commit e911713e40ca73142b455ccfde2d7c0b0984c008 Author: Greg Kroah-Hartman Date: Thu Nov 10 15:47:24 2022 +0100 Linux 4.14.299 Link: https://lore.kernel.org/r/20221108133328.351887714@linuxfoundation.org Tested-by: Guenter Roeck Tested-by: Jon Hunter Tested-by: Linux Kernel Functional Testing Signed-off-by: Greg Kroah-Hartman commit b23665bbd39224e15aab89df4a4b60c0ab2ad09d Author: Dokyung Song Date: Fri Oct 21 15:13:59 2022 +0900 wifi: brcmfmac: Fix potential buffer overflow in brcmf_fweh_event_worker() commit 6788ba8aed4e28e90f72d68a9d794e34eac17295 upstream. This patch fixes an intra-object buffer overflow in brcmfmac that occurs when the device provides a 'bsscfgidx' equal to or greater than the buffer size. The patch adds a check that leads to a safe failure if that is the case. This fixes CVE-2022-3628. UBSAN: array-index-out-of-bounds in drivers/net/wireless/broadcom/brcm80211/brcmfmac/fweh.c index 52 is out of range for type 'brcmf_if *[16]' CPU: 0 PID: 1898 Comm: kworker/0:2 Tainted: G O 5.14.0+ #132 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014 Workqueue: events brcmf_fweh_event_worker Call Trace: dump_stack_lvl+0x57/0x7d ubsan_epilogue+0x5/0x40 __ubsan_handle_out_of_bounds+0x69/0x80 ? memcpy+0x39/0x60 brcmf_fweh_event_worker+0xae1/0xc00 ? brcmf_fweh_call_event_handler.isra.0+0x100/0x100 ? rcu_read_lock_sched_held+0xa1/0xd0 ? rcu_read_lock_bh_held+0xb0/0xb0 ? lockdep_hardirqs_on_prepare+0x273/0x3e0 process_one_work+0x873/0x13e0 ? lock_release+0x640/0x640 ? pwq_dec_nr_in_flight+0x320/0x320 ? rwlock_bug.part.0+0x90/0x90 worker_thread+0x8b/0xd10 ? __kthread_parkme+0xd9/0x1d0 ? process_one_work+0x13e0/0x13e0 kthread+0x379/0x450 ? _raw_spin_unlock_irq+0x24/0x30 ? set_kthread_struct+0x100/0x100 ret_from_fork+0x1f/0x30 ================================================================================ general protection fault, probably for non-canonical address 0xe5601c0020023fff: 0000 [#1] SMP KASAN KASAN: maybe wild-memory-access in range [0x2b0100010011fff8-0x2b0100010011ffff] CPU: 0 PID: 1898 Comm: kworker/0:2 Tainted: G O 5.14.0+ #132 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014 Workqueue: events brcmf_fweh_event_worker RIP: 0010:brcmf_fweh_call_event_handler.isra.0+0x42/0x100 Code: 89 f5 53 48 89 fb 48 83 ec 08 e8 79 0b 38 fe 48 85 ed 74 7e e8 6f 0b 38 fe 48 89 ea 48 b8 00 00 00 00 00 fc ff df 48 c1 ea 03 <80> 3c 02 00 0f 85 8b 00 00 00 4c 8b 7d 00 44 89 e0 48 ba 00 00 00 RSP: 0018:ffffc9000259fbd8 EFLAGS: 00010207 RAX: dffffc0000000000 RBX: ffff888115d8cd50 RCX: 0000000000000000 RDX: 0560200020023fff RSI: ffffffff8304bc91 RDI: ffff888115d8cd50 RBP: 2b0100010011ffff R08: ffff888112340050 R09: ffffed1023549809 R10: ffff88811aa4c047 R11: ffffed1023549808 R12: 0000000000000045 R13: ffffc9000259fca0 R14: ffff888112340050 R15: ffff888112340000 FS: 0000000000000000(0000) GS:ffff88811aa00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000004053ccc0 CR3: 0000000112740000 CR4: 0000000000750ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: brcmf_fweh_event_worker+0x117/0xc00 ? brcmf_fweh_call_event_handler.isra.0+0x100/0x100 ? rcu_read_lock_sched_held+0xa1/0xd0 ? rcu_read_lock_bh_held+0xb0/0xb0 ? lockdep_hardirqs_on_prepare+0x273/0x3e0 process_one_work+0x873/0x13e0 ? lock_release+0x640/0x640 ? pwq_dec_nr_in_flight+0x320/0x320 ? rwlock_bug.part.0+0x90/0x90 worker_thread+0x8b/0xd10 ? __kthread_parkme+0xd9/0x1d0 ? process_one_work+0x13e0/0x13e0 kthread+0x379/0x450 ? _raw_spin_unlock_irq+0x24/0x30 ? set_kthread_struct+0x100/0x100 ret_from_fork+0x1f/0x30 Modules linked in: 88XXau(O) 88x2bu(O) ---[ end trace 41d302138f3ff55a ]--- RIP: 0010:brcmf_fweh_call_event_handler.isra.0+0x42/0x100 Code: 89 f5 53 48 89 fb 48 83 ec 08 e8 79 0b 38 fe 48 85 ed 74 7e e8 6f 0b 38 fe 48 89 ea 48 b8 00 00 00 00 00 fc ff df 48 c1 ea 03 <80> 3c 02 00 0f 85 8b 00 00 00 4c 8b 7d 00 44 89 e0 48 ba 00 00 00 RSP: 0018:ffffc9000259fbd8 EFLAGS: 00010207 RAX: dffffc0000000000 RBX: ffff888115d8cd50 RCX: 0000000000000000 RDX: 0560200020023fff RSI: ffffffff8304bc91 RDI: ffff888115d8cd50 RBP: 2b0100010011ffff R08: ffff888112340050 R09: ffffed1023549809 R10: ffff88811aa4c047 R11: ffffed1023549808 R12: 0000000000000045 R13: ffffc9000259fca0 R14: ffff888112340050 R15: ffff888112340000 FS: 0000000000000000(0000) GS:ffff88811aa00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000004053ccc0 CR3: 0000000112740000 CR4: 0000000000750ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Kernel panic - not syncing: Fatal exception Reported-by: Dokyung Song Reported-by: Jisoo Jang Reported-by: Minsuk Kang Reviewed-by: Arend van Spriel Cc: Signed-off-by: Dokyung Song Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/20221021061359.GA550858@laguna Signed-off-by: Greg Kroah-Hartman commit 8b09c0c78f0855af07755f9510adb2fda5835fe1 Author: Masahiro Yamada Date: Tue Jul 16 16:26:57 2019 -0700 linux/bits.h: make BIT(), GENMASK(), and friends available in assembly commit 95b980d62d52c4c1768ee719e8db3efe27ef52b2 upstream. BIT(), GENMASK(), etc. are useful to define register bits of hardware. However, low-level code is often written in assembly, where they are not available due to the hard-coded 1UL, 0UL. In fact, in-kernel headers such as arch/arm64/include/asm/sysreg.h use _BITUL() instead of BIT() so that the register bit macros are available in assembly. Using macros in include/uapi/linux/const.h have two reasons: [1] For use in uapi headers We should use underscore-prefixed variants for user-space. [2] For use in assembly code Since _BITUL() uses UL(1) instead of 1UL, it can be used as an alternative of BIT(). For [2], it is pretty easy to change BIT() etc. for use in assembly. This allows to replace _BUTUL() in kernel-space headers with BIT(). Link: http://lkml.kernel.org/r/20190609153941.17249-1-yamada.masahiro@socionext.com Signed-off-by: Masahiro Yamada Cc: Catalin Marinas Cc: Christian Borntraeger Cc: Heiko Carstens Cc: Vasily Gorbik Cc: Vineet Gupta Cc: Will Deacon Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Nick Desaulniers Signed-off-by: Greg Kroah-Hartman commit 6bd6be6884760fb1cb1f8672661f0e9dabdf4bc2 Author: Masahiro Yamada Date: Tue Apr 10 16:36:19 2018 -0700 linux/const.h: move UL() macro to include/linux/const.h commit 2dd8a62c647691161a2346546834262597739872 upstream. ARM, ARM64 and UniCore32 duplicate the definition of UL(): #define UL(x) _AC(x, UL) This is not actually arch-specific, so it will be useful to move it to a common header. Currently, we only have the uapi variant for linux/const.h, so I am creating include/linux/const.h. I also added _UL(), _ULL() and ULL() because _AC() is mostly used in the form either _AC(..., UL) or _AC(..., ULL). I expect they will be replaced in follow-up cleanups. The underscore-prefixed ones should be used for exported headers. Link: http://lkml.kernel.org/r/1519301715-31798-4-git-send-email-yamada.masahiro@socionext.com Signed-off-by: Masahiro Yamada Acked-by: Guan Xuetao Acked-by: Catalin Marinas Acked-by: Russell King Cc: David Howells Cc: Geert Uytterhoeven Cc: Will Deacon Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Nick Desaulniers Signed-off-by: Greg Kroah-Hartman commit 0ad721c293d2cf46777674eb3f2b1a3dc4027b6c Author: Masahiro Yamada Date: Tue Apr 10 16:36:15 2018 -0700 linux/const.h: prefix include guard of uapi/linux/const.h with _UAPI commit 2a6cc8a6c0cb44baf7df2f64e5090aaf726002c3 upstream. Patch series "linux/const.h: cleanups of macros such as UL(), _BITUL(), BIT() etc", v3. ARM, ARM64, UniCore32 define UL() as a shorthand of _AC(..., UL). More architectures may introduce it in the future. UL() is arch-agnostic, and useful. So let's move it to include/linux/const.h Currently, must be included to use UL(). It pulls in more bloats just for defining some bit macros. I posted V2 one year ago. The previous posts are: https://patchwork.kernel.org/patch/9498273/ https://patchwork.kernel.org/patch/9498275/ https://patchwork.kernel.org/patch/9498269/ https://patchwork.kernel.org/patch/9498271/ At that time, what blocked this series was a comment from David Howells: You need to be very careful doing this. Some userspace stuff depends on the guard macro names on the kernel header files. (https://patchwork.kernel.org/patch/9498275/) Looking at the code closer, I noticed this is not a problem. See the following line. https://github.com/torvalds/linux/blob/v4.16-rc2/scripts/headers_install.sh#L40 scripts/headers_install.sh rips off _UAPI prefix from guard macro names. I ran "make headers_install" and confirmed the result is what I expect. So, we can prefix the include guard of include/uapi/linux/const.h, and add a new include/linux/const.h. This patch (of 4): I am going to add include/linux/const.h for the kernel space. Add _UAPI to the include guard of include/uapi/linux/const.h to prepare for that. Please notice the guard name of the exported one will be kept as-is. So, this commit has no impact to the userspace even if some userspace stuff depends on the guard macro names. scripts/headers_install.sh processes exported headers by SED, and rips off "_UAPI" from guard macro names. #ifndef _UAPI_LINUX_CONST_H #define _UAPI_LINUX_CONST_H will be turned into #ifndef _LINUX_CONST_H #define _LINUX_CONST_H Link: http://lkml.kernel.org/r/1519301715-31798-2-git-send-email-yamada.masahiro@socionext.com Signed-off-by: Masahiro Yamada Cc: David Howells Cc: Will Deacon Cc: Guan Xuetao Cc: Geert Uytterhoeven Cc: Catalin Marinas Cc: Russell King Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds [nd: resolve trivial conflict due to b732e14e6218b being backported before this] Signed-off-by: Nick Desaulniers Signed-off-by: Greg Kroah-Hartman commit 13156b255ac7a231c12439a33290b4632f04a1d3 Author: Maxim Levitsky Date: Tue Oct 25 15:47:31 2022 +0300 KVM: x86: emulator: update the emulation mode after CR0 write commit ad8f9e69942c7db90758d9d774157e53bce94840 upstream. Update the emulation mode when handling writes to CR0, because toggling CR0.PE switches between Real and Protected Mode, and toggling CR0.PG when EFER.LME=1 switches between Long and Protected Mode. This is likely a benign bug because there is no writeback of state, other than the RIP increment, and when toggling CR0.PE, the CPU has to execute code from a very low memory address. Signed-off-by: Maxim Levitsky Message-Id: <20221025124741.228045-14-mlevitsk@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini Signed-off-by: Greg Kroah-Hartman commit e232e74a95dacf86408d12c793f5aa6c655de319 Author: Maxim Levitsky Date: Tue Oct 25 15:47:29 2022 +0300 KVM: x86: emulator: introduce emulator_recalc_and_set_mode commit d087e0f79fa0dd336a9a6b2f79ec23120f5eff73 upstream. Some instructions update the cpu execution mode, which needs to update the emulation mode. Extract this code, and make assign_eip_far use it. assign_eip_far now reads CS, instead of getting it via a parameter, which is ok, because callers always assign CS to the same value before calling this function. No functional change is intended. Signed-off-by: Maxim Levitsky Message-Id: <20221025124741.228045-12-mlevitsk@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini Signed-off-by: Greg Kroah-Hartman commit 03dce7d5a3aa87200a57db64f32b6f6dbd26bc53 Author: Maxim Levitsky Date: Tue Oct 25 15:47:28 2022 +0300 KVM: x86: emulator: em_sysexit should update ctxt->mode commit 5015bb89b58225f97df6ac44383e7e8c8662c8c9 upstream. SYSEXIT is one of the instructions that can change the processor mode, thus ctxt->mode should be updated after it. Note that this is likely a benign bug, because the only problematic mode change is from 32 bit to 64 bit which can lead to truncation of RIP, and it is not possible to do with sysexit, since sysexit running in 32 bit mode will be limited to 32 bit version. Signed-off-by: Maxim Levitsky Message-Id: <20221025124741.228045-11-mlevitsk@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini Signed-off-by: Greg Kroah-Hartman commit 838852ad7cacdee09e9d30203de02d3bad6964d1 Author: Jim Mattson Date: Thu Sep 29 15:52:00 2022 -0700 KVM: x86: Mask off reserved bits in CPUID.80000008H commit 7030d8530e533844e2f4b0e7476498afcd324634 upstream. KVM_GET_SUPPORTED_CPUID should only enumerate features that KVM actually supports. The following ranges of CPUID.80000008H are reserved and should be masked off: ECX[31:18] ECX[11:8] In addition, the PerfTscSize field at ECX[17:16] should also be zero because KVM does not set the PERFTSC bit at CPUID.80000001H.ECX[27]. Fixes: 24c82e576b78 ("KVM: Sanitize cpuid") Signed-off-by: Jim Mattson Message-Id: <20220929225203.2234702-3-jmattson@google.com> Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini Signed-off-by: Greg Kroah-Hartman commit c3bf1e95cfa7d950dc3c064d0c2e3d06b427bc63 Author: Ye Bin Date: Tue Oct 18 10:27:01 2022 +0800 ext4: fix warning in 'ext4_da_release_space' commit 1b8f787ef547230a3249bcf897221ef0cc78481b upstream. Syzkaller report issue as follows: EXT4-fs (loop0): Free/Dirty block details EXT4-fs (loop0): free_blocks=0 EXT4-fs (loop0): dirty_blocks=0 EXT4-fs (loop0): Block reservation details EXT4-fs (loop0): i_reserved_data_blocks=0 EXT4-fs warning (device loop0): ext4_da_release_space:1527: ext4_da_release_space: ino 18, to_free 1 with only 0 reserved data blocks ------------[ cut here ]------------ WARNING: CPU: 0 PID: 92 at fs/ext4/inode.c:1528 ext4_da_release_space+0x25e/0x370 fs/ext4/inode.c:1524 Modules linked in: CPU: 0 PID: 92 Comm: kworker/u4:4 Not tainted 6.0.0-syzkaller-09423-g493ffd6605b2 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/22/2022 Workqueue: writeback wb_workfn (flush-7:0) RIP: 0010:ext4_da_release_space+0x25e/0x370 fs/ext4/inode.c:1528 RSP: 0018:ffffc900015f6c90 EFLAGS: 00010296 RAX: 42215896cd52ea00 RBX: 0000000000000000 RCX: 42215896cd52ea00 RDX: 0000000000000000 RSI: 0000000080000001 RDI: 0000000000000000 RBP: 1ffff1100e907d96 R08: ffffffff816aa79d R09: fffff520002bece5 R10: fffff520002bece5 R11: 1ffff920002bece4 R12: ffff888021fd2000 R13: ffff88807483ecb0 R14: 0000000000000001 R15: ffff88807483e740 FS: 0000000000000000(0000) GS:ffff8880b9a00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00005555569ba628 CR3: 000000000c88e000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: ext4_es_remove_extent+0x1ab/0x260 fs/ext4/extents_status.c:1461 mpage_release_unused_pages+0x24d/0xef0 fs/ext4/inode.c:1589 ext4_writepages+0x12eb/0x3be0 fs/ext4/inode.c:2852 do_writepages+0x3c3/0x680 mm/page-writeback.c:2469 __writeback_single_inode+0xd1/0x670 fs/fs-writeback.c:1587 writeback_sb_inodes+0xb3b/0x18f0 fs/fs-writeback.c:1870 wb_writeback+0x41f/0x7b0 fs/fs-writeback.c:2044 wb_do_writeback fs/fs-writeback.c:2187 [inline] wb_workfn+0x3cb/0xef0 fs/fs-writeback.c:2227 process_one_work+0x877/0xdb0 kernel/workqueue.c:2289 worker_thread+0xb14/0x1330 kernel/workqueue.c:2436 kthread+0x266/0x300 kernel/kthread.c:376 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:306 Above issue may happens as follows: ext4_da_write_begin ext4_create_inline_data ext4_clear_inode_flag(inode, EXT4_INODE_EXTENTS); ext4_set_inode_flag(inode, EXT4_INODE_INLINE_DATA); __ext4_ioctl ext4_ext_migrate -> will lead to eh->eh_entries not zero, and set extent flag ext4_da_write_begin ext4_da_convert_inline_data_to_extent ext4_da_write_inline_data_begin ext4_da_map_blocks ext4_insert_delayed_block if (!ext4_es_scan_clu(inode, &ext4_es_is_delonly, lblk)) if (!ext4_es_scan_clu(inode, &ext4_es_is_mapped, lblk)) ext4_clu_mapped(inode, EXT4_B2C(sbi, lblk)); -> will return 1 allocated = true; ext4_es_insert_delayed_block(inode, lblk, allocated); ext4_writepages mpage_map_and_submit_extent(handle, &mpd, &give_up_on_write); -> return -ENOSPC mpage_release_unused_pages(&mpd, give_up_on_write); -> give_up_on_write == 1 ext4_es_remove_extent ext4_da_release_space(inode, reserved); if (unlikely(to_free > ei->i_reserved_data_blocks)) -> to_free == 1 but ei->i_reserved_data_blocks == 0 -> then trigger warning as above To solve above issue, forbid inode do migrate which has inline data. Cc: stable@kernel.org Reported-by: syzbot+c740bb18df70ad00952e@syzkaller.appspotmail.com Signed-off-by: Ye Bin Reviewed-by: Jan Kara Link: https://lore.kernel.org/r/20221018022701.683489-1-yebin10@huawei.com Signed-off-by: Theodore Ts'o Signed-off-by: Greg Kroah-Hartman commit a9d9183d137c7a3f7c3cbfbfe54870cfeebfcaf9 Author: Helge Deller Date: Thu Oct 27 09:12:05 2022 +0200 parisc: Export iosapic_serial_irq() symbol for serial port driver commit a0c9f1f2e53b8eb2ae43987a30e547ba56b4fa18 upstream. The parisc serial port driver needs this symbol when it's compiled as module. Signed-off-by: Helge Deller Reported-by: kernel test robot Cc: Signed-off-by: Greg Kroah-Hartman commit 72cdf34aa51d371736da34a3339665be0bf408b3 Author: Helge Deller Date: Fri Oct 21 07:44:49 2022 +0200 parisc: Make 8250_gsc driver dependend on CONFIG_PARISC commit e8a18e3f00f3ee8d07c17ab1ea3ad4df4a3b6fe0 upstream. Although the name of the driver 8250_gsc.c suggests that it handles only serial ports on the GSC bus, it does handle serial ports listed in the parisc machine inventory as well, e.g. the serial ports in a C8000 PCI-only workstation. Change the dependency to CONFIG_PARISC, so that the driver gets included in the kernel even if CONFIG_GSC isn't set. Reported-by: Mikulas Patocka Cc: Signed-off-by: Helge Deller Signed-off-by: Greg Kroah-Hartman commit 700485f70e50d86b30ee1e3a6f1167d0c4881747 Author: Ard Biesheuvel Date: Thu Oct 20 10:39:08 2022 +0200 efi: random: reduce seed size to 32 bytes commit 161a438d730dade2ba2b1bf8785f0759aba4ca5f upstream. We no longer need at least 64 bytes of random seed to permit the early crng init to complete. The RNG is now based on Blake2s, so reduce the EFI seed size to the Blake2s hash size, which is sufficient for our purposes. While at it, drop the READ_ONCE(), which was supposed to prevent size from being evaluated