% \iffalse meta-comment
%
% Copyright (C) 2010 by Dag Langmyhr
%
% This file may be distributed and/or modified under the
% conditions of the LaTeX Project Public License, see
% http://www.latex-project.org/lppl.txt
%
% \fi
%
% \iffalse
%<*driver>
\ProvidesFile{elbioimp.dtx}
%</driver>
%<class>\NeedsTeXFormat{LaTeX2e}[1999/12/01]
%<class>\ProvidesClass{elbioimp}
%<*class>
[2010/02/08 v1.0 Document class for Journal of Electrical Bioimpedance]
%</class>
%
%<*driver>
\documentclass{elbioimp}
\usepackage[T1]{fontenc}
\usepackage{doc,textcomp,varioref}
\EnableCrossrefs
\CodