% BOOKFORM DOCUMENT STYLE -- for LaTeX version 2.08
\typeout{Document Style 'bookform'. Version EX 02 - revised 24 February 1986}
\typeout{}
\def\subsubparagraphmark#1{} % Default definitions for bookform style
\def\subsubsubparagraphmark#1{}
%
% Ignore boxes up to 10 point to wide
%
%\hfuzz=10pt
% The type size option is handled by reading a different file for each
% size, as follows:
% 10pt : BF10, 11pt : BF11, 12pt : BF12
% Implemented by \def'ing \@ptsize to last digit of file name.
%
\def\@ptsize{0} % Default is BF10.STY
\@namedef{ds@11pt}{\def\@ptsize{1}} % 11pt option reads in BF11.STY
\@namedef{ds@12pt}{\def\@ptsize{2}} % 12pt option reads in BF12.STY
%
% Define \documentnumber and \documentdate commands
\newcommand{\documentnumber}[1]{\def\docnumber{#1}}
\newcommand{\documentdate}[1]{\def\docdate{#1}}
% Two-side or one-side printing.
%
% \@twosidefalse % Default is one-sided printing.
\def\ds@twoside{\@twosidetrue % Defines twoside option.
\@mparswitchtrue} % Marginpars go on outside of page.
% draft option
%
% \overfullrule = 0pt % Default is don't mark overfull hboxes.
\def\ds@draft{\overfullrule 5pt} % Causes overfull hboxes to be marked.
%
% The \@options command causes the execution of every command \ds@FOO
% which is defined and for which the user typed the FOO option in his
% \documentstyle command. For every option BAR he typed for which
% \ds@BAR is not defined, the file BAR.sty will be read after the present
% (main) .STY file is executed.
\@options
\input bf1\@ptsize.sty\relax
\input extradefs
% ****************************************
% * LISTS *
% ****************************************
%
% ENUMERATE
% Enumeration is done with four counters: enumi, enumii, enumiii
% and enumiv, where enumN controls the numbering of the Nth level
% enumeration. The label is generated by the commands \labelenumi
% ... \labelenumiv. The expansion of \p@enumN\theenumN defines the
% output of a \ref command.
\def\labelenumi{\arabic{enumi}.}
\def\theenumi{\arabic{enumi}}
\def\labelenumii{(\alph{enumii})}
\def\theenumii{\alph{enumii}}
\def\p@enumii{\theenumi}
\def\labelenumiii{\roman{enumiii}.}
\def\theenumiii{\roman{enumiii}}
\def\p@enumiii{\theenumi(\theenumii)}
\def\labelenumiv{\Alph{enumiv}.}
\def\theenumiv{\Alph{enumiv}}
\def\p@enumiv{\p@enumiii\theenumiii}
% ITEMIZE
% Itemization is controlled by four commands: \labelitemi, \labelitemii,
% \labelitemiii, and \labelitemiv, which define the labels of the various
% itemization levels.
\def\labelitemi{$\bullet$}
\def\labelitemii{\bf --}
\def\labelitemiii{$\ast$}
\def\labelitemiv{$\cdot$}
% VERSE
% The verse environment is defined by making clever use of the
% list environment's parameters. The user types \\ to end a line.
% This is implemented by \let'in \\ equal \@centercr.
%
\def\verse{\let\\=\@centercr
\list{}{\itemsep\z@ \itemindent -1.5em\listparindent \itemindent
\rightmargin\leftmargin\advance\leftmargin 1.5em}\item[]}
\let\endverse\endlist
% QUOTATION
% Fills lines
% Indents paragraph
%
\def\quotation{\list{}{\listparindent 1.5em
\itemindent\listparindent
\rightmargin\leftmargin \parsep 0pt plus 1pt}\item[]}
\let\endquotation=\endlist
% QUOTE -- same as quotation except no paragraph indentation,
%
\def\quote{\list{}{\rightmargin\leftmargin}\item[]}
\let\endquote=\endlist
% DESCRIPTION
%
% To change the formatting of the label, you must redefine
% \descriptionlabel.
\def\descriptionlabel#1{\hspace\labelsep \bf #1}
\def\description{\list{}{\labelwidth\z@ \itemindent-\leftmargin
\let\makelabel\descriptionlabel}}
\let\enddescription\endlist
%\newdimen\descriptionmargin
%\descriptionmargin=3em
% ****************************************
% * OTHER ENVIRONMENTS *
% ****************************************
%
%
% THEOREM
% \@begintheorem ... \@endtheorem are the commands executed at the
% beginning and end of a (user-defined) theorem-like environment.
%
%
\def\@begintheorem#1#2{\it \trivlist \item[\hskip \labelsep{\bf #1\ #2}]}
\def\@endtheorem{\endtrivlist}
% EQUATION and EQNARRAY
%
% \newcounter{equation}
% Default is for left-hand side of equations to be flushleft.
% To make them flushright, do:
% \let\@eqnsel = \hfil
%
\def\theequation{\arabic{equation}}
% \jot = 3pt % Extra space added between lines of an eqnarray environment
% The macro \@eqnnum defines how equation numbers are to appear in equations.
%
% \def\@eqnnum{(\theequation)}
%
% TITLEPAGE
% In the normal environments, the titlepage environment does nothing but
% start and end a page, and inhibit page numbers. It also resets the
% page number to zero.
%
\def\titlepage{\@restonecolfalse\if@twocolumn\@restonecoltrue\onecolumn
\else \newpage \fi \thispagestyle{empty}\c@page\z@}
\def\endtitlepage{\if@restonecol\twocolumn \else \newpage \fi}
% ARRAY AND TABULAR
%
\arraycolsep 5pt % Half the space between columns in an array environment.
\tabcolsep 6pt % Half the space between columns in a tabular environment.
\arrayrulewidth .4pt % Width of rules in array and tabular environment.
\doublerulesep 2pt % Space between adjacent rules in array or tabular env.
% TABBING
%
\tabbingsep \labelsep % Space used by the \' command. (See LaTeX manual.)
% MINIPAGE
% \@minipagerestore is called upon entry to a minipage environment to
% set up things that are to be handled differently inside a minipage
% environment. In the current styles, it does nothing.
% \skip\@mpfootins : plays same role for footnotes in a minipage as
% \skip\footins does for ordinary footnotes
\skip\@mpfootins = \skip\footins
% FRAMEBOX
%
\fboxsep = 3pt % Space left between box and text by \fbox and \framebox.
\fboxrule = .4pt % Width of rules in box made by \fbox and \framebox.
% ****************************************
% * SECTIONS *
% ****************************************
%
% DEFINE COUNTERS:
%
% \newcounter{NEWCTR}[OLDCTR] : Defines NEWCTR to be a counter, which is
% reset to zero when counter OLDCTR is stepped.
% Counter OLDCTR must already be defined.
\newcounter{part}
\newcounter {section}
\newcounter {subsection}[section]
\newcounter {subsubsection}[subsection]
\newcounter {paragraph}[subsubsection]
\newcounter {subparagraph}[paragraph]
\newcounter {subsubparagraph}[subparagraph]
\newcounter {subsubsubparagraph}[subsubparagraph]
\newcounter {appnumber}
\newcounter {increment}
% For any counter CTR, \theCTR is a macro that defines the printed version
% of counter CTR. It is defined in terms of the following macros:
%
% \arabic{COUNTER} : The value of COUNTER printed as an arabic numeral.
% \roman{COUNTER} : Its value printed as a lower-case roman numberal.
% \Roman{COUNTER} : Its value printed as an upper-case roman numberal.
% \alph{COUNTER} : Value of COUNTER printed as a lower-case letter:
% 1 = a, 2 = b, etc.
% \Alph{COUNTER} : Value of COUNTER printed as an upper-case letter:
% 1 = A, 2 = B, etc.
%
\def\thepart{\Roman{part}} % Roman numeral part numbers.
\def\thesection {\arabic{section}.}
\def\thesubsection {\thesection\arabic{subsection}}
\def\thesubsubsection {\thesubsection .\arabic{subsubsection}}
\def\theparagraph {\thesubsubsection.\arabic{paragraph}}
\def\thesubparagraph {\theparagraph.\arabic{subparagraph}}
\def\thesubsubparagraph {\thesubparagraph.\arabic{subsubparagraph}}
\def\thesubsubsubparagraph {\thesubsubparagraph.\arabic{subsubsubparagraph}}
% ****************************************
% * TABLE OF CONTENTS, ETC. *
% ****************************************
%
% A \subsection command writes a
% \contentsline{subsection}{TITLE}{PAGE}
% command on the .toc file, where TITLE contains the contents of the
% entry and PAGE is the page number. If subsections are being numbered,
% then TITLE will be of the form
% \numberline{NUM}{HEADING}
% where NUM is the number produced by \thesubsection. Other sectioning
% commands work similarly.
%
% A \caption command in a 'figure' environment writes
% \contentsline{figure}{\numberline{NUM}{CAPTION}}{PAGE}
% on the .lof file, where NUM is the number produced by \thefigure and
% CAPTION is the figure caption. It works similarly for a 'table' environment.
%
% The command \contentsline{NAME} expands to \l@NAME. So, to specify
% the table of contents, we must define \l@section,
% \l@subsection, ... ; to specify the list of figures, we must define
% \l@figure; and so on. Most of these can be defined with the
% \@dottedtocline command, which works as follows.
%
% \@dottedtocline{LEVEL}{INDENT}{NUMWIDTH}{TITLE}{PAGE}
% LEVEL : An entry is produced only if LEVEL < or = value of
% 'tocdepth' counter. Note that \section is level 1,
% \subsection is level 2, etc.
% INDENT : The indentation from the outer left margin of the start of
% the contents line.
% NUMWIDTH : The width of a box in which the section number is to go,
% if TITLE includes a \numberline command.
%
% This command uses the following three parameters, which are set
% with a \def (so em's can be used to make them depend upon the font).
% \@pnumwidth : The width of a box in which the page number is put.
% \@tocrmarg : The right margin for multiple line entries. One
% wants \@tocrmarg > or = \@pnumwidth
% \@dotsep : Separation between dots, in mu units. Should be \def'd to
% a number like 2 or 1.7
\def\@pnumwidth{3em}
\def\@tocrmarg {2.55em}
\def\@dotsep{4.5}
\setcounter{tocdepth}{7}
% TABLEOFCONTENTS
%
\def\tableofcontents{\section*{\protect\centering{TABLE OF CONTENTS}
\markboth{TABLE OF CONTENTS}{TABLE OF CONTENTS}}
\addvspace{1.0em plus 1pt} % space above toc entry
\begingroup
\parindent \z@ \rightskip \@pnumwidth
\parfillskip -\@pnumwidth
\bf % Boldface.
\leavevmode % TeX command to enter horizontal mode.
\hbox to\textwidth{Paragraph \hfill Page}\par
\addvspace{1.0em plus 1pt} % space below Parag... entry
\endgroup
{\parskip 0pt plus 1pt
\@starttoc{toc}}}
\def\l@part#1#2{\addpenalty{-\@highpenalty}
\addvspace{2.25em plus 1pt} % space above part line
\begingroup
\@tempdima 3em % width of box holding part number, used by
\parindent \z@ \rightskip \@pnumwidth %% \numberline
\parfillskip -\@pnumwidth
{\large \bf % set line in \large boldface
\leavevmode % TeX command to enter horizontal mode.
#1\hfil \hbox to\@pnumwidth{\hss #2}}\par
\nobreak % Never break after part entry
\endgroup}
\def\l@section{\@dottedtocline{1}{0em}{7em}}
\def\l@subsection{\@dottedtocline{2}{0em}{7em}}
\def\l@subsubsection{\@dottedtocline{3}{0em}{7em}}
\def\l@paragraph{\@dottedtocline{4}{0em}{7em}}
\def\l@subparagraph{\@dottedtocline{5}{0em}{7em}}
\def\l@subsubparagraph{\@dottedtocline{6}{0em}{7em}}
\def\l@subsubsubparagraph{\@dottedtocline{7}{0em}{7em}}
% LIST OF FIGURES
%
\def\listoffigures{\section*{\protect\centering{LIST OF FIGURES}
\markboth{LIST OF FIGURES}{LIST OF FIGURES}}
\addvspace{1.0em plus 1pt} % space above lof entry
\begingroup
\parindent \z@ \rightskip \@pnumwidth
\parfillskip -\@pnumwidth
\bf % Boldface.
\leavevmode % TeX command to enter horizontal mode.
\hbox to\textwidth{Figure \hfill Page}\par
\addvspace{1.0em plus 1pt} % space below Figure... entry
\endgroup
{\parskip 0pt plus 1pt
\@starttoc{lof}}}
\def\l@figure{\@dottedtocline{1}{0em}{3.5em}}
% LIST OF TABLES
%
\def\listoftables{\section*{\protect\centering{LIST OF TABLES}
\markboth{LIST OF TABLES}{LIST OF TABLES}}
\addvspace{1.0em plus 1pt} % space above lot entry
\begingroup
\parindent \z@ \rightskip \@pnumwidth
\parfillskip -\@pnumwidth
\bf % Boldface.
\leavevmode % TeX command to enter horizontal mode.
\hbox to\textwidth{Table \hfill Page}\par
\addvspace{1.0em plus 1pt} % space below Table... entry
\endgroup
{\parskip 0pt plus 1pt
\@starttoc{lot}}}
\let\l@table\l@figure
% ****************************************
% * BIBLIOGRAPHY *
% ****************************************
%
% TEMPORARY DEFINITIONS:
\def\thebibliography#1{\section*{References\markboth
{REFERENCES}{REFERENCES}}\list
{[\arabic{enumi}]}{\settowidth\labelwidth{[#1]}\leftmargin\labelwidth
\advance\leftmargin\labelsep\usecounter{enumi}}}
\let\endthebibliography=\endlist
% \def\@biblabel#1{[#1]\hfill} % Produces the label for a \bibitem[...]
% command.
% \def\@cite#1{[#1]} % Produces the output of the \cite command.
% ****************************************
% * THE INDEX *
% ****************************************
%
% THE THEINDEX ENVIRONMENT
% Produces double column format, with each paragraph a separate entry.
% The user commands \item, \subitem and \subsubitem are used to
% produce the entries, and \indexspace adds an extra vertical space
% that's the right size to put above the first entry with a new letter
% of the alphabet.
\newif\if@restonecol
\def\theindex{\@restonecoltrue\if@twocolumn\@restonecolfalse\fi
\columnseprule \z@
\columnsep 35pt\twocolumn[\section*{Index}]
\markboth{INDEX}{INDEX}\thispagestyle{plain}\parindent\z@
\parskip\z@ plus .3pt\relax\let\item\@idxitem}
\def\@idxitem{\par\hangindent 40pt}
\def\subitem{\par\hangindent 40pt \hspace*{20pt}}
\def\subsubitem{\par\hangindent 40pt \hspace*{30pt}}
\def\endtheindex{\if@restonecol\onecolumn\else\clearpage\fi}
\def\indexspace{\par \vskip 10pt plus 5pt minus 3pt\relax}
% ****************************************
% * FOOTNOTES *
% ****************************************
%
% \footnoterule is a macro to draw the rule separating the footnotes from
% the text. It should take zero vertical space, so it needs a negative
% skip to compensate for any positive space taken by the rule. (See
% PLAIN.TEX.)
\def\footnoterule{\kern-1\p@
\hrule width .4\columnwidth
\kern .6\p@} % The \hrule has default height of .4pt .
% \newcounter{footnote}
% The numbering style (arabic, alph, etc.) for ordinary footnotes
% is defined by the macro \thefootnote.
%
% \@makefntext{NOTE} :
% Must produce the actual footnote, using \@thefnmark as the mark
% of the footnote and NOTE as the text. It is called when effectively
% inside a \parbox of width \columnwidth (i.e., with \hsize =
% \columnwidth). The following macro indents
% all lines of the footnote by 10pt, and indents the first line of
% a new paragraph by 1em. To change these dimensions, just substitute
% the desired value for '10pt' [in both places] or '1em'.