after seed was unmapped. However, this cannot actually happen, so READ_ONCE() is unnecessary here. Cc: # v4.14+ Signed-off-by: Ard Biesheuvel Reviewed-by: Jason A. Donenfeld Acked-by: Ilias Apalodimas Signed-off-by: Greg Kroah-Hartman commit ad90643306e8a3940265b59f81b9e2146ff1d82e Author: John Veness Date: Fri Jun 24 15:07:57 2022 +0100 ALSA: usb-audio: Add quirks for MacroSilicon MS2100/MS2106 devices commit 6e2c9105e0b743c92a157389d40f00b81bdd09fe upstream. Treat the claimed 96kHz 1ch in the descriptors as 48kHz 2ch, so that the audio stream doesn't sound mono. Also fix initial stream alignment, so that left and right channels are in the correct order. Signed-off-by: John Veness Link: https://lore.kernel.org/r/20220624140757.28758-1-john-linux@pelago.org.uk Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman commit 6bb00eb21c0fbf18e5d3538c9ff0cf63fd0ace85 Author: Gaosheng Cui Date: Tue Oct 25 21:33:57 2022 +0800 capabilities: fix potential memleak on error path from vfs_getxattr_alloc() commit 8cf0a1bc12870d148ae830a4ba88cfdf0e879cee upstream. In cap_inode_getsecurity(), we will use vfs_getxattr_alloc() to complete the memory allocation of tmpbuf, if we have completed the memory allocation of tmpbuf, but failed to call handler->get(...), there will be a memleak in below logic: |-- ret = (int)vfs_getxattr_alloc(mnt_userns, ...) | /* ^^^ alloc for tmpbuf */ |-- value = krealloc(*xattr_value, error + 1, flags) | /* ^^^ alloc memory */ |-- error = handler->get(handler, ...) | /* error! */ |-- *xattr_value = value | /* xattr_value is &tmpbuf (memory leak!) */ So we will try to free(tmpbuf) after vfs_getxattr_alloc() fails to fix it. Cc: stable@vger.kernel.org Fixes: 8db6c34f1dbc ("Introduce v3 namespaced file capabilities") Signed-off-by: Gaosheng Cui Acked-by: Serge Hallyn [PM: subject line and backtrace tweaks] Signed-off-by: Paul Moore Signed-off-by: Greg Kroah-Hartman commit 8783066210ded324f3d8f29da23bc90e38823da8 Author: Kuniyuki Iwashima Date: Wed Jul 13 10:52:07 2022 -0700 tcp/udp: Make early_demux back namespacified. commit 11052589cf5c0bab3b4884d423d5f60c38fcf25d upstream. Commit e21145a9871a ("ipv4: namespacify ip_early_demux sysctl knob") made it possible to enable/disable early_demux on a per-netns basis. Then, we introduced two knobs, tcp_early_demux and udp_early_demux, to switch it for TCP/UDP in commit dddb64bcb346 ("net: Add sysctl to toggle early demux for tcp and udp"). However, the .proc_handler() was wrong and actually disabled us from changing the behaviour in each netns. We can execute early_demux if net.ipv4.ip_early_demux is on and each proto .early_demux() handler is not NULL. When we toggle (tcp|udp)_early_demux, the change itself is saved in each netns variable, but the .early_demux() handler is a global variable, so the handler is switched based on the init_net's sysctl variable. Thus, netns (tcp|udp)_early_demux knobs have nothing to do with the logic. Whether we CAN execute proto .early_demux() is always decided by init_net's sysctl knob, and whether we DO it or not is by each netns ip_early_demux knob. This patch namespacifies (tcp|udp)_early_demux again. For now, the users of the .early_demux() handler are TCP and UDP only, and they are called directly to avoid retpoline. So, we can remove the .early_demux() handler from inet6?_protos and need not dereference them in ip6?_rcv_finish_core(). If another proto needs .early_demux(), we can restore it at that time. Fixes: dddb64bcb346 ("net: Add sysctl to toggle early demux for tcp and udp") Signed-off-by: Kuniyuki Iwashima Link: https://lore.kernel.org/r/20220713175207.7727-1-kuniyu@amazon.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman commit 7907466fb1fb64b5233d8268513d3b4696f6a6e8 Author: David Sterba Date: Tue Oct 18 16:05:52 2022 +0200 btrfs: fix type of parameter generation in btrfs_get_dentry commit 2398091f9c2c8e0040f4f9928666787a3e8108a7 upstream. The type of parameter generation has been u32 since the beginning, however all callers pass a u64 generation, so unify the types to prevent potential loss. CC: stable@vger.kernel.org # 4.9+ Reviewed-by: Josef Bacik Signed-off-by: David Sterba Signed-off-by: Greg Kroah-Hartman commit 79379ab3aeb351b24416ba5cf8e23be4046c2711 Author: Yu Kuai Date: Fri May 13 10:35:06 2022 +0800 block, bfq: protect 'bfqd->queued' by 'bfqd->lock' commit 181490d5321806e537dc5386db5ea640b826bf78 upstream. If bfq_schedule_dispatch() is called from bfq_idle_slice_timer_body(), then 'bfqd->queued' is read without holding 'bfqd->lock'. This is wrong since it can be wrote concurrently. Fix the problem by holding 'bfqd->lock' in such case. Signed-off-by: Yu Kuai Reviewed-by: Jan Kara Reviewed-by: Chaitanya Kulkarni Link: https://lore.kernel.org/r/20220513023507.2625717-2-yukuai3@huawei.com Signed-off-by: Jens Axboe Cc: Khazhy Kumykov Signed-off-by: Greg Kroah-Hartman commit 999d99c8de09537bd4f4a4a7db2be6b55c6ed817 Author: Luiz Augusto von Dentz Date: Mon Oct 31 16:10:52 2022 -0700 Bluetooth: L2CAP: Fix attempting to access uninitialized memory commit b1a2cd50c0357f243b7435a732b4e62ba3157a2e upstream. On l2cap_parse_conf_req the variable efs is only initialized if remote_efs has been set. CVE: CVE-2022-42895 CC: stable@vger.kernel.org Reported-by: Tamás Koczka Signed-off-by: Luiz Augusto von Dentz Reviewed-by: Tedd Ho-Jeong An Signed-off-by: Greg Kroah-Hartman commit eb0393cdccfcd56dd35c5965e1f416d6d19e143e Author: Martin Tůma Date: Tue Oct 18 16:03:37 2022 +0200 i2c: xiic: Add platform module alias [ Upstream commit b8caf0a0e04583fb71e21495bef84509182227ea ] The missing "platform" alias is required for the mgb4 v4l2 driver to load the i2c controller driver when probing the HW. Signed-off-by: Martin Tůma Acked-by: Michal Simek Signed-off-by: Wolfram Sang Signed-off-by: Sasha Levin commit dbf155857dbe94664aa50ef81432b3aac4e61722 Author: Hans Verkuil Date: Tue Aug 30 07:59:24 2022 +0200 media: dvb-frontends/drxk: initialize err to 0 [ Upstream commit 20694e96ca089ce6693c2348f8f628ee621e4e74 ] Fix a compiler warning: drivers/media/dvb-frontends/drxk_hard.c: In function 'drxk_read_ucblocks': drivers/media/dvb-frontends/drxk_hard.c:6673:21: warning: 'err' may be used uninitialized [-Wmaybe-uninitialized] 6673 | *ucblocks = (u32) err; | ^~~~~~~~~ drivers/media/dvb-frontends/drxk_hard.c:6663:13: note: 'err' was declared here 6663 | u16 err; | ^~~ Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Sasha Levin commit fc0f76dd5f116fa9291327024dda392f8b4e849c Author: Hans Verkuil Date: Wed Aug 24 09:02:42 2022 +0200 media: s5p_cec: limit msg.len to CEC_MAX_MSG_SIZE [ Upstream commit 93f65ce036863893c164ca410938e0968964b26c ] I expect that the hardware will have limited this to 16, but just in case it hasn't, check for this corner case. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Sasha Levin commit 0d38b4ca6679e72860ff8730e79bb99d0e9fa3b0 Author: Chen Zhongjin Date: Tue Nov 1 20:15:52 2022 +0800 net, neigh: Fix null-ptr-deref in neigh_table_clear() [ Upstream commit f8017317cb0b279b8ab98b0f3901a2e0ac880dad ] When IPv6 module gets initialized but hits an error in the middle, kenel panic with: KASAN: null-ptr-deref in range [0x0000000000000598-0x000000000000059f] CPU: 1 PID: 361 Comm: insmod Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) RIP: 0010:__neigh_ifdown.isra.0+0x24b/0x370 RSP: 0018:ffff888012677908 EFLAGS: 00000202 ... Call Trace: neigh_table_clear+0x94/0x2d0 ndisc_cleanup+0x27/0x40 [ipv6] inet6_init+0x21c/0x2cb [ipv6] do_one_initcall+0xd3/0x4d0 do_init_module+0x1ae/0x670 ... Kernel panic - not syncing: Fatal exception When ipv6 initialization fails, it will try to cleanup and calls: neigh_table_clear() neigh_ifdown(tbl, NULL) pneigh_queue_purge(&tbl->proxy_queue, dev_net(dev == NULL)) # dev_net(NULL) triggers null-ptr-deref. Fix it by passing NULL to pneigh_queue_purge() in neigh_ifdown() if dev is NULL, to make kernel not panic immediately. Fixes: 66ba215cb513 ("neigh: fix possible DoS due to net iface start/stop loop") Signed-off-by: Chen Zhongjin Reviewed-by: Eric Dumazet Reviewed-by: Denis V. Lunev Link: https://lore.kernel.org/r/20221101121552.21890-1-chenzhongjin@huawei.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 7006176a3c863e3e353ce1b8a349ef5bb1b9320e Author: Gaosheng Cui Date: Mon Oct 31 21:26:45 2022 +0800 net: mdio: fix undefined behavior in bit shift for __mdiobus_register [ Upstream commit 40e4eb324c59e11fcb927aa46742d28aba6ecb8a ] Shifting signed 32-bit value by 31 bits is undefined, so changing significant bit to unsigned. The UBSAN warning calltrace like below: UBSAN: shift-out-of-bounds in drivers/net/phy/mdio_bus.c:586:27 left shift of 1 by 31 places cannot be represented in type 'int' Call Trace: dump_stack_lvl+0x7d/0xa5 dump_stack+0x15/0x1b ubsan_epilogue+0xe/0x4e __ubsan_handle_shift_out_of_bounds+0x1e7/0x20c __mdiobus_register+0x49d/0x4e0 fixed_mdio_bus_init+0xd8/0x12d do_one_initcall+0x76/0x430 kernel_init_freeable+0x3b3/0x422 kernel_init+0x24/0x1e0 ret_from_fork+0x1f/0x30 Fixes: 4fd5f812c23c ("phylib: allow incremental scanning of an mii bus") Signed-off-by: Gaosheng Cui Reviewed-by: Andrew Lunn Link: https://lore.kernel.org/r/20221031132645.168421-1-cuigaosheng1@huawei.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin commit 17c6164854f8bb80bf76f32b2c2f199c16b53703 Author: Zhengchao Shao Date: Mon Oct 17 15:58:13 2022 +0800 Bluetooth: L2CAP: fix use-after-free in l2cap_conn_del() [ Upstream commit 0d0e2d032811280b927650ff3c15fe5020e82533 ] When l2cap_recv_frame() is invoked to receive data, and the cid is L2CAP_CID_A2MP, if the channel does not exist, it will create a channel. However, after a channel is created, the hold operation of the channel is not performed. In this case, the value of channel reference counting is 1. As a result, after hci_error_reset() is triggered, l2cap_conn_del() invokes the close hook function of A2MP to release the channel. Then l2cap_chan_unlock(chan) will trigger UAF issue. The process is as follows: Receive data: l2cap_data_channel() a2mp_channel_create() --->channel ref is 2 l2cap_chan_put() --->channel ref is 1 Triger event: hci_error_reset() hci_dev_do_close() ... l2cap_disconn_cfm() l2cap_conn_del() l2cap_chan_hold() --->channel ref is 2 l2cap_chan_del() --->channel ref is 1 a2mp_chan_close_cb() --->channel ref is 0, release channel l2cap_chan_unlock() --->UAF of channel The detailed Call Trace is as follows: BUG: KASAN: use-after-free in __mutex_unlock_slowpath+0xa6/0x5e0 Read of size 8 at addr ffff8880160664b8 by task kworker/u11:1/7593 Workqueue: hci0 hci_error_reset Call Trace: dump_stack_lvl+0xcd/0x134 print_report.cold+0x2ba/0x719 kasan_report+0xb1/0x1e0 kasan_check_range+0x140/0x190 __mutex_unlock_slowpath+0xa6/0x5e0 l2cap_conn_del+0x404/0x7b0 l2cap_disconn_cfm+0x8c/0xc0 hci_conn_hash_flush+0x11f/0x260 hci_dev_close_sync+0x5f5/0x11f0 hci_dev_do_close+0x2d/0x70 hci_error_reset+0x9e/0x140 process_one_work+0x98a/0x1620 worker_thread+0x665/0x1080 kthread+0x2e4/0x3a0 ret_from_fork+0x1f/0x30 Allocated by task 7593: kasan_save_stack+0x1e/0x40 __kasan_kmalloc+0xa9/0xd0 l2cap_chan_create+0x40/0x930 amp_mgr_create+0x96/0x990 a2mp_channel_create+0x7d/0x150 l2cap_recv_frame+0x51b8/0x9a70 l2cap_recv_acldata+0xaa3/0xc00 hci_rx_work+0x702/0x1220 process_one_work+0x98a/0x1620 worker_thread+0x665/0x1080 kthread+0x2e4/0x3a0 ret_from_fork+0x1f/0x30 Freed by task 7593: kasan_save_stack+0x1e/0x40 kasan_set_track+0x21/0x30 kasan_set_free_info+0x20/0x30 ____kasan_slab_free+0x167/0x1c0 slab_free_freelist_hook+0x89/0x1c0 kfree+0xe2/0x580 l2cap_chan_put+0x22a/0x2d0 l2cap_conn_del+0x3fc/0x7b0 l2cap_disconn_cfm+0x8c/0xc0 hci_conn_hash_flush+0x11f/0x260 hci_dev_close_sync+0x5f5/0x11f0 hci_dev_do_close+0x2d/0x70 hci_error_reset+0x9e/0x140 process_one_work+0x98a/0x1620 worker_thread+0x665/0x1080 kthread+0x2e4/0x3a0 ret_from_fork+0x1f/0x30 Last potentially related work creation: kasan_save_stack+0x1e/0x40 __kasan_record_aux_stack+0xbe/0xd0 call_rcu+0x99/0x740 netlink_release+0xe6a/0x1cf0 __sock_release+0xcd/0x280 sock_close+0x18/0x20 __fput+0x27c/0xa90 task_work_run+0xdd/0x1a0 exit_to_user_mode_prepare+0x23c/0x250 syscall_exit_to_user_mode+0x19/0x50 do_syscall_64+0x42/0x80 entry_SYSCALL_64_after_hwframe+0x63/0xcd Second to last potentially related work creation: kasan_save_stack+0x1e/0x40 __kasan_record_aux_stack+0xbe/0xd0 call_rcu+0x99/0x740 netlink_release+0xe6a/0x1cf0 __sock_release+0xcd/0x280 sock_close+0x18/0x20 __fput+0x27c/0xa90 task_work_run+0xdd/0x1a0 exit_to_user_mode_prepare+0x23c/0x250 syscall_exit_to_user_mode+0x19/0x50 do_syscall_64+0x42/0x80 entry_SYSCALL_64_after_hwframe+0x63/0xcd Fixes: d0be8347c623 ("Bluetooth: L2CAP: Fix use-after-free caused by l2cap_chan_put") Signed-off-by: Zhengchao Shao Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Sasha Levin commit 03af22e23b96fb7ef75fb7885407ef457e8b403d Author: Maxim Mikityanskiy Date: Wed Oct 5 00:27:18 2022 +0300 Bluetooth: L2CAP: Fix use-after-free caused by l2cap_reassemble_sdu [ Upstream commit 3aff8aaca4e36dc8b17eaa011684881a80238966 ] Fix the race condition between the following two flows that run in parallel: 1. l2cap_reassemble_sdu -> chan->ops->recv (l2cap_sock_recv_cb) -> __sock_queue_rcv_skb. 2. bt_sock_recvmsg -> skb_recv_datagram, skb_free_datagram. An SKB can be queued by the first flow and immediately dequeued and freed by the second flow, therefore the callers of l2cap_reassemble_sdu can't use the SKB after that function returns. However, some places continue accessing struct l2cap_ctrl that resides in the SKB's CB for a short time after l2cap_reassemble_sdu returns, leading to a use-after-free condition (the stack trace is below, line numbers for kernel 5.19.8). Fix it by keeping a local copy of struct l2cap_ctrl. BUG: KASAN: use-after-free in l2cap_rx_state_recv (net/bluetooth/l2cap_core.c:6906) bluetooth Read of size 1 at addr ffff88812025f2f0 by task kworker/u17:3/43169 Workqueue: hci0 hci_rx_work [bluetooth] Call Trace: dump_stack_lvl (lib/dump_stack.c:107 (discriminator 4)) print_report.cold (mm/kasan/report.c:314 mm/kasan/report.c:429) ? l2cap_rx_state_recv (net/bluetooth/l2cap_core.c:6906) bluetooth kasan_report (mm/kasan/report.c:162 mm/kasan/report.c:493) ? l2cap_rx_state_recv (net/bluetooth/l2cap_core.c:6906) bluetooth l2cap_rx_state_recv (net/bluetooth/l2cap_core.c:6906) bluetooth l2cap_rx (net/bluetooth/l2cap_core.c:7236 net/bluetooth/l2cap_core.c:7271) bluetooth ret_from_fork (arch/x86/entry/entry_64.S:306) Allocated by task 43169: kasan_save_stack (mm/kasan/common.c:39) __kasan_slab_alloc (mm/kasan/common.c:45 mm/kasan/common.c:436 mm/kasan/common.c:469) kmem_cache_alloc_node (mm/slab.h:750 mm/slub.c:3243 mm/slub.c:3293) __alloc_skb (net/core/skbuff.c:414) l2cap_recv_frag (./include/net/bluetooth/bluetooth.h:425 net/bluetooth/l2cap_core.c:8329) bluetooth l2cap_recv_acldata (net/bluetooth/l2cap_core.c:8442) bluetooth hci_rx_work (net/bluetooth/hci_core.c:3642 net/bluetooth/hci_core.c:3832) bluetooth process_one_work (kernel/workqueue.c:2289) worker_thread (./include/linux/list.h:292 kernel/workqueue.c:2437) kthread (kernel/kthread.c:376) ret_from_fork (arch/x86/entry/entry_64.S:306) Freed by task 27920: kasan_save_stack (mm/kasan/common.c:39) kasan_set_track (mm/kasan/common.c:45) kasan_set_free_info (mm/kasan/generic.c:372) ____kasan_slab_free (mm/kasan/common.c:368 mm/kasan/common.c:328) slab_free_freelist_hook (mm/slub.c:1780) kmem_cache_free (mm/slub.c:3536 mm/slub.c:3553) skb_free_datagram (./include/net/sock.h:1578 ./include/net/sock.h:1639 net/core/datagram.c:323) bt_sock_recvmsg (net/bluetooth/af_bluetooth.c:295) bluetooth l2cap_sock_recvmsg (net/bluetooth/l2cap_sock.c:1212) bluetooth sock_read_iter (net/socket.c:1087) new_sync_read (./include/linux/fs.h:2052 fs/read_write.c:401) vfs_read (fs/read_write.c:482) ksys_read (fs/read_write.c:620) do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:120) Link: https://lore.kernel.org/linux-bluetooth/CAKErNvoqga1WcmoR3-0875esY6TVWFQDandbVZncSiuGPBQXLA@mail.gmail.com/T/#u Fixes: d2a7ac5d5d3a ("Bluetooth: Add the ERTM receive state machine") Fixes: 4b51dae96731 ("Bluetooth: Add streaming mode receive and incoming packet classifier") Signed-off-by: Maxim Mikityanskiy Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Sasha Levin commit 3f58283d83a588ff5da62fc150de19e798ed2ec2 Author: Filipe Manana Date: Tue Nov 1 16:15:39 2022 +0000 btrfs: fix ulist leaks in error paths of qgroup self tests [ Upstream commit d37de92b38932d40e4a251e876cc388f9aee5f42 ] In the test_no_shared_qgroup() and test_multiple_refs() qgroup self tests, if we fail to add the tree ref, remove the extent item or remove the extent ref, we are returning from the test function without freeing the "old_roots" ulist that was allocated by the previous calls to btrfs_find_all_roots(). Fix that by calling ulist_free() before returning. Fixes: 442244c96332 ("btrfs: qgroup: Switch self test to extent-oriented qgroup mechanism.") Signed-off-by: Filipe Manana Signed-off-by: David Sterba Signed-off-by: Sasha Levin commit b1dc9019bb5f89abae85645de1a2dd4830c1f8e9 Author: Filipe Manana Date: Tue Nov 1 16:15:37 2022 +0000 btrfs: fix inode list leak during backref walking at resolve_indirect_refs() [ Upstream commit 5614dc3a47e3310fbc77ea3b67eaadd1c6417bf1 ] During backref walking, at resolve_indirect_refs(), if we get an error we jump to the 'out' label and call ulist_free() on the 'parents' ulist, which frees all the elements in the ulist - however that does not free any inode lists that may be attached to elements, through the 'aux' field of a ulist node, so we end up leaking lists if we have any attached to the unodes. Fix this by calling free_leaf_list() instead of ulist_free() when we exit from resolve_indirect_refs(). The static function free_leaf_list() is moved up for this to be possible and it's slightly simplified by removing unnecessary code. Fixes: 3301958b7c1d ("Btrfs: add inodes before dropping the extent lock in find_all_leafs") Signed-off-by: Filipe Manana Signed-off-by: David Sterba Signed-off-by: Sasha Levin commit 375facf8a2d13da559ee02e637311bd3c3f9e906 Author: Yang Yingliang Date: Mon Oct 31 20:13:41 2022 +0800 isdn: mISDN: netjet: fix wrong check of device registration [ Upstream commit bf00f5426074249058a106a6edbb89e4b25a4d79 ] The class is set in mISDN_register_device(), but if device_add() returns error, it will lead to delete a device without added, fix this by using device_is_registered() to check if the device is registered. Fixes: a900845e5661 ("mISDN: Add support for Traverse Technologies NETJet PCI cards") Signed-off-by: Yang Yingliang Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit 080aabfb29b2ee9cbb8894a1d039651943d3773e Author: Yang Yingliang Date: Mon Oct 31 20:13:40 2022 +0800 mISDN: fix possible memory leak in mISDN_register_device() [ Upstream commit e7d1d4d9ac0dfa40be4c2c8abd0731659869b297 ] Afer commit 1fa5ae857bb1 ("driver core: get rid of struct device's bus_id string array"), the name of device is allocated dynamically, add put_device() to give up the reference, so that the name can be freed in kobject_cleanup() when the refcount is 0. Set device class before put_device() to avoid null release() function WARN message in device_release(). Fixes: 1fa5ae857bb1 ("driver core: get rid of struct device's bus_id string array") Signed-off-by: Yang Yingliang Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit bbc03d74e641e824754443b908454ca9e203773e Author: Zhang Qilong Date: Sat Oct 29 00:10:49 2022 +0800 rose: Fix NULL pointer dereference in rose_send_frame() [ Upstream commit e97c089d7a49f67027395ddf70bf327eeac2611e ] The syzkaller reported an issue: KASAN: null-ptr-deref in range [0x0000000000000380-0x0000000000000387] CPU: 0 PID: 4069 Comm: kworker/0:15 Not tainted 6.0.0-syzkaller-02734-g0326074ff465 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/22/2022 Workqueue: rcu_gp srcu_invoke_callbacks RIP: 0010:rose_send_frame+0x1dd/0x2f0 net/rose/rose_link.c:101 Call Trace: rose_transmit_clear_request+0x1d5/0x290 net/rose/rose_link.c:255 rose_rx_call_request+0x4c0/0x1bc0 net/rose/af_rose.c:1009 rose_loopback_timer+0x19e/0x590 net/rose/rose_loopback.c:111 call_timer_fn+0x1a0/0x6b0 kernel/time/timer.c:1474 expire_timers kernel/time/timer.c:1519 [inline] __run_timers.part.0+0x674/0xa80 kernel/time/timer.c:1790 __run_timers kernel/time/timer.c:1768 [inline] run_timer_softirq+0xb3/0x1d0 kernel/time/timer.c:1803 __do_softirq+0x1d0/0x9c8 kernel/softirq.c:571 [...] It triggers NULL pointer dereference when 'neigh->dev->dev_addr' is called in the rose_send_frame(). It's the first occurrence of the `neigh` is in rose_loopback_timer() as `rose_loopback_neigh', and the 'dev' in 'rose_loopback_neigh' is initialized sa nullptr. It had been fixed by commit 3b3fd068c56e3fbea30090859216a368398e39bf ("rose: Fix Null pointer dereference in rose_send_frame()") ever. But it's introduced by commit 3c53cd65dece47dd1f9d3a809f32e59d1d87b2b8 ("rose: check NULL rose_loopback_neigh->loopback") again. We fix it by add NULL check in rose_transmit_clear_request(). When the 'dev' in 'neigh' is NULL, we don't reply the request and just clear it. syzkaller don't provide repro, and I provide a syz repro like: r0 = syz_init_net_socket$bt_sco(0x1f, 0x5, 0x2) ioctl$sock_inet_SIOCSIFFLAGS(r0, 0x8914, &(0x7f0000000180)={'rose0\x00', 0x201}) r1 = syz_init_net_socket$rose(0xb, 0x5, 0x0) bind$rose(r1, &(0x7f00000000c0)=@full={0xb, @dev, @null, 0x0, [@null, @null, @netrom, @netrom, @default, @null]}, 0x40) connect$rose(r1, &(0x7f0000000240)=@short={0xb, @dev={0xbb, 0xbb, 0xbb, 0x1, 0x0}, @remote={0xcc, 0xcc, 0xcc, 0xcc, 0xcc, 0xcc, 0x1}, 0x1, @netrom={0xbb, 0xbb, 0xbb, 0xbb, 0xbb, 0x0, 0x0}}, 0x1c) Fixes: 3c53cd65dece ("rose: check NULL rose_loopback_neigh->loopback") Signed-off-by: Zhang Qilong Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit b48ac3744c55249bd69c96f9842ed9a8d5cba597 Author: Jason A. Donenfeld Date: Wed Oct 26 14:32:16 2022 +0200 ipvs: use explicitly signed chars [ Upstream commit 5c26159c97b324dc5174a5713eafb8c855cf8106 ] The `char` type with no explicit sign is sometimes signed and sometimes unsigned. This code will break on platforms such as arm, where char is unsigned. So mark it here as explicitly signed, so that the todrop_counter decrement and subsequent comparison is correct. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Jason A. Donenfeld Acked-by: Julian Anastasov Signed-off-by: Pablo Neira Ayuso Signed-off-by: Sasha Levin commit a238cdcf2bdc72207c74375fc8be13ee549ca9db Author: Dan Carpenter Date: Fri Oct 28 18:05:00 2022 +0300 net: sched: Fix use after free in red_enqueue() [ Upstream commit 8bdc2acd420c6f3dd1f1c78750ec989f02a1e2b9 ] We can't use "skb" again after passing it to qdisc_enqueue(). This is basically identical to commit 2f09707d0c97 ("sch_sfb: Also store skb len before calling child enqueue"). Fixes: d7f4f332f082 ("sch_red: update backlog as well") Signed-off-by: Dan Carpenter Reviewed-by: Eric Dumazet Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit e7cc20ec80b7bf1dbad736d0a62aaa2e7adc78c0 Author: Sergey Shtylyov Date: Sat Oct 29 00:07:06 2022 +0300 ata: pata_legacy: fix pdc20230_set_piomode() [ Upstream commit 171a93182eccd6e6835d2c86b40787f9f832efaa ] Clang gives a warning when compiling pata_legacy.c with 'make W=1' about the 'rt' local variable in pdc20230_set_piomode() being set but unused. Quite obviously, there is an outb() call missing to write back the updated variable. Moreover, checking the docs by Petr Soucek revealed that bitwise AND should have been done with a negated timing mask and the master/slave timing masks were swapped while updating... Fixes: 669a5db411d8 ("[libata] Add a bunch of PATA drivers.") Reported-by: Damien Le Moal Signed-off-by: Sergey Shtylyov Signed-off-by: Damien Le Moal Signed-off-by: Sasha