commit 458a534cac0c808fce164cc961f8384ffc8c455e Author: Greg Kroah-Hartman Date: Wed Sep 9 19:03:14 2020 +0200 Linux 4.14.197 Tested-by: Shuah Khan Tested-by: Jon Hunter Tested-by: Linux Kernel Functional Testing Tested-by: Guenter Roeck Signed-off-by: Greg Kroah-Hartman commit 2886fd1af2db6810dbf5f7ac91eb39755142ca8a Author: Himadri Pandya Date: Thu Aug 27 12:23:55 2020 +0530 net: usb: Fix uninit-was-stored issue in asix_read_phy_addr() commit a092b7233f0e000cc6f2c71a49e2ecc6f917a5fc upstream. The buffer size is 2 Bytes and we expect to receive the same amount of data. But sometimes we receive less data and run into uninit-was-stored issue upon read. Hence modify the error check on the return value to match with the buffer size as a prevention. Reported-and-tested by: syzbot+a7e220df5a81d1ab400e@syzkaller.appspotmail.com Signed-off-by: Himadri Pandya Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman commit 02015d244d9c043414509afa370f8f7d471e14b5 Author: Johannes Berg Date: Wed Aug 19 10:46:48 2020 +0200 cfg80211: regulatory: reject invalid hints commit 47caf685a6854593348f216e0b489b71c10cbe03 upstream. Reject invalid hints early in order to not cause a kernel WARN later if they're restored to or similar. Reported-by: syzbot+d451401ffd00a60677ee@syzkaller.appspotmail.com Link: https://syzkaller.appspot.com/bug?extid=d451401ffd00a60677ee Link: https://lore.kernel.org/r/20200819084648.13956-1-johannes@sipsolutions.net Signed-off-by: Johannes Berg Signed-off-by: Greg Kroah-Hartman commit c4b219136040bc57e9704afee8f5c5a9430795a5 Author: Muchun Song Date: Fri Sep 4 16:36:13 2020 -0700 mm/hugetlb: fix a race between hugetlb sysctl handlers commit 17743798d81238ab13050e8e2833699b54e15467 upstream. There is a race between the assignment of `table->data` and write value to the pointer of `table->data` in the __do_proc_doulongvec_minmax() on the other thread. CPU0: CPU1: proc_sys_write hugetlb_sysctl_handler proc_sys_call_handler hugetlb_sysctl_handler_common hugetlb_sysctl_handler table->data = &tmp; hugetlb_sysctl_handler_common table->data = &tmp; proc_doulongvec_minmax do_proc_doulongvec_minmax sysctl_head_finish __do_proc_doulongvec_minmax unuse_table i = table->data; *i = val; // corrupt CPU1's stack Fix this by duplicating the `table`, and only update the duplicate of it. And introduce a helper of proc_hugetlb_doulongvec_minmax() to simplify the code. The following oops was seen: BUG: kernel NULL pointer dereference, address: 0000000000000000 #PF: supervisor instruction fetch in kernel mode #PF: error_code(0x0010) - not-present page Code: Bad RIP value. ... Call Trace: ? set_max_huge_pages+0x3da/0x4f0 ? alloc_pool_huge_page+0x150/0x150 ? proc_doulongvec_minmax+0x46/0x60 ? hugetlb_sysctl_handler_common+0x1c7/0x200 ? nr_hugepages_store+0x20/0x20 ? copy_fd_bitmaps+0x170/0x170 ? hugetlb_sysctl_handler+0x1e/0x20 ? proc_sys_call_handler+0x2f1/0x300 ? unregister_sysctl_table+0xb0/0xb0 ? __fd_install+0x78/0x100 ? proc_sys_write+0x14/0x20 ? __vfs_write+0x4d/0x90 ? vfs_write+0xef/0x240 ? ksys_write+0xc0/0x160 ? __ia32_sys_read+0x50/0x50 ? __close_fd+0x129/0x150 ? __x64_sys_write+0x43/0x50 ? do_syscall_64+0x6c/0x200 ? entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: e5ff215941d5 ("hugetlb: multiple hstates for multiple page sizes") Signed-off-by: Muchun Song Signed-off-by: Andrew Morton Reviewed-by: Mike Kravetz Cc: Andi Kleen Link: http://lkml.kernel.org/r/20200828031146.43035-1-songmuchun@bytedance.com Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman commit b7d6cfba234cb6ffe7367d17c33af1b04cc79afb Author: Mrinal Pandey Date: Fri Sep 4 16:35:52 2020 -0700 checkpatch: fix the usage of capture group ( ... ) commit 13e45417cedbfc44b1926124b1846f5ee8c6ba4a upstream. The usage of "capture group (...)" in the immediate condition after `&&` results in `$1` being uninitialized. This issues a warning "Use of uninitialized value $1 in regexp compilation at ./scripts/checkpatch.pl line 2638". I noticed this bug while running checkpatch on the set of commits from v5.7 to v5.8-rc1 of the kernel on the commits with a diff content in their commit message. This bug was introduced in the script by commit e518e9a59ec3 ("checkpatch: emit an error when there's a diff in a changelog"). It has been in the script since then. The author intended to store the match made by capture group in variable `$1`. This should have contained the name of the file as `[\w/]+` matched. However, this couldn't be accomplished due to usage of capture group and `$1` in the same regular expression. Fix this by placing the capture group in the condition before `&&`. Thus, `$1` can be initialized to the text that capture group matches thereby setting it to the desired and required value. Fixes: e518e9a59ec3 ("checkpatch: emit an error when there's a diff in a changelog") Signed-off-by: Mrinal Pandey Signed-off-by: Andrew Morton Tested-by: Lukas Bulwahn Reviewed-by: Lukas Bulwahn Cc: Joe Perches Link: https://lkml.kernel.org/r/20200714032352.f476hanaj2dlmiot@mrinalpandey Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman commit 54ffbb8c929629ee9515af088ffe1b2d108af61b Author: James Morse Date: Fri Sep 4 12:24:37 2020 +0100 KVM: arm64: Set HCR_EL2.PTW to prevent AT taking synchronous exception commit 71a7f8cb1ca4ca7214a700b1243626759b6c11d4 upstream. AT instructions do a translation table walk and return the result, or the fault in PAR_EL1. KVM uses these to find the IPA when the value is not provided by the CPU in HPFAR_EL1. If a translation table walk causes an external abort it is taken as an exception, even if it was due to an AT instruction. (DDI0487F.a's D5.2.11 "Synchronous faults generated by address translation instructions") While we previously made KVM resilient to exceptions taken due to AT instructions, the device access causes mismatched attributes, and may occur speculatively. Prevent this, by forbidding a walk through memory described as device at stage2. Now such AT instructions will report a stage2 fault. Such a fault will cause KVM to restart the guest. If the AT instructions always walk the page tables, but guest execution uses the translation cached in the TLB, the guest can't make forward progress until the TLB entry is evicted. This isn't a problem, as since commit 5dcd0fdbb492 ("KVM: arm64: Defer guest entry when an asynchronous exception is pending"), KVM will return to the host to process IRQs allowing the rest of the system to keep running. Cc: stable@vger.kernel.org # v4.14 Signed-off-by: James Morse Reviewed-by: Marc Zyngier Signed-off-by: Catalin Marinas Signed-off-by: Andre Przywara Signed-off-by: Greg Kroah-Hartman commit 74ecd51bc6b63f73cfc0c2fd191aa9f12891b79c Author: James Morse Date: Fri Sep 4 12:24:36 2020 +0100 KVM: arm64: Survive synchronous exceptions caused by AT instructions commit 88a84ccccb3966bcc3f309cdb76092a9892c0260 upstream. KVM doesn't expect any synchronous exceptions when executing, any such exception leads to a panic(). AT instructions access the guest page tables, and can cause a synchronous external abort to be taken. The arm-arm is unclear on what should happen if the guest has configured the hardware update of the access-flag, and a memory type in TCR_EL1 that does not support atomic operations. B2.2.6 "Possible implementation restrictions on using atomic instructions" from DDI0487F.a lists synchronous external abort as a possible behaviour of atomic instructions that target memory that isn't writeback cacheable, but the page table walker may behave differently. Make KVM robust to synchronous exceptions caused by AT instructions. Add a get_user() style helper for AT instructions that returns -EFAULT if an exception was generated. While KVM's version of the exception table mixes synchronous and asynchronous exceptions, only one of these can occur at each location. Re-enter the guest when the AT instructions take an exception on the assumption the guest will take the same exception. This isn't guaranteed to make forward progress, as the AT instructions may always walk the page tables, but guest execution may use the translation cached in the TLB. This isn't a problem, as since commit 5dcd0fdbb492 ("KVM: arm64: Defer guest entry when an asynchronous exception is pending"), KVM will return to the host to process IRQs allowing the rest of the system to keep running. Cc: stable@vger.kernel.org # v4.14 Signed-off-by: James Morse Reviewed-by: Marc Zyngier Signed-off-by: Catalin Marinas Signed-off-by: Andre Przywara Signed-off-by: Greg Kroah-Hartman commit fcc0896148c820627a5b9314d53dcf4950a63fb5 Author: James Morse Date: Fri Sep 4 12:24:35 2020 +0100 KVM: arm64: Defer guest entry when an asynchronous exception is pending commit 5dcd0fdbb492d49dac6bf21c436dfcb5ded0a895 upstream. SError that occur during world-switch's entry to the guest will be accounted to the guest, as the exception is masked until we enter the guest... but we want to attribute the SError as precisely as possible. Reading DISR_EL1 before guest entry requires free registers, and using ESB+DISR_EL1 to consume and read back the ESR would leave KVM holding a host SError... We would rather leave the SError pending and let the host take it once we exit world-switch. To do this, we need to defer guest-entry if an SError is pending. Read the ISR to see if SError (or an IRQ) is pending. If so fake an exit. Place this check between __guest_enter()'s save of the host registers, and restore of the guest's. SError that occur between here and the eret into the guest must have affected the guest's registers, which we can naturally attribute to the guest. The dsb is needed to ensure any previous writes have been done before we read ISR_EL1. On systems without the v8.2 RAS extensions this doesn't give us anything as we can't contain errors, and the ESR bits to describe the severity are all implementation-defined. Replace this with a nop for these systems. v4.14-backport: as this kernel version doesn't have the RAS support at all, remove the RAS alternative. Cc: stable@vger.kernel.org # v4.14 Signed-off-by: James Morse Signed-off-by: Marc Zyngier [ James: Removed v8.2 RAS related barriers ] Signed-off-by: James Morse Signed-off-by: Andre Przywara Signed-off-by: Greg Kroah-Hartman commit 91532df62f61f8ba4e1db392ec943b3b13200ed1 Author: James Morse Date: Fri Sep 4 12:24:34 2020 +0100 KVM: arm64: Add kvm_extable for vaxorcism code commit e9ee186bb735bfc17fa81dbc9aebf268aee5b41e upstream. KVM has a one instruction window where it will allow an SError exception to be consumed by the hypervisor without treating it as a hypervisor bug. This is used to consume asynchronous external abort that were caused by the guest. As we are about to add another location that survives unexpected exceptions, generalise this code to make it behave like the host's extable. KVM's version has to be mapped to EL2 to be accessible on nVHE systems. The SError vaxorcism code is a one instruction window, so has two entries in the extable. Because the KVM code is copied for VHE and nVHE, we end up with four entries, half of which correspond with code that isn't mapped. Cc: stable@vger.kernel.org # v4.14 Signed-off-by: James Morse Reviewed-by: Marc Zyngier Signed-off-by: Catalin Marinas Signed-off-by: Andre Przywara Signed-off-by: Greg Kroah-Hartman commit 11cc56821513e76b5f14b2669a9bba1f17b553a2 Author: Eugeniu Rosca Date: Fri Sep 4 16:35:30 2020 -0700 mm: slub: fix conversion of freelist_corrupted() commit dc07a728d49cf025f5da2c31add438d839d076c0 upstream. Commit 52f23478081ae0 ("mm/slub.c: fix corrupted freechain in deactivate_slab()") suffered an update when picked up from LKML [1]. Specifically, relocating 'freelist = NULL' into 'freelist_corrupted()' created a no-op statement. Fix it by sticking to the behavior intended in the original patch [1]. In addition, make freelist_corrupted() immune to passing NULL instead of &freelist. The issue has been spotted via static analysis and code review. [1] https://lore.kernel.org/linux-mm/20200331031450.12182-1-dongli.zhang@oracle.com/ Fixes: 52f23478081ae0 ("mm/slub.c: fix corrupted freechain in deactivate_slab()") Signed-off-by: Eugeniu Rosca Signed-off-by: Andrew Morton Cc: Dongli Zhang Cc: Joe Jin Cc: Christoph Lameter Cc: Pekka Enberg Cc: David Rientjes Cc: Joonsoo Kim Cc: Link: https://lkml.kernel.org/r/20200824130643.10291-1-erosca@de.adit-jv.com Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman commit eb71cd253b2adfbcb1f09636d18ee6394d6f774d Author: Ye Bin Date: Tue Sep 1 14:25:43 2020 +0800 dm thin metadata: Avoid returning cmd->bm wild pointer on error commit 219403d7e56f9b716ad80ab87db85d29547ee73e upstream. Maybe __create_persistent_data_objects() caller will use PTR_ERR as a pointer, it will lead to some strange things. Signed-off-by: Ye Bin Cc: stable@vger.kernel.org Signed-off-by: Mike Snitzer Signed-off-by: Greg Kroah-Hartman commit dd20b2c464a7b2db15126d3db2b69b4354b88f02 Author: Ye Bin Date: Tue Sep 1 14:25:42 2020 +0800 dm cache metadata: Avoid returning cmd->bm wild pointer on error commit d16ff19e69ab57e08bf908faaacbceaf660249de upstream. Maybe __create_persistent_data_objects() caller will use PTR_ERR as a pointer, it will lead to some strange things. Signed-off-by: Ye Bin Cc: stable@vger.kernel.org Signed-off-by: Mike Snitzer Signed-off-by: Greg Kroah-Hartman commit 7819f78f87e0f0ec3347a7a98f8b671931c2f11b Author: Tejun Heo Date: Wed Sep 2 12:32:45 2020 -0400 libata: implement ATA_HORKAGE_MAX_TRIM_128M and apply to Sandisks commit 3b5455636fe26ea21b4189d135a424a6da016418 upstream. All three generations of Sandisk SSDs lock up hard intermittently. Experiments showed that disabling NCQ lowered the failure rate significantly and the kernel has been disabling NCQ for some models of SD7's and 8's, which is obviously undesirable. Karthik worked with Sandisk to root cause the hard lockups to trim commands larger than 128M. This patch implements ATA_HORKAGE_MAX_TRIM_128M which limits max trim size to 128M and applies it to all three generations of Sandisk SSDs. Signed-off-by: Tejun Heo Cc: Karthik Shivaram Cc: stable@vger.kernel.org Signed-off-by: Jens Axboe Signed-off-by: Greg Kroah-Hartman commit 9f086cac518138da215f0b30db80776678142474 Author: Bart Van Assche Date: Wed Mar 14 15:48:06 2018 -0700 block: Move SECTOR_SIZE and SECTOR_SHIFT definitions into commit 233bde21aa43516baa013ef7ac33f3427056db3e upstream. It happens often while I'm preparing a patch for a block driver that I'm wondering: is a definition of SECTOR_SIZE and/or SECTOR_SHIFT available for this driver? Do I have to introduce definitions of these constants before I can use these constants? To avoid this confusion, move the existing definitions of SECTOR_SIZE and SECTOR_SHIFT into the header file such that these become available for all block drivers. Make the SECTOR_SIZE definition in the uapi msdos_fs.h header file conditional to avoid that including that header file after causes the compiler to complain about a SECTOR_SIZE redefinition. Note: the SECTOR_SIZE / SECTOR_SHIFT / SECTOR_BITS definitions have not been removed from uapi header files nor from NAND drivers in which these constants are used for another purpose than converting block layer offsets and sizes into a number of sectors. Cc: David S. Miller Cc: Mike Snitzer Cc: Dan Williams Cc: Minchan Kim Cc: Nitin Gupta Reviewed-by: Sergey Senozhatsky