% The mark is flushright against the footnote.
%
% It is much easier to write a macro in which the footnote text is
% set like an ordinary text paragraph, with no indentation except
% on the first line of a paragraph, and the first line of the
% footnote. In that case, all the macro must do is set \parindent
% to the appropriate value for succeeding paragraphs and put the
% proper indentation before mark.
\long\def\@makefntext#1{\@setpar{\@@par\@tempdima \hsize
\advance\@tempdima-10pt\parshape \@ne 10pt \@tempdima}\par
\parindent 1em\noindent \hbox to \z@{\hss$^{\@thefnmark}$}#1}
% \@makefnmark : A macro to generate the footnote marker that goes
% in the text. Default definition used.
% ****************************************
% * FIGURES AND TABLES *
% ****************************************
%
% Float placement parameters. See LaTeX manual for their definition.
%
\setcounter{topnumber}{2}
\def\topfraction{.7}
\setcounter{bottomnumber}{1}
\def\bottomfraction{.3}
\setcounter{totalnumber}{3}
\def\textfraction{.2}
\def\floatpagefraction{.5}
\setcounter{dbltopnumber}{2}
\def\dbltopfraction{.7}
\def\dblfloatpagefraction{.5}
% \@makecaption{NUMBER}{TEXT} : Macro to make a figure or table caption.
% NUMBER : Figure or table number--e.g., 'Figure 3.2'
% TEXT : The caption text.
% Macro should be called inside a \parbox of right width, with \normalsize.
\long\def\@makecaption#1#2{
\vskip 10pt
\setbox\@tempboxa\hbox{#1. #2}
\ifdim \wd\@tempboxa >\hsize % IF longer than one line:
\unhbox\@tempboxa\par % THEN set as ordinary paragraph.
\else % ELSE center.
\hbox to\hsize{\hfil\box\@tempboxa\hfil}
\fi}
% To define a float of type TYPE (e.g., TYPE = figure), the document style
% must define the following.
%
% \fps@TYPE : The default placement specifier for floats of type TYPE.
%
% \ftype@TYPE : The type number for floats of type TYPE. Each TYPE has
% associated a unique positive TYPE NUMBER, which is a power
% of two. E.g., figures might have type number 1, tables type
% number 2, programs type number 4, etc.
%
% \ext@TYPE : The file extension indicating the file on which the
% contents list for float type TYPE is stored. For example,
% \ext@figure = 'lof'.
%
% \fnum@TYPE : A macro to generate the figure number for a caption.
% For example, \fnum@TYPE == Figure \thefigure.
%
% The actual float-making environment commands--e.g., the commands
% \figure and \endfigure--are defined in terms of the macros \@float
% and \end@float, which are described below.
%
% \@float{TYPE}[PLACEMENT] : Macro to begin a float environment for a
% single-column float of type TYPE with PLACEMENT as the placement
% specifier. The default value of PLACEMENT is defined by \fps@TYPE.
% The environment is ended by \end@float.
% E.g., \figure == \@float{figure}, \endfigure == \end@float.
% FIGURE
\newcounter{figure}
\def\thefigure{\@arabic\c@figure}
\def\fps@figure{hbp}
\def\ftype@figure{1}
\def\ext@figure{lof}
\def\fnum@figure{Figure \thefigure}
\def\figure{\@float{figure}}
\let\endfigure\end@float
\@namedef{figure*}{\@dblfloat{figure}}
\@namedef{endfigure*}{\end@dblfloat}
% TABLE
%
\newcounter{table}
\def\thetable{\@Roman\c@table}
\def\fps@table{hbp}
\def\ftype@table{2}
\def\ext@table{lot}
\def\fnum@table{Table \thetable}
\def\table{\@float{table}}
\let\endtable\end@float
\@namedef{table*}{\@dblfloat{table}}
\@namedef{endtable*}{\end@dblfloat}
% ****************************************
% * TITLE AND ABSTRACT *
% ****************************************
%
% \maketitle ==
% BEGIN
% \par
% \begingroup
% redefine \@makefnmark so footnote marks take zero space (this make
% centering look better)
% \thefootnote == \fnsymbol{footnote} % to number by *, dagger, etc.