Levin commit ea6237229ea0ebed3d32ce412c9cd973ab9b5a45 Author: Zhang Changzhong Date: Fri Oct 28 10:09:11 2022 +0800 net: fec: fix improper use of NETDEV_TX_BUSY [ Upstream commit 06a4df5863f73af193a4ff7abf7cb04058584f06 ] The ndo_start_xmit() method must not free skb when returning NETDEV_TX_BUSY, since caller is going to requeue freed skb. Fix it by returning NETDEV_TX_OK in case of dma_map_single() fails. Fixes: 79f339125ea3 ("net: fec: Add software TSO support") Signed-off-by: Zhang Changzhong Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit 825656ae61e73ddc05f585e6258d284c87064b10 Author: Shang XiaoJing Date: Thu Oct 27 22:03:32 2022 +0800 nfc: nfcmrvl: Fix potential memory leak in nfcmrvl_i2c_nci_send() [ Upstream commit 93d904a734a74c54d945a9884b4962977f1176cd ] nfcmrvl_i2c_nci_send() will be called by nfcmrvl_nci_send(), and skb should be freed in nfcmrvl_i2c_nci_send(). However, nfcmrvl_nci_send() will only free skb when i2c_master_send() return >=0, which means skb will memleak when i2c_master_send() failed. Free skb no matter whether i2c_master_send() succeeds. Fixes: b5b3e23e4cac ("NFC: nfcmrvl: add i2c driver") Signed-off-by: Shang XiaoJing Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit 1938b290d4a75186c5107e311bc7e87532c8b7fa Author: Shang XiaoJing Date: Thu Oct 27 22:03:31 2022 +0800 nfc: s3fwrn5: Fix potential memory leak in s3fwrn5_nci_send() [ Upstream commit 3a146b7e3099dc7cf3114f627d9b79291e2d2203 ] s3fwrn5_nci_send() will call s3fwrn5_i2c_write() or s3fwrn82_uart_write(), and free the skb if write() failed. However, even if the write() run succeeds, the skb will not be freed in write(). As the result, the skb will memleak. s3fwrn5_nci_send() should also free the skb when write() succeeds. Fixes: c04c674fadeb ("nfc: s3fwrn5: Add driver for Samsung S3FWRN5 NFC Chip") Signed-off-by: Shang XiaoJing Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit 935b4beb724946a37cebf97191592d4879d3a3a3 Author: Chen Zhongjin Date: Wed Oct 26 10:03:21 2022 +0800 net: dsa: Fix possible memory leaks in dsa_loop_init() [ Upstream commit 633efc8b3dc96f56f5a57f2a49764853a2fa3f50 ] kmemleak reported memory leaks in dsa_loop_init(): kmemleak: 12 new suspected memory leaks unreferenced object 0xffff8880138ce000 (size 2048): comm "modprobe", pid 390, jiffies 4295040478 (age 238.976s) backtrace: [<000000006a94f1d5>] kmalloc_trace+0x26/0x60 [<00000000a9c44622>] phy_device_create+0x5d/0x970 [<00000000d0ee2afc>] get_phy_device+0xf3/0x2b0 [<00000000dca0c71f>] __fixed_phy_register.part.0+0x92/0x4e0 [<000000008a834798>] fixed_phy_register+0x84/0xb0 [<0000000055223fcb>] dsa_loop_init+0xa9/0x116 [dsa_loop] ... There are two reasons for memleak in dsa_loop_init(). First, fixed_phy_register() create and register phy_device: fixed_phy_register() get_phy_device() phy_device_create() # freed by phy_device_free() phy_device_register() # freed by phy_device_remove() But fixed_phy_unregister() only calls phy_device_remove(). So the memory allocated in phy_device_create() is leaked. Second, when mdio_driver_register() fail in dsa_loop_init(), it just returns and there is no cleanup for phydevs. Fix the problems by catching the error of mdio_driver_register() in dsa_loop_init(), then calling both fixed_phy_unregister() and phy_device_free() to release phydevs. Also add a function for phydevs cleanup to avoid duplacate. Fixes: 98cd1552ea27 ("net: dsa: Mock-up driver") Signed-off-by: Chen Zhongjin Signed-off-by: David S. Miller Signed-off-by: Sasha Levin commit aae35a0c8a775fa4afa6a4e7dab3f936f1f89bbb Author: Zhang Xiaoxu Date: Thu Oct 20 11:20:54 2022 +0800 nfs4: Fix kmemleak when allocate slot failed [ Upstream commit 7e8436728e22181c3f12a5dbabd35ed3a8b8c593 ] If one of the slot allocate failed, should cleanup all the other allocated slots, otherwise, the allocated slots will leak: unreferenced object 0xffff8881115aa100 (size 64): comm ""mount.nfs"", pid 679, jiffies 4294744957 (age 115.037s) hex dump (first 32 bytes): 00 cc 19 73 81 88 ff ff 00 a0 5a 11 81 88 ff ff ...s......Z..... 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<000000007a4c434a>] nfs4_find_or_create_slot+0x8e/0x130 [<000000005472a39c>] nfs4_realloc_slot_table+0x23f/0x270 [<00000000cd8ca0eb>] nfs40_init_client+0x4a/0x90 [<00000000128486db>] nfs4_init_client+0xce/0x270 [<000000008d2cacad>] nfs4_set_client+0x1a2/0x2b0 [<000000000e593b52>] nfs4_create_server+0x300/0x5f0 [<00000000e4425dd2>] nfs4_try_get_tree+0x65/0x110 [<00000000d3a6176f>] vfs_get_tree+0x41/0xf0 [<0000000016b5ad4c>] path_mount+0x9b3/0xdd0 [<00000000494cae71>] __x64_sys_mount+0x190/0x1d0 [<000000005d56bdec>] do_syscall_64+0x35/0x80 [<00000000687c9ae4>] entry_SYSCALL_64_after_hwframe+0x46/0xb0 Fixes: abf79bb341bf ("NFS: Add a slot table to struct nfs_client for NFSv4.0 transport blocking") Signed-off-by: Zhang Xiaoxu Signed-off-by: Anna Schumaker Signed-off-by: Sasha Levin commit 21c81cb4188d0542e5ea4bde6e6314ccdbb8340d Author: Trond Myklebust Date: Sun Oct 16 14:44:33 2022 -0400 NFSv4.1: We must always send RECLAIM_COMPLETE after a reboot [ Upstream commit e59679f2b7e522ecad99974e5636291ffd47c184 ] Currently, we are only guaranteed to send RECLAIM_COMPLETE if we have open state to recover. Fix the client to always send RECLAIM_COMPLETE after setting up the lease. Fixes: fce5c838e133 ("nfs41: RECLAIM_COMPLETE functionality") Signed-off-by: Trond Myklebust Signed-off-by: Anna Schumaker Signed-off-by: Sasha Levin commit 2fa9061208d40477204ec4679331a3920548adb6 Author: Trond Myklebust Date: Sun Oct 16 14:44:32 2022 -0400 NFSv4.1: Handle RECLAIM_COMPLETE trunking errors [ Upstream commit 5d917cba3201e5c25059df96c29252fd99c4f6a7 ] If RECLAIM_COMPLETE sets the NFS4CLNT_BIND_CONN_TO_SESSION flag, then we need to loop back in order to handle it. Fixes: 0048fdd06614 ("NFSv4.1: RECLAIM_COMPLETE must handle NFS4ERR_CONN_NOT_BOUND_TO_SESSION") Signed-off-by: Trond Myklebust Signed-off-by: Anna Schumaker Signed-off-by: Sasha Levin