Reviewed-by: Christoph Hellwig Reviewed-by: Johannes Thumshirn Reviewed-by: Martin K. Petersen Signed-off-by: Bart Van Assche Signed-off-by: Jens Axboe Signed-off-by: Greg Kroah-Hartman commit b7aae706e84ac271f755a574d6a18fc9b42e8e8f Author: Ming Lei Date: Mon Aug 17 18:00:55 2020 +0800 block: allow for_each_bvec to support zero len bvec commit 7e24969022cbd61ddc586f14824fc205661bb124 upstream. Block layer usually doesn't support or allow zero-length bvec. Since commit 1bdc76aea115 ("iov_iter: use bvec iterator to implement iterate_bvec()"), iterate_bvec() switches to bvec iterator. However, Al mentioned that 'Zero-length segments are not disallowed' in iov_iter. Fixes for_each_bvec() so that it can move on after seeing one zero length bvec. Fixes: 1bdc76aea115 ("iov_iter: use bvec iterator to implement iterate_bvec()") Reported-by: syzbot Signed-off-by: Ming Lei Tested-by: Tetsuo Handa Cc: Al Viro Cc: Matthew Wilcox Cc: Link: https://www.mail-archive.com/linux-kernel@vger.kernel.org/msg2262077.html Signed-off-by: Jens Axboe Signed-off-by: Greg Kroah-Hartman commit b9857b87ffcc8069b6e02a03f954e1cd4b899e68 Author: Max Staudt Date: Thu Aug 27 17:49:00 2020 +0200 affs: fix basic permission bits to actually work commit d3a84a8d0dde4e26bc084b36ffcbdc5932ac85e2 upstream. The basic permission bits (protection bits in AmigaOS) have been broken in Linux' AFFS - it would only set bits, but never delete them. Also, contrary to the documentation, the Archived bit was not handled. Let's fix this for good, and set the bits such that Linux and classic AmigaOS can coexist in the most peaceful manner. Also, update the documentation to represent the current state of things. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable@vger.kernel.org Signed-off-by: Max Staudt Signed-off-by: David Sterba Signed-off-by: Greg Kroah-Hartman commit 955bd0c0a7ad72a65ce44c714d114b9a8eca9974 Author: Takashi Sakamoto Date: Sun Aug 23 16:55:45 2020 +0900 ALSA: firewire-digi00x: exclude Avid Adrenaline from detection commit acd46a6b6de88569654567810acad2b0a0a25cea upstream. Avid Adrenaline is reported that ALSA firewire-digi00x driver is bound to. However, as long as he investigated, the design of this model is hardly similar to the one of Digi 00x family. It's better to exclude the model from modalias of ALSA firewire-digi00x driver. This commit changes device entries so that the model is excluded. $ python3 crpp < ~/git/am-config-rom/misc/avid-adrenaline.img ROM header and bus information block ----------------------------------------------------------------- 400 04203a9c bus_info_length 4, crc_length 32, crc 15004 404 31333934 bus_name "1394" 408 e064a002 irmc 1, cmc 1, isc 1, bmc 0, cyc_clk_acc 100, max_rec 10 (2048) 40c 00a07e01 company_id 00a07e | 410 00085257 device_id 0100085257 | EUI-64 00a07e0100085257 root directory ----------------------------------------------------------------- 414 0005d08c directory_length 5, crc 53388 418 0300a07e vendor 41c 8100000c --> descriptor leaf at 44c 420 0c008380 node capabilities 424 8d000002 --> eui-64 leaf at 42c 428 d1000004 --> unit directory at 438 eui-64 leaf at 42c ----------------------------------------------------------------- 42c 0002410f leaf_length 2, crc 16655 430 00a07e01 company_id 00a07e | 434 00085257 device_id 0100085257 | EUI-64 00a07e0100085257 unit directory at 438 ----------------------------------------------------------------- 438 0004d6c9 directory_length 4, crc 54985 43c 1200a02d specifier id: 1394 TA 440 13014001 version: Vender Unique and AV/C 444 17000001 model 448 81000009 --> descriptor leaf at 46c descriptor leaf at 44c ----------------------------------------------------------------- 44c 00077205 leaf_length 7, crc 29189 450 00000000 textual descriptor 454 00000000 minimal ASCII 458 41766964 "Avid" 45c 20546563 " Tec" 460 686e6f6c "hnol" 464 6f677900 "ogy" 468 00000000 descriptor leaf at 46c ----------------------------------------------------------------- 46c 000599a5 leaf_length 5, crc 39333 470 00000000 textual descriptor 474 00000000 minimal ASCII 478 41647265 "Adre" 47c 6e616c69 "nali" 480 6e650000 "ne" Reported-by: Simon Wood Fixes: 9edf723fd858 ("ALSA: firewire-digi00x: add skeleton for Digi 002/003 family") Cc: # 4.4+ Signed-off-by: Takashi Sakamoto Link: https://lore.kernel.org/r/20200823075545.56305-1-o-takashi@sakamocchi.jp Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman commit 805aebc26ccafd3542c71aa7c99d0a9fa40dc8c5 Author: Kai Vehmanen Date: Wed Aug 26 20:03:06 2020 +0300 ALSA: hda/hdmi: always check pin power status in i915 pin fixup commit 858e0ad9301d1270c02b5aca97537d2d6ee9dd68 upstream. When system is suspended with active audio playback to HDMI/DP, two alternative sequences can happen at resume: a) monitor is detected first and ALSA prepare follows normal stream setup sequence, or b) ALSA prepare is called first, but monitor is not yet detected, so PCM is restarted without a pin, In case of (b), on i915 systems, haswell_verify_D0() is not called at resume and the pin power state may be incorrect. Result is lack of audio after resume with no error reported back to user-space. Fix the problem by always verifying converter and pin state in the i915_pin_cvt_fixup(). BugLink: https://github.com/thesofproject/linux/issues/2388 Signed-off-by: Kai Vehmanen Cc: Link: https://lore.kernel.org/r/20200826170306.701566-1-kai.vehmanen@linux.intel.com Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman commit e463aed86fcec8135b31112a1729b1c03d785a07 Author: Takashi Iwai Date: Tue Sep 1 15:18:02 2020 +0200 ALSA: pcm: oss: Remove superfluous WARN_ON() for mulaw sanity check commit 949a1ebe8cea7b342085cb6a4946b498306b9493 upstream. The PCM OSS mulaw plugin has a check of the format of the counter part whether it's a linear format. The check is with snd_BUG_ON() that emits WARN_ON() when the debug config is set, and it confuses syzkaller as if it were a serious issue. Let's drop snd_BUG_ON() for avoiding that. While we're at it, correct the error code to a more suitable, EINVAL. Reported-by: syzbot+23b22dc2e0b81cbfcc95@syzkaller.appspotmail.com Cc: Link: https://lore.kernel.org/r/20200901131802.18157-1-tiwai@suse.de Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman commit e8e9ec81957f61d458b5de0b324a18e0311cc7e2 Author: Tong Zhang Date: Mon Aug 24 18:45:41 2020 -0400 ALSA: ca0106: fix error code handling commit ee0761d1d8222bcc5c86bf10849dc86cf008557c upstream. snd_ca0106_spi_write() returns 1 on error, snd_ca0106_pcm_power_dac() is returning the error code directly, and the caller is expecting an negative error code Signed-off-by: Tong Zhang Cc: Link: https://lore.kernel.org/r/20200824224541.1260307-1-ztong0001@gmail.com Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman commit 30b0f412f39597da5fbff0d1d3a97c063c33fe4a Author: Rogan Dawes Date: Wed Jul 17 11:14:33 2019 +0200 usb: qmi_wwan: add D-Link DWM-222 A2 device ID [ Upstream commit 7d6053097311643545a8118100175a39bd6fa637 ] Signed-off-by: Rogan Dawes Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit 23e13527eccaf43004e8c19952e53a2a4424fbaa Author: Daniele Palmas Date: Wed Oct 9 11:07:18 2019 +0200 net: usb: qmi_wwan: add Telit 0x1050 composition [ Upstream commit e0ae2c578d3909e60e9448207f5d83f785f1129f ] This patch adds support for Telit FN980 0x1050 composition 0x1050: tty, adb, rmnet, tty, tty, tty, tty Signed-off-by: Daniele Palmas Acked-by: Bjørn Mork Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 80c8b74ce1fdf384c6ae43654501d9979802e8e1 Author: Josef Bacik Date: Mon Aug 10 11:42:27 2020 -0400 btrfs: fix potential deadlock in the search ioctl [ Upstream commit a48b73eca4ceb9b8a4b97f290a065335dbcd8a04 ] With the conversion of the tree locks to rwsem I got the following lockdep splat: ====================================================== WARNING: possible circular locking dependency detected 5.8.0-rc7-00165-g04ec4da5f45f-dirty #922 Not tainted ------------------------------------------------------ compsize/11122 is trying to acquire lock: ffff889fabca8768 (&mm->mmap_lock#2){++++}-{3:3}, at: __might_fault+0x3e/0x90 but task is already holding lock: ffff889fe720fe40 (btrfs-fs-00){++++}-{3:3}, at: __btrfs_tree_read_lock+0x39/0x180 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (btrfs-fs-00){++++}-{3:3}: down_write_nested+0x3b/0x70 __btrfs_tree_lock+0x24/0x120 btrfs_search_slot+0x756/0x990 btrfs_lookup_inode+0x3a/0xb4 __btrfs_update_delayed_inode+0x93/0x270 btrfs_async_run_delayed_root+0x168/0x230 btrfs_work_helper+0xd4/0x570 process_one_work+0x2ad/0x5f0 worker_thread+0x3a/0x3d0 kthread+0x133/0x150 ret_from_fork+0x1f/0x30 -> #1 (&delayed_node->mutex){+.+.}-{3:3}: __mutex_lock+0x9f/0x930 btrfs_delayed_update_inode+0x50/0x440 btrfs_update_inode+0x8a/0xf0 btrfs_dirty_inode+0x5b/0xd0 touch_atime+0xa1/0xd0 btrfs_file_mmap+0x3f/0x60 mmap_region+0x3a4/0x640 do_mmap+0x376/0x580 vm_mmap_pgoff+0xd5/0x120 ksys_mmap_pgoff+0x193/0x230 do_syscall_64+0x50/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #0 (&mm->mmap_lock#2){++++}-{3:3}: __lock_acquire+0x1272/0x2310 lock_acquire+0x9e/0x360 __might_fault+0x68/0x90 _copy_to_user+0x1e/0x80 copy_to_sk.isra.32+0x121/0x300 search_ioctl+0x106/0x200 btrfs_ioctl_tree_search_v2+0x7b/0xf0 btrfs_ioctl+0x106f/0x30a0 ksys_ioctl+0x83/0xc0 __x64_sys_ioctl+0x16/0x20 do_syscall_64+0x50/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 other info that might help us debug this: Chain exists of: &mm->mmap_lock#2 --> &delayed_node->mutex --> btrfs-fs-00 Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(btrfs-fs-00); lock(&delayed_node->mutex); lock(btrfs-fs-00); lock(&mm->mmap_lock#2); *** DEADLOCK *** 1 lock held by compsize/11122: #0: ffff889fe720fe40 (btrfs-fs-00){++++}-{3:3}, at: __btrfs_tree_read_lock+0x39/0x180 stack backtrace: CPU: 17 PID: 11122 Comm: compsize Kdump: loaded Not tainted 5.8.0-rc7-00165-g04ec4da5f45f-dirty #922 Hardware name: Quanta Tioga Pass Single Side 01-0030993006/Tioga Pass Single Side, BIOS F08_3A18 12/20/2018 Call Trace: dump_stack+0x78/0xa0 check_noncircular+0x165/0x180 __lock_acquire+0x1272/0x2310 lock_acquire+0x9e/0x360 ? __might_fault+0x3e/0x90 ? find_held_lock+0x72/0x90 __might_fault+0x68/0x90 ? __might_fault+0x3e/0x90 _copy_to_user+0x1e/0x80 copy_to_sk.isra.32+0x121/0x300 ? btrfs_search_forward+0x2a6/0x360 search_ioctl+0x106/0x200 btrfs_ioctl_tree_search_v2+0x7b/0xf0 btrfs_ioctl+0x106f/0x30a0 ? __do_sys_newfstat+0x5a/0x70 ? ksys_ioctl+0x83/0xc0 ksys_ioctl+0x83/0xc0 __x64_sys_ioctl+0x16/0x20 do_syscall_64+0x50/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 The problem is we're doing a copy_to_user() while holding tree locks, which can deadlock if we have to do a page fault for the copy_to_user(). This exists even without my locking changes, so it needs to be fixed. Rework the search ioctl to do the pre-fault and then copy_to_user_nofault for the copying. CC: stable@vger.kernel.org # 4.4+ Reviewed-by: Filipe Manana Signed-off-by: Josef Bacik Reviewed-by: David Sterba Signed-off-by: David Sterba Signed-off-by: Sasha Levin commit 6aa022755fa184cde7c1af02f45357d7f483b1f7 Author: Daniel Borkmann Date: Sat Nov 2 00:17:56 2019 +0100 uaccess: Add non-pagefault user-space write function [ Upstream commit 1d1585ca0f48fe7ed95c3571f3e4a82b2b5045dc ] Commit 3d7081822f7f ("uaccess: Add non-pagefault user-space read functions") missed to add probe write function, therefore factor out a probe_write_common() helper with most logic of probe_kernel_write() except setting KERNEL_DS, and add a new probe_user_write() helper so it can be used from BPF side. Again, on some archs, the user address space and kernel address space can co-exist and be overlapping, so in such case, setting KERNEL_DS would mean that the given address is treated as being in kernel address space. Signed-off-by: Daniel Borkmann Signed-off-by: Alexei Starovoitov Acked-by: Andrii Nakryiko Cc: Masami Hiramatsu Link: https://lore.kernel.org/bpf/9df2542e68141bfa3addde631441ee45503856a8.1572649915.git.daniel@iogearbox.net Signed-off-by: Sasha Levin commit f4abfb03a387c0991dc9de3a5512fa84ab0663b9 Author: Masami Hiramatsu Date: Wed May 15 14:38:18 2019 +0900 uaccess: Add non-pagefault user-space read functions [ Upstream commit 3d7081822f7f9eab867d9bcc8fd635208ec438e0 ] Add probe_user_read(), strncpy_from_unsafe_user() and strnlen_unsafe_user() which allows caller to access user-space in IRQ context. Current probe_kernel_read() and strncpy_from_unsafe() are not available for user-space memory, because it sets KERNEL_DS while accessing data. On some arch, user address space and kernel address space can be co-exist, but others can not. In that case, setting KERNEL_DS means given address is treated as a kernel address space. Also strnlen_user() is only available from user context since it can sleep if pagefault is enabled. To access user-space memory without pagefault, we need these new functions which sets USER_DS while accessing the data. Link: http://lkml.kernel.org/r/155789869802.26965.4940338412595759063.stgit@devnote2 Acked-by: Ingo Molnar Signed-off-by: Masami Hiramatsu Signed-off-by: Steven Rostedt (VMware) Signed-off-by: Sasha Levin commit a6d4a84d569f49affa53959889d2b9acf885a97c Author: Josef Bacik Date: Mon Aug 10 11:42:31 2020 -0400 btrfs: set the lockdep class for log tree extent buffers [ Upstream commit d3beaa253fd6fa40b8b18a216398e6e5376a9d21 ] These are special extent buffers that get rewound in order to lookup the state of the tree at a specific point in time. As such they do not go through the normal initialization paths that set their lockdep class, so handle them appropriately when they are created and before they are locked. CC: stable@vger.kernel.org # 4.4+ Reviewed-by: Filipe Manana Signed-off-by: Josef Bacik Reviewed-by: David Sterba Signed-off-by: David Sterba Signed-off-by: Sasha Levin commit 8ab36da262fd529059045e41b4d5af387bae833f Author: Nikolay Borisov Date: Wed Aug 15 18:26:54 2018 +0300 btrfs: Remove extraneous extent_buffer_get from tree_mod_log_rewind [ Upstream commit 24cee18a1c1d7c731ea5987e0c99daea22ae7f4a ] When a rewound buffer is created it already has a ref count of 1 and the dummy flag set. Then another ref is taken bumping the count to 2. Finally when this buffer is released from btrfs_release_path the extra reference is decremented by the special handling code in free_extent_buffer. However, this special code is in fact redundant sinca ref count of 1 is still correct since the buffer is only accessed via btrfs_path struct. This paves the way forward of removing the special handling in free_extent_buffer. Signed-off-by: Nikolay Borisov Reviewed-by: David Sterba Signed-off-by: David Sterba Signed-off-by: Sasha Levin commit e23efd6da3a660168a053122b6e26917231bfcdf Author: Nikolay Borisov Date: Wed Aug 15 18:26:53 2018 +0300 btrfs: Remove redundant extent_buffer_get in get_old_root [ Upstream commit 6c122e2a0c515cfb3f3a9cefb5dad4cb62109c78 ] get_old_root used used only by btrfs_search_old_slot to initialise the path structure. The old root is always a cloned buffer (either via alloc dummy or via btrfs_clone_extent_buffer) and its reference count is 2: 1 from allocation, 1 from extent_buffer_get call in get_old_root. This latter explicit ref count acquire operation is in fact unnecessary since the semantic is such that the newly allocated buffer is handed over to the btrfs_path