeschley Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit 693d7da388c29160b8f4b8e12e111e3bdcab5e5c Author: Eric Dumazet Date: Thu Mar 23 12:39:21 2017 -0700 net: neigh: guard against NULL solicit() method [ Upstream commit 48481c8fa16410ffa45939b13b6c53c2ca609e5f ] Dmitry posted a nice reproducer of a bug triggering in neigh_probe() when dereferencing a NULL neigh->ops->solicit method. This can happen for arp_direct_ops/ndisc_direct_ops and similar, which can be used for NUD_NOARP neighbours (created when dev->header_ops is NULL). Admin can then force changing nud_state to some other state that would fire neigh timer. Signed-off-by: Eric Dumazet Reported-by: Dmitry Vyukov Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit 2ec8024c56727a94a061249d710a3f14e014d1b5 Author: Tom Hromatka Date: Fri Mar 31 16:31:42 2017 -0600 sparc64: Fix kernel panic due to erroneous #ifdef surrounding pmd_write() [ Upstream commit 9ae34dbd8afd790cb5f52467e4f816434379eafa ] This commit moves sparc64's prototype of pmd_write() outside of the CONFIG_TRANSPARENT_HUGEPAGE ifdef. In 2013, commit a7b9403f0e6d ("sparc64: Encode huge PMDs using PTE encoding.") exposed a path where pmd_write() could be called without CONFIG_TRANSPARENT_HUGEPAGE defined. This can result in the panic below. The diff is awkward to read, but the changes are straightforward. pmd_write() was moved outside of #ifdef CONFIG_TRANSPARENT_HUGEPAGE. Also, __HAVE_ARCH_PMD_WRITE was defined. kernel BUG at include/asm-generic/pgtable.h:576! \|/ ____ \|/ "@'/ .. \`@" /_| \__/ |_\ \__U_/ oracle_8114_cdb(8114): Kernel bad sw trap 5 [#1] CPU: 120 PID: 8114 Comm: oracle_8114_cdb Not tainted 4.1.12-61.7.1.el6uek.rc1.sparc64 #1 task: fff8400700a24d60 ti: fff8400700bc4000 task.ti: fff8400700bc4000 TSTATE: 0000004411e01607 TPC: 00000000004609f8 TNPC: 00000000004609fc Y: 00000005 Not tainted TPC: g0: 000000000001c000 g1: 0000000000ef3954 g2: 0000000000000000 g3: 0000000000000001 g4: fff8400700a24d60 g5: fff8001fa5c10000 g6: fff8400700bc4000 g7: 0000000000000720 o0: 0000000000bc5058 o1: 0000000000000240 o2: 0000000000006000 o3: 0000000000001c00 o4: 0000000000000000 o5: 0000048000080000 sp: fff8400700bc6ab1 ret_pc: 00000000004609f0 RPC: l0: fff8400700bc74fc l1: 0000000000020000 l2: 0000000000002000 l3: 0000000000000000 l4: fff8001f93250950 l5: 000000000113f800 l6: 0000000000000004 l7: 0000000000000000 i0: fff8400700ca46a0 i1: bd0000085e800453 i2: 000000026a0c4000 i3: 000000026a0c6000 i4: 0000000000000001 i5: fff800070c958de8 i6: fff8400700bc6b61 i7: 0000000000460dd0 I7: Call Trace: [0000000000460dd0] gup_pud_range+0x170/0x1a0 [0000000000460e84] get_user_pages_fast+0x84/0x120 [00000000006f5a18] iov_iter_get_pages+0x98/0x240 [00000000005fa744] do_direct_IO+0xf64/0x1e00 [00000000005fbbc0] __blockdev_direct_IO+0x360/0x15a0 [00000000101f74fc] ext4_ind_direct_IO+0xdc/0x400 [ext4] [00000000101af690] ext4_ext_direct_IO+0x1d0/0x2c0 [ext4] [00000000101af86c] ext4_direct_IO+0xec/0x220 [ext4] [0000000000553bd4] generic_file_read_iter+0x114/0x140 [00000000005bdc2c] __vfs_read+0xac/0x100 [00000000005bf254] vfs_read+0x54/0x100 [00000000005bf368] SyS_pread64+0x68/0x80 Signed-off-by: Tom Hromatka Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit 1797e172bf100923882e28da1bf48d2f7192e20a Author: bob picco Date: Fri Mar 10 14:31:19 2017 -0500 sparc64: kern_addr_valid regression [ Upstream commit adfae8a5d833fa2b46577a8081f350e408851f5b ] I encountered this bug when using /proc/kcore to examine the kernel. Plus a coworker inquired about debugging tools. We computed pa but did not use it during the maximum physical address bits test. Instead we used the identity mapped virtual address which will always fail this test. I believe the defect came in here: [bpicco@zareason linus.git]$ git describe --contains bb4e6e85daa52 v3.18-rc1~87^2~4 . Signed-off-by: Bob Picco Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit 7cf480444103700891467fb0e25e9b6eca509117 Author: Eric Dumazet Date: Fri Mar 24 19:36:13 2017 -0700 ping: implement proper locking commit 43a6684519ab0a6c52024b5e25322476cabad893 upstream. We got a report of yet another bug in ping http://www.openwall.com/lists/oss-security/2017/03/24/6 ->disconnect() is not called with socket lock held. Fix this by acquiring ping rwlock earlier. Thanks to Daniel, Alexander and Andrey for letting us know this problem. Fixes: c319b4d76b9e ("net: ipv4: add IPPROTO_ICMP socket kind") Signed-off-by: Eric Dumazet Reported-by: Daniel Jiang Reported-by: Solar Designer Reported-by: Andrey Konovalov Signed-off-by: David S. Miller Cc: Ben Hutchings Signed-off-by: Greg Kroah-Hartman