% if @twocolumn = true
% then \twocolumn[\@maketitle]
% else \@maketitle
% fi
% \thispagestyle{plain}
% \@thanks % \thanks defines \@thanks to have \footnotetext commands for
% % producing footnotes.
% \endgroup
% END
\def\maketitle{\par
\begingroup
\if@twocolumn
\twocolumn[\@maketitle]
\else \newpage
\global\@topnum\z@ % Prevents figures from going at top of page.
\@maketitle \fi
\endgroup
\let\maketitle\relax
\let\@maketitle\relax
\gdef\@thanks{}\gdef\@author{}\gdef\@title{}\let\thanks\relax}
\def\@maketitle{\newpage \thispagestyle{empty}
\parskip 0pt plus 1pt
\null
\vspace{.4in}
\begin{center}
{\large \bf \@title \par} % Title set in \large size.
\end{center}
}
\def\abstract{\if@twocolumn
\section*{Abstract}
\else \small
\begin{center}
{\bf Abstract\vspace{-.5em}\vspace{0pt}}
\end{center}
\quotation
\fi}
\def\endabstract{\if@twocolumn\else\endquotation\fi}
% ****************************************
% * PAGE STYLES *
% ****************************************
%
% The page style 'foo' is defined by defining the command \ps@foo. This
% command should make only local definitions. There should be no stray
% spaces in the definition, since they could lead to mysterious extra
% spaces in the output.
%
% The \ps@... command defines the macros \@oddhead, \@oddfoot,
% \@evenhead, and \@evenfoot to define the running heads and
% feet---e.g., \@oddhead is the macro to produce the contents of the
% heading box for odd-numbered pages. It is called inside an \hbox of
% width \textwidth.
%
% To make headings determined by the sectioning commands, the page style
% defines the commands \sectionmark, ... , where
% \sectionmark{TEXT} is called by \section to set a mark, and so on.
% The \...mark commands and the \...head macros are defined with the
% help of the following macros. (All the \...mark commands should be
% initialized to no-ops.)
%
% MARKING CONVENTIONS:
% LaTeX extends TeX's \mark facility by producing two kinds of marks
% a 'left' and a 'right' mark, using the following commands:
% \markboth{LEFT}{RIGHT} : Adds both marks.
% \markright{RIGHT} : Adds a 'right' mark.
% \leftmark : Used in the \@oddhead, \@oddfoot, \@evenhead or \@evenfoot
% macro, gets the current 'left' mark. Works like TeX's
% \botmark command.
% \rightmark : Used in the \@oddhead, \@oddfoot, \@evenhead or \@evenfoot
% macro, gets the current 'right' mark. Works like TeX's
% \firstmark command.
% The marking commands work reasonably well for right marks 'numbered
% within' left marks--e.g., the left mark is changed by a \section command and
% the right mark is changed by a \subsection command. However, it does
% produce somewhat anomalous results if two \bothmark's occur on the same page.
%
\mark{{}{}} % Initializes TeX's marks
% \def\ps@empty{\def\@oddhead{}
% \def\@oddfoot{}
% \def\@evenhead{}\def\@evenfoot{}}
%
% \def\ps@plain{\def\@oddhead{}
% \def\@oddfoot{\rm\hfil\thepage\hfil}
% \def\@evenhead{}
% \let\@evenfoot\@oddfoot}
% Definition of 'headings' page style
% Note the use of ##1 for parameter of \def\sectionmark inside the
% \def\ps@headings.
%
\if@twoside % If two-sided printing.
\def\ps@headings{\def\@oddfoot{}\def\@evenfoot{}% No feet.
\def\@evenhead{\rm \thepage\hfil \sl \leftmark}% Left heading.
\def\@oddhead{\hbox{}\sl \rightmark \hfil \rm\thepage}% Right heading.
\def\sectionmark##1{\markboth {\uppercase{\ifnum \c@secnumdepth >\z@
\thesection\hskip 1em\relax \fi ##1}}{}}%
\def\subsectionmark##1{\markright {\ifnum \c@secnumdepth >\@ne
\thesubsection\hskip 1em\relax \fi ##1}}}
\else % If one-sided printing.
\def\ps@headings{\def\@oddfoot{}\def\@evenfoot{}% No feet.
\def\@oddhead{\hbox {}\sl \rightmark \hfil \rm\thepage}% Heading.
\def\sectionmark##1{\markright {\uppercase{\ifnum \c@secnumdepth >\z@
\thesection\hskip 1em\relax \fi ##1}}}}
\fi
% Definition of 'myheadings' page style. The user's \head command
% changes the definition of \@lhead and/or \@rhead.
%
\def\ps@myheadings{\def\@oddhead{\hbox{}\sl\@rhead \hfil \rm\thepage}%
\def\@oddfoot{}\def\@evenhead{\rm \thepage\hfil\sl\@lhead\hbox {}}%
\def\@evenfoot{}\def\sectionmark##1{}\def\subsectionmark##1{}}
% Definition of 'bookform' page style for LSI bookform documents.
% Note the use of ##1 for parameter of \def\sectionmark inside the
% \def\ps@bookform.
%
\if@twoside % If two-sided printing.
\def\ps@bookform{%
\def\@oddfoot{\makebox[\textwidth][l]{
\makebox[1.1\textwidth][r]{
\rm \hbox{}\hfil \docnumber \hspace{1.5in} \thepage}}}
\def\@evenfoot{\makebox[\textwidth][r]{
\makebox[1.1\textwidth][l]{
\rm \thepage \hspace{1.5in} \docnumber \hfil}}}%
\def\@evenhead{}
\def\@oddhead{}
\def\sectionmark##1{}\def\subsectionmark##1{}}
\else % If one-sided printing.
\def\ps@bookform{%
\def\@oddfoot{\makebox[\textwidth][l]{% First box is \textwidth wide
\makebox[1.1\textwidth][r]{% Inner box is slightly bigger
\rm\hbox{}\hfil \docnumber \hspace{1.5in} \thepage}}}%
\def\@evenfoot{}%
\def\@oddhead{} \def\@evenhead{}
\def\sectionmark##1{}\def\subsectionmark##1{}}
\fi
% ****************************************
% * MISCELLANEOUS *
% ****************************************
%
% DATE
%
\def\today{\number\day\space \ifcase\month\or
January\or February\or March\or April\or May\or June\or
July\or August\or September\or October\or November\or December\fi
\space\number\year}
% ****************************************
% * INITIALIZATION *
% ****************************************
%
% Default initializations
\ps@bookform
\pagenumbering{arabic} % Arabic page numbers
\onecolumn % Single-column.
\def\docdate{}
\def\docnumber{}
\if@twoside\else\raggedbottom\fi % Ragged bottom unless twoside option.
%
% Define the section style commands
%
\def\sectionstyle{\large\bf}
\def\subsectionstyle{\large\bf}
\def\subsubsectionstyle{\normalsize\bf}
\def\paragraphstyle{\normalsize\bf}
\def\subparagraphstyle{\normalsize\bf}
\def\subsubparagraphstyle{\normalsize\bf}
\def\subsubsubparagraphstyle{\normalsize\bf}
% DEC/CMS REPLACEMENT HISTORY, Element BOOKFORM.STY
% *7 27-FEB-1986 10:29:38 MCPHERSON "Remove commented \l@section definition"
% *6 24-FEB-1986 14:48:13 MCPHERSON "set \parskip to 0pt inside list of tables and figures"
% *5 24-FEB-1986 13:23:45 MCPHERSON "Set \parskip to 0pt only for table of contents"
% *4 21-FEB-1986 18:13:10 MCPHERSON "Corrected the increment counter definition"
% *3 21-FEB-1986 18:10:07 MCPHERSON "Correct appnumber counter definition"
% *2 21-FEB-1986 17:38:46 MCPHERSON "Changed enumeration labels, restored headings page style, defined appendix page style"
% *1 7-FEB-1986 10:12:27 MCPHERSON "Initial bookform style"
% DEC/CMS REPLACEMENT HISTORY, Element BOOKFORM.STY