for lifetime management. Considering this just remove the extra extent_buffer_get in get_old_root. Signed-off-by: Nikolay Borisov Reviewed-by: David Sterba Signed-off-by: David Sterba Signed-off-by: Sasha Levin commit 72de52916de69cce0b3f85198e656252ce236a81 Author: Josef Bacik Date: Mon Aug 10 11:42:26 2020 -0400 btrfs: drop path before adding new uuid tree entry commit 9771a5cf937129307d9f58922d60484d58ababe7 upstream. With the conversion of the tree locks to rwsem I got the following lockdep splat: ====================================================== WARNING: possible circular locking dependency detected 5.8.0-rc7-00167-g0d7ba0c5b375-dirty #925 Not tainted ------------------------------------------------------ btrfs-uuid/7955 is trying to acquire lock: ffff88bfbafec0f8 (btrfs-root-00){++++}-{3:3}, at: __btrfs_tree_read_lock+0x39/0x180 but task is already holding lock: ffff88bfbafef2a8 (btrfs-uuid-00){++++}-{3:3}, at: __btrfs_tree_read_lock+0x39/0x180 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (btrfs-uuid-00){++++}-{3:3}: down_read_nested+0x3e/0x140 __btrfs_tree_read_lock+0x39/0x180 __btrfs_read_lock_root_node+0x3a/0x50 btrfs_search_slot+0x4bd/0x990 btrfs_uuid_tree_add+0x89/0x2d0 btrfs_uuid_scan_kthread+0x330/0x390 kthread+0x133/0x150 ret_from_fork+0x1f/0x30 -> #0 (btrfs-root-00){++++}-{3:3}: __lock_acquire+0x1272/0x2310 lock_acquire+0x9e/0x360 down_read_nested+0x3e/0x140 __btrfs_tree_read_lock+0x39/0x180 __btrfs_read_lock_root_node+0x3a/0x50 btrfs_search_slot+0x4bd/0x990 btrfs_find_root+0x45/0x1b0 btrfs_read_tree_root+0x61/0x100 btrfs_get_root_ref.part.50+0x143/0x630 btrfs_uuid_tree_iterate+0x207/0x314 btrfs_uuid_rescan_kthread+0x12/0x50 kthread+0x133/0x150 ret_from_fork+0x1f/0x30 other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(btrfs-uuid-00); lock(btrfs-root-00); lock(btrfs-uuid-00); lock(btrfs-root-00); *** DEADLOCK *** 1 lock held by btrfs-uuid/7955: #0: ffff88bfbafef2a8 (btrfs-uuid-00){++++}-{3:3}, at: __btrfs_tree_read_lock+0x39/0x180 stack backtrace: CPU: 73 PID: 7955 Comm: btrfs-uuid Kdump: loaded Not tainted 5.8.0-rc7-00167-g0d7ba0c5b375-dirty #925 Hardware name: Quanta Tioga Pass Single Side 01-0030993006/Tioga Pass Single Side, BIOS F08_3A18 12/20/2018 Call Trace: dump_stack+0x78/0xa0 check_noncircular+0x165/0x180 __lock_acquire+0x1272/0x2310 lock_acquire+0x9e/0x360 ? __btrfs_tree_read_lock+0x39/0x180 ? btrfs_root_node+0x1c/0x1d0 down_read_nested+0x3e/0x140 ? __btrfs_tree_read_lock+0x39/0x180 __btrfs_tree_read_lock+0x39/0x180 __btrfs_read_lock_root_node+0x3a/0x50 btrfs_search_slot+0x4bd/0x990 btrfs_find_root+0x45/0x1b0 btrfs_read_tree_root+0x61/0x100 btrfs_get_root_ref.part.50+0x143/0x630 btrfs_uuid_tree_iterate+0x207/0x314 ? btree_readpage+0x20/0x20 btrfs_uuid_rescan_kthread+0x12/0x50 kthread+0x133/0x150 ? kthread_create_on_node+0x60/0x60 ret_from_fork+0x1f/0x30 This problem exists because we have two different rescan threads, btrfs_uuid_scan_kthread which creates the uuid tree, and btrfs_uuid_tree_iterate that goes through and updates or deletes any out of date roots. The problem is they both do things in different order. btrfs_uuid_scan_kthread() reads the tree_root, and then inserts entries into the uuid_root. btrfs_uuid_tree_iterate() scans the uuid_root, but then does a btrfs_get_fs_root() which can read from the tree_root. It's actually easy enough to not be holding the path in btrfs_uuid_scan_kthread() when we add a uuid entry, as we already drop it further down and re-start the search when we loop. So simply move the path release before we add our entry to the uuid tree. This also fixes a problem where we're holding a path open after we do btrfs_end_transaction(), which has it's own problems. CC: stable@vger.kernel.org # 4.4+ Reviewed-by: Filipe Manana Signed-off-by: Josef Bacik Reviewed-by: David Sterba Signed-off-by: David Sterba Signed-off-by: Greg Kroah-Hartman commit 5ace0847122fb22f18a20fb7809339cb3d789f01 Author: Jason Gunthorpe Date: Fri Sep 4 16:36:19 2020 -0700 include/linux/log2.h: add missing () around n in roundup_pow_of_two() [ Upstream commit 428fc0aff4e59399ec719ffcc1f7a5d29a4ee476 ] Otherwise gcc generates warnings if the expression is complicated. Fixes: 312a0c170945 ("[PATCH] LOG2: Alter roundup_pow_of_two() so that it can use a ilog2() on a constant") Signed-off-by: Jason Gunthorpe Signed-off-by: Andrew Morton Link: https://lkml.kernel.org/r/0-v1-8a2697e3c003+41165-log_brackets_jgg@nvidia.com Signed-off-by: Linus Torvalds Signed-off-by: Sasha Levin commit 905f44ec6e0eaca2c73b2a92b02c0731530384ca Author: Tony Lindgren Date: Mon Jul 6 11:33:38 2020 -0700 thermal: ti-soc-thermal: Fix bogus thermal shutdowns for omap4430 [ Upstream commit 30d24faba0532d6972df79a1bf060601994b5873 ] We can sometimes get bogus thermal shutdowns on omap4430 at least with droid4 running idle with a battery charger connected: thermal thermal_zone0: critical temperature reached (143 C), shutting down Dumping out the register values shows we can occasionally get a 0x7f value that is outside the TRM listed values in the ADC conversion table. And then we get a normal value when reading again after that. Reading the register multiple times does not seem help avoiding the bogus values as they stay until the next sample is ready. Looking at the TRM chapter "18.4.10.2.3 ADC Codes Versus Temperature", we should have values from 13 to 107 listed with a total of 95 values. But looking at the omap4430_adc_to_temp array, the values are off, and the end values are missing. And it seems that the 4430 ADC table is similar to omap3630 rather than omap4460. Let's fix the issue by using values based on the omap3630 table and just ignoring invalid values. Compared to the 4430 TRM, the omap3630 table has the missing values added while the TRM table only shows every second value. Note that sometimes the ADC register values within the valid table can also be way off for about 1 out of 10 values. But it seems that those just show about 25 C too low values rather than too high values. So those do not cause a bogus thermal shutdown. Fixes: 1a31270e54d7 ("staging: omap-thermal: add OMAP4 data structures") Cc: Merlijn Wajer Cc: Pavel Machek Cc: Sebastian Reichel Signed-off-by: Tony Lindgren Signed-off-by: Daniel Lezcano Link: https://lore.kernel.org/r/20200706183338.25622-1-tony@atomide.com Signed-off-by: Sasha Levin commit deb5efa71e6d51405beaee4715536be5541f6cb4 Author: Lu Baolu Date: Fri Aug 28 08:06:15 2020 +0800 iommu/vt-d: Serialize IOMMU GCMD register modifications [ Upstream commit 6e4e9ec65078093165463c13d4eb92b3e8d7b2e8 ] The VT-d spec requires (10.4.4 Global Command Register, GCMD_REG General Description) that: If multiple control fields in this register need to be modified, software must serialize the modifications through multiple writes to this register. However, in irq_remapping.c, modifications of IRE and CFI are done in one write. We need to do two separate writes with STS checking after each. It also checks the status register before writing command register to avoid unnecessary register write. Fixes: af8d102f999a4 ("x86/intel/irq_remapping: Clean up x2apic opt-out security warning mess") Signed-off-by: Lu Baolu Reviewed-by: Kevin Tian Cc: Andy Lutomirski Cc: Jacob Pan Cc: Kevin Tian Cc: Ashok Raj Link: https://lore.kernel.org/r/20200828000615.8281-1-baolu.lu@linux.intel.com Signed-off-by: Joerg Roedel Signed-off-by: Sasha Levin commit 751deef5de35a497a3ea007e0953889ba1123a97 Author: Michael Chan Date: Thu Sep 3 14:28:54 2020 -0400 tg3: Fix soft lockup when tg3_reset_task() fails. [ Upstream commit 556699341efa98243e08e34401b3f601da91f5a3 ] If tg3_reset_task() fails, the device state is left in an inconsistent state with IFF_RUNNING still set but NAPI state not enabled. A subsequent operation, such as ifdown or AER error can cause it to soft lock up when it tries to disable NAPI state. Fix it by bringing down the device to !IFF_RUNNING state when tg3_reset_task() fails. tg3_reset_task() running from workqueue will now call tg3_close() when the reset fails. We need to modify tg3_reset_task_cancel() slightly to avoid tg3_close() calling cancel_work_sync() to cancel tg3_reset_task(). Otherwise cancel_work_sync() will wait forever for tg3_reset_task() to finish. Reported-by: David Christensen Reported-by: Baptiste Covolato Fixes: db2199737990 ("tg3: Schedule at most one tg3_reset_task run") Signed-off-by: Michael Chan Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit c5c6e00f6cc5d3ed0d6464b14e33f2f5c8505888 Author: Al Viro Date: Wed Sep 2 11:30:48 2020 -0400 fix regression in "epoll: Keep a reference on files added to the check list" [ Upstream commit 77f4689de17c0887775bb77896f4cc11a39bf848 ] epoll_loop_check_proc() can run into a file already committed to destruction; we can't grab a reference on those and don't need to add them to the set for reverse path check anyway. Tested-by: Marc Zyngier Fixes: a9ed4a6560b8 ("epoll: Keep a reference on files added to the check list") Signed-off-by: Al Viro Signed-off-by: Sasha Levin commit cfb5e057b7179767d6f3cef3381633417e4e3afb Author: Shung-Hsi Yu Date: Mon Aug 31 22:37:09 2020 +0800 net: ethernet: mlx4: Fix memory allocation in mlx4_buddy_init() [ Upstream commit cbedcb044e9cc4e14bbe6658111224bb923094f4 ] On machines with much memory (> 2 TByte) and log_mtts_per_seg == 0, a max_order of 31 will be passed to mlx_buddy_init(), which results in s = BITS_TO_LONGS(1 << 31) becoming a negative value, leading to kvmalloc_array() failure when it is converted to size_t. mlx4_core 0000:b1:00.0: Failed to initialize memory region table, aborting mlx4_core: probe of 0000:b1:00.0 failed with error -12 Fix this issue by changing the left shifting operand from a signed literal to an unsigned one. Fixes: 225c7b1feef1 ("IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters") Signed-off-by: Shung-Hsi Yu Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit dcd257f64ca5340ad96739c917f353383705a057 Author: Al Grant Date: Tue Sep 1 12:10:14 2020 -0300 perf tools: Correct SNOOPX field offset [ Upstream commit 39c0a53b114d0317e5c4e76b631f41d133af5cb0 ] perf_event.h has macros that define the field offsets in the data_src bitmask in perf records. The SNOOPX and REMOTE offsets were both 37. These are distinct fields, and the bitfield layout in perf_mem_data_src confirms that SNOOPX should be at offset 38. Committer notes: This was extracted from a larger patch that also contained kernel changes. Fixes: 52839e653b5629bd ("perf tools: Add support for printing new mem_info encodings") Signed-off-by: Al Grant Reviewed-by: Andi Kleen Cc: Adrian Hunter Cc: Ian Rogers Cc: Jiri Olsa Cc: Namhyung Kim Cc: Peter Zijlstra Link: http://lore.kernel.org/lkml/9974f2d0-bf7f-518e-d9f7-4520e5ff1bb0@foss.arm.com Signed-off-by: Arnaldo Carvalho de Melo Signed-off-by: Sasha Levin commit 41cb677dad4c9cd424405e0d10c509ae4cdc7a9c Author: Christophe JAILLET Date: Fri Aug 21 09:58:19 2020 +0200 nvmet-fc: Fix a missed _irqsave version of spin_lock in 'nvmet_fc_fod_op_done()' [ Upstream commit 70e37988db94aba607d5491a94f80ba08e399b6b ] The way 'spin_lock()' and 'spin_lock_irqsave()' are used is not consistent in this function. Use 'spin_lock_irqsave()' also here, as there is no guarantee that interruptions are disabled at that point, according to surrounding code. Fixes: a97ec51b37ef ("nvmet_fc: Rework target side abort handling") Signed-off-by: Christophe JAILLET Reviewed-by: Christoph Hellwig Signed-off-by: Sagi Grimberg Signed-off-by: Sasha Levin commit 58a6d70b26c47b317254b2aec6486d34faca267a Author: Vasundhara Volam Date: Wed Aug 26 01:08:35 2020 -0400 bnxt_en: Fix PCI AER error recovery flow [ Upstream commit df3875ec550396974b1d8a518bd120d034738236 ] When a PCI error is detected the PCI state could be corrupt, save the PCI state after initialization and restore it after the slot reset. Fixes: 6316ea6db93d ("bnxt_en: Enable AER support.") Signed-off-by: Vasundhara Volam Signed-off-by: Michael Chan Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit e19de8e3c0a64887f66907bab9c322e8bd518765 Author: Vasundhara Volam Date: Wed Aug 26 01:08:33 2020 -0400 bnxt_en: Check for zero dir entries in NVRAM. [ Upstream commit dbbfa96ad920c50d58bcaefa57f5f33ceef9d00e ] If firmware goes into unstable state, HWRM_NVM_GET_DIR_INFO firmware command may return zero dir entries. Return error in such case to avoid zero length dma buffer request. Fixes: c0c050c58d84 ("bnxt_en: New Broadcom ethernet driver.") Signed-off-by: Vasundhara Volam Signed-off-by: Michael Chan Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit c05e296d77100102cf958a9ac65c556259cf53d5 Author: Nicolas Dichtel Date: Tue Aug 25 14:59:40 2020 +0200 gtp: add GTPA_LINK info to msg sent to userspace [ Upstream commit b274e47d9e3f4dcd4ad4028a316ec22dc4533ac7 ] During a dump, this attribute is essential, it enables the userspace to know on which interface the context is linked to. Fixes: 459aa660eb1d ("gtp: add initial driver for datapath of GPRS Tunneling Protocol (GTP-U)") Signed-off-by: Nicolas Dichtel Tested-by: Gabriel Ganne Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit b879326610bb45707f384d4a0eae4f819fb7cf2a Author: Marek Szyprowski Date: Tue Aug 25 08:46:17 2020 +0200 dmaengine: pl330: Fix burst length if burst size is smaller than bus width [ Upstream commit 0661cef675d37e2c4b66a996389ebeae8568e49e ] Move the burst len fixup after setting the generic value for it. This finally enables the fixup introduced by commit 137bd11090d8 ("dmaengine: pl330: Align DMA memcpy operations to MFIFO width"), which otherwise was overwritten by the generic value. Reported-by: kernel test robot Fixes: 137bd11090d8 ("dmaengine: pl330: Align DMA memcpy operations to MFIFO width") Signed-off-by: Marek Szyprowski Link: https://lore.kernel.org/r/20200825064617.16193-1-m.szyprowski@samsung.com Signed-off-by: Vinod Koul Signed-off-by: Sasha Levin commit 007a4850de1f29fcdb7020865874b203bb6921e3 Author: Dinghao Liu Date: Sun Aug 23 16:56:47 2020 +0800 net: arc_emac: Fix memleak in arc_mdio_probe [ Upstream commit e2d79cd8875fa8c3cc7defa98a8cc99a1ed0c62f ] When devm_gpiod_get_optional() fails, bus should be freed just like when of_mdiobus_register() fails. Fixes: 1bddd96cba03d ("net: arc_emac: support the phy reset for emac driver") Signed-off-by: Dinghao Liu Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit 1f5c83c394225998101781c077aaa40424645089 Author: Yuusuke Ashizuka Date: Thu Aug 20 18:43:07 2020 +0900 ravb: Fixed to be able to unload modules [ Upstream commit 1838d6c62f57836639bd3d83e7855e0ee4f6defc ] When this driver is built as a module, I cannot rmmod it after insmoding it. This is because that this driver calls ravb_mdio_init() at the time of probe, and module->refcnt is incremented by alloc_mdio_bitbang() called after that. Therefore, even if ifup is not performed, the driver is in use and rmmod cannot be performed. $ lsmod Module Size Used by ravb 40960 1 $ rmmod ravb rmmod: ERROR: Module ravb is in use Call ravb_mdio_init() at open and free_mdio_bitbang() at close, thereby rmmod is possible in the ifdown state. Fixes: c156633f1353 ("Renesas Ethernet AVB driver proper") Signed-off-by: Yuusuke Ashizuka Reviewed-by: Sergei Shtylyov Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit 4b0a22bd0d496c562c34592c23f445540ca88f6b Author: Dinghao Liu Date: Mon Aug 24 13:58:31 2020 +0800 net: systemport: Fix memleak in bcm_sysport_probe [ Upstream commit 7ef1fc57301f3cef7201497aa27e89ccb91737fe ] When devm_kcalloc() fails, dev should be freed just like what we've done in the subsequent error paths. Fixes: 7b78be48a8eb6 ("net: systemport: Dynamically allocate number of TX rings") Signed-off-by: Dinghao Liu Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit 9de4fede0b351128162d4e3612b33e34352a66a5 Author: Dinghao Liu Date: Mon Aug 24 13:44:42 2020 +0800 net: hns: Fix memleak in hns_nic_dev_probe [ Upstream commit 100e3345c6e719d2291e1efd5de311cc24bb9c0b ] hns_nic_dev_probe allocates ndev, but not free it on two error handling paths, which may lead to memleak. Fixes: 63434888aaf1b ("net: hns: net: hns: enet adds support of acpi") Signed-off-by: Dinghao Liu Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit 1e1fc7726b1775058d56aa3540f98eb2ec9e07a1 Author: Florian Westphal Date: Thu Aug 20 21:05:50 2020 +0200 netfilter: nf_tables: fix destination register zeroing [ Upstream commit 1e105e6afa6c3d32bfb52c00ffa393894a525c27 ] Following bug was reported via irc: nft list ruleset set knock_candidates_ipv4 { type ipv4_addr . inet_service size 65535 elements = { 127.0.0.1 . 123, 127.0.0.1 . 123 } } .. udp dport 123 add @knock_candidates_ipv4 { ip saddr . 123 } udp dport 123 add @knock_candidates_ipv4 { ip saddr . udp dport } It should not have been possible to add a duplicate set entry. After some debugging it turned out that the problem is the immediate value (123) in the second-to-last rule. Concatenations use 32bit registers, i.e. the elements are 8 bytes each, not 6 and it turns out the kernel inserted inet firewall @knock_candidates_ipv4 element 0100007f ffff7b00 : 0 [end] element 0100007f 00007b00 : 0 [end] Note the non-zero upper bits of the first element. It turns out that nft_immediate doesn't zero the destination register, but this is needed when the length isn't a multiple of 4. Furthermore, the zeroing in nft_payload is broken. We can't use [len / 4] = 0 -- if len is a multiple of 4, index is off by one. Skip zeroing in this case and use a conditional instead of (len -1) / 4. Fixes: 49499c3e6e18 ("netfilter: nf_tables: switch registers to 32 bit addressing") Signed-off-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso Signed-off-by: Sasha Levin commit b2e1d023e026d89e28f637013a9b38c0f3ed4179 Author: Pablo Neira Ayuso Date: Thu Aug 20 14:12:55 2020 +0200 netfilter: nf_tables: incorrect enum nft_list_attributes definition [ Upstream commit da9125df854ea48a6240c66e8a67be06e2c12c03 ] This should be NFTA_LIST_UNSPEC instead of NFTA_LIST_UNPEC, all other similar attribute definitions are postfixed with _UNSPEC. Fixes: 96518518cc41 ("netfilter: add nftables") Signed-off-by: Pablo Neira Ayuso Signed-off-by: Sasha Levin commit cfb399059d505705779930fc995cfe701b6f3c5b Author: Pablo Neira Ayuso Date: Thu Aug 20 14:12:54 2020 +0200 netfilter: nf_tables: add NFTA_SET_USERDATA if not null [ Upstream commit 6f03bf43ee05b31d3822def2a80f11b3591c55b3 ] Kernel sends an empty NFTA_SET_USERDATA attribute with no value if userspace adds a set with no NFTA_SET_USERDATA attribute. Fixes: e6d8ecac9e68 ("netfilter: nf_tables: Add new attributes into nft_set to store user data.") Signed-off-by: Pablo Neira Ayuso Signed-off-by: Sasha Levin commit f1a5d69cebeceb38476353c974ee0d555fc2dd71 Author: Florian Fainelli Date: Wed Aug 19 11:26:45 2020 -0700 MIPS: BMIPS: Also call bmips_cpu_setup() for secondary cores [ Upstream commit e14f633b66902615cf7faa5d032b45ab8b6fb158 ] The initialization done by bmips_cpu_setup() typically affects both threads of a given core, on 7435 which supports 2 cores and 2 threads, logical CPU number 2 and 3 would not run this initialization. Fixes: 738a3f79027b ("MIPS: BMIPS: Add early CPU initialization code") Signed-off-by: Florian Fainelli Signed-off-by: Thomas Bogendoerfer Signed-off-by: Sasha Levin commit 4c65a7832377893c68b3f347450194edfc097fe1 Author: Florian Fainelli Date: Wed Aug 19 11:26:44 2020 -0700 MIPS: mm: BMIPS5000 has inclusive physical caches [ Upstream commit dbfc95f98f0158958d1f1e6bf06d74be38dbd821 ] When the BMIPS generic cpu-feature-overrides.h file was introduced, cpu_has_inclusive_caches/MIPS_CPU_INCLUSIVE_CACHES was not set for BMIPS5000 CPUs. Correct this when we have initialized the MIPS secondary cache successfully. Fixes: f337967d6d87 ("MIPS: BMIPS: Add cpu-feature-overrides.h") Signed-off-by: Florian Fainelli Signed-off-by: Thomas Bogendoerfer Signed-off-by: Sasha Levin commit 1eac2071cbb4ac3516192a8a92965bbd68b54332 Author: Yu Kuai Date: Mon Aug 17 19:57:26 2020 +0800 dmaengine: at_hdmac: check return value of of_find_device_by_node() in at_dma_xlate() [ Upstream commit 0cef8e2c5a07d482ec907249dbd6687e8697677f ] The reurn value of of_find_device_by_node() is not checked, thus null pointer dereference will be triggered if of_find_device_by_node() failed. Fixes: bbe89c8e3d59 ("at_hdmac: move to generic DMA binding") Signed-off-by: Yu Kuai Link: https://lore.kernel.org/r/20200817115728.1706719-2-yukuai3@huawei.com Signed-off-by: Vinod Koul Signed-off-by: Sasha Levin commit fda74a64f5801ad6a0e0f51138ca2dcd02eaf776 Author: Jussi Kivilinna Date: Tue Aug 18 17:46:10 2020 +0300 batman-adv: bla: use netif_rx_ni when not in interrupt context [ Upstream commit 279e89b2281af3b1a9f04906e157992c19c9f163 ] batadv_bla_send_claim() gets called from worker thread context through batadv_bla_periodic_work(), thus netif_rx_ni needs to be used in that case. This fixes "NOHZ: local_softirq_pending 08" log messages seen when batman-adv is enabled. Fixes: 23721387c409 ("batman-adv: add basic bridge loop avoidance code") Signed-off-by: Jussi Kivilinna Signed-off-by: Sven Eckelmann Signed-off-by: Simon Wunderlich Signed-off-by: Sasha Levin commit 3e0e9d5e20aa6d7381076e28f641091376d72307 Author: Linus Lüssing Date: Thu Jul 23 14:28:08 2020 +0200 batman-adv: Fix own OGM check in aggregated OGMs [ Upstream commit d8bf0c01642275c7dca1e5d02c34e4199c200b1f ] The own OGM check is currently misplaced and can lead to the following issues: For one thing we might receive an aggregated OGM from a neighbor node which has our own OGM in the first place. We would then not only skip our own OGM but erroneously also any other, following OGM in the aggregate. For another, we might receive an OGM aggregate which has our own OGM in a place other then the first one. Then we would wrongly not skip this OGM, leading to populating the orginator and gateway table with ourself. Fixes: 9323158ef9f4 ("batman-adv: OGMv2 - implement originators logic") Signed-off-by: Linus Lüssing Signed-off-by: Sven Eckelmann Signed-off-by: Simon Wunderlich Signed-off-by: Sasha Levin commit 8ddda2d99d1d9cee1d3601eca3111479e83e423e Author: Sven Eckelmann Date: Wed Jul 22 20:36:43 2020 +0200 batman-adv: Avoid uninitialized chaddr when handling DHCP [ Upstream commit 303216e76dcab6049c9d42390b1032f0649a8206 ] The gateway client code can try to optimize the delivery of DHCP packets to avoid broadcasting them through the whole mesh. But also transmissions to the client can be optimized by looking up the destination via the chaddr of the DHCP packet. But the chaddr is currently only done when chaddr is fully inside the non-paged area of the skbuff. Otherwise it will not be initialized and the unoptimized path should have been taken. But the implementation didn't handle this correctly. It didn't retrieve the correct chaddr but still tried to perform the TT lookup with this uninitialized memory. Reported-by: syzbot+ab16e463b903f5a37036@syzkaller.appspotmail.com Fixes: 6c413b1c22a2 ("batman-adv: send every DHCP packet as bat-unicast") Signed-off-by: Sven Eckelmann Acked-by: Antonio Quartulli Signed-off-by: Simon Wunderlich Signed-off-by: Sasha Levin commit 34f79cd0d1bfb9c597e18893bebbec3ed3c017d5 Author: Peter Ujfalusi Date: Thu Aug 6 13:49:28 2020 +0300 dmaengine: of-dma: Fix of_dma_router_xlate's of_dma_xlate handling [ Upstream commit 5b2aa9f918f6837ae943557f8cec02c34fcf80e7 ] of_dma_xlate callback can return ERR_PTR as well NULL in case of failure. If error code is returned (not NULL) then the route should be released and the router should not be registered for the channel. Fixes: 56f13c0d9524c ("dmaengine: of_dma: Support for DMA routers") Signed-off-by: Peter Ujfalusi Link: https://lore.kernel.org/r/20200806104928.25975-1-peter.ujfalusi@ti.com Signed-off-by: Vinod Koul Signed-off-by: Sasha Levin commit 570e187371203b09f78768a2e708b2563cc163a8 Author: Simon Leiner Date: Tue Aug 25 11:31:52 2020 +0200 xen/xenbus: Fix granting of vmalloc'd memory [ Upstream commit d742db70033c745e410523e00522ee0cfe2aa416 ] On some architectures (like ARM), virt_to_gfn cannot be used for vmalloc'd memory because of its reliance on virt_to_phys. This patch introduces a check for vmalloc'd addresses and obtains the PFN using vmalloc_to_pfn in that case. Signed-off-by: Simon Leiner Reviewed-by: Stefano Stabellini Link: https://lore.kernel.org/r/20200825093153.35500-1-simon@leiner.me Signed-off-by: Juergen Gross Signed-off-by: Sasha Levin commit 67e89bc48ac8e5505d04d98b0eac1c00e1f1f9eb Author: Sven Schnelle Date: Thu Aug 20 09:48:23 2020 +0200 s390: don't trace preemption in percpu macros [ Upstream commit 1196f12a2c960951d02262af25af0bb1775ebcc2 ] Since commit a21ee6055c30 ("lockdep: Change hardirq{s_enabled,_context} to per-cpu variables") the lockdep code itself uses percpu variables. This leads to recursions because the percpu macros are calling preempt_enable() which might call trace_preempt_on(). Signed-off-by: Sven Schnelle Reviewed-by: Vasily Gorbik Signed-off-by: Vasily Gorbik Signed-off-by: Sasha Levin commit 6f324263b54e13a0bf07cb141e6ee67c0aaaae5d Author: Peter Zijlstra Date: Thu Aug 20 16:47:24 2020 +0200 cpuidle: Fixup IRQ state [ Upstream commit 49d9c5936314e44d314c605c39cce0fd947f9c3a ] Match the pattern elsewhere in this file. Signed-off-by: Peter Zijlstra (Intel) Reviewed-by: Steven Rostedt (VMware) Reviewed-by: Thomas Gleixner Acked-by: Rafael J. Wysocki Tested-by: Marco Elver Link: https://lkml.kernel.org/r/20200821085348.251340558@infradead.org Signed-off-by: Sasha Levin commit 1dd11998941e98885449e9745043e918f11baf20 Author: Jeff Layton Date: Thu Aug 20 11:00:26 2020 -0400 ceph: don't allow setlease on cephfs [ Upstream commit 496ceaf12432b3d136dcdec48424312e71359ea7 ] Leases don't currently work correctly on kcephfs, as they are not broken when caps are revoked. They could eventually be implemented similarly to how we did them in libcephfs, but for now don't allow them. [ idryomov: no need for simple_nosetlease() in ceph_dir_fops and ceph_snapdir_fops ] Signed-off-by: Jeff Layton Reviewed-by: Ilya Dryomov Signed-off-by: Ilya Dryomov Signed-off-by: Sasha Levin commit 06ced97a6ec86383cb020c4ff9da71355666d089 Author: Amit Engel Date: Wed Aug 19 11:31:11 2020 +0300 nvmet: Disable keep-alive timer when kato is cleared to 0h [ Upstream commit 0d3b6a8d213a30387b5104b2fb25376d18636f23 ] Based on nvme spec, when keep alive timeout is set to zero the keep-alive timer should be disabled. Signed-off-by: Amit Engel Signed-off-by: Sagi Grimberg Signed-off-by: Jens Axboe Signed-off-by: Sasha Levin commit 3e740e7637a1434635f067af5502d1537c0906b9 Author: Tom Rix Date: Thu Aug 20 06:19:32 2020 -0700 hwmon: (applesmc) check status earlier. [ Upstream commit cecf7560f00a8419396a2ed0f6e5d245ccb4feac ] clang static analysis reports this representative problem applesmc.c:758:10: warning: 1st function call argument is an uninitialized value left = be16_to_cpu(*(__be16 *)(buffer + 6)) >> 2; ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ buffer is filled by the earlier call ret = applesmc_read_key(LIGHT_SENSOR_LEFT_KEY, ... This problem is reported because a goto skips the status check. Other similar problems use data from applesmc_read_key before checking the status. So move the checks to before the use. Signed-off-by: Tom Rix Reviewed-by: Henrik Rydberg Link: https://lore.kernel.org/r/20200820131932.10590-1-trix@redhat.com Signed-off-by: Guenter Roeck Signed-off-by: Sasha Levin commit 3d516e369e3a563e7da39c72b06d78c7f1b09b1e Author: Krishna Manikandan Date: Mon Jun 1 16:33:22 2020 +0530 drm/msm: add shutdown support for display platform_driver [ Upstream commit 9d5cbf5fe46e350715389d89d0c350d83289a102 ] Define shutdown callback for display drm driver, so as to disable all the CRTCS when shutdown notification is received by the driver. This change will turn off the timing engine so that no display transactions are requested while mmu translations are getting disabled during reboot sequence. Signed-off-by: Krishna Manikandan Changes in v2: - Remove NULL check from msm_pdev_shutdown (Stephen Boyd) - Change commit text to reflect when this issue was uncovered (Sai Prakash Ranjan) Signed-off-by: Rob Clark Signed-off-by: Sasha Levin commit 11519e7b9776cb27a008ccc1f3709b60c086ee3c Author: Kim Phillips Date: Tue Sep 1 16:58:53 2020 -0500 perf record/stat: Explicitly call out event modifiers in the documentation commit e48a73a312ebf19cc3d72aa74985db25c30757c1 upstream. Event modifiers are not mentioned in the perf record or perf stat manpages. Add them to orient new users more effectively by pointing them to the perf list manpage for details. Fixes: 2055fdaf8703 ("perf list: Document precise event sampling for AMD IBS") Signed-off-by: Kim Phillips Cc: Adrian Hunter Cc: Alexander Shishkin Cc: Alexey Budankov Cc: Ian Rogers Cc: Jin Yao Cc: Jiri Olsa Cc: Mark Rutland Cc: Namhyung Kim Cc: Paul Clarke Cc: Peter Zijlstra Cc: Stephane Eranian Cc: Tony Jones Cc: stable@vger.kernel.org Link: http://lore.kernel.org/lkml/20200901215853.276234-1-kim.phillips@amd.com Signed-off-by: Arnaldo Carvalho de Melo Signed-off-by: Greg Kroah-Hartman commit a083dcdcfa2568747112edf865b3e848d70835e5 Author: Marc Zyngier Date: Tue Sep 1 10:52:33 2020 +0100 HID: core: Sanitize event code and type when mapping input commit 35556bed836f8dc07ac55f69c8d17dce3e7f0e25 upstream. When calling into hid_map_usage(), the passed event code is blindly stored as is, even if it doesn't fit in the associated bitmap. This event code can come from a variety of sources, including devices masquerading as input devices, only a bit more "programmable". Instead of taking the event code at face value, check that it actually fits the corresponding bitmap, and if it doesn't: - spit out a warning so that we know which device is acting up - NULLify the bitmap pointer so that we catch unexpected uses Code paths that can make use of untrusted inputs can now check that the mapping was indeed correct and bail out if not. Cc: stable@vger.kernel.org Signed-off-by: Marc Zyngier Signed-off-by: Benjamin Tissoires Signed-off-by: Greg Kroah-Hartman commit 9e5894b7e2229e6d89319864fb08304571fd44f7 Author: Marc Zyngier Date: Sat Aug 29 12:26:01 2020 +0100 HID: core: Correctly handle ReportSize being zero commit bce1305c0ece3dc549663605e567655dd701752c upstream. It appears that a ReportSize value of zero is legal, even if a bit non-sensical. Most of the HID code seems to handle that gracefully, except when computing the total size in bytes. When fed as input to memset, this leads to some funky outcomes. Detect the corner case and correctly compute the size. Cc: stable@vger.kernel.org Signed-off-by: Marc Zyngier Signed-off-by: Benjamin Tissoires Signed-off-by: Greg Kroah-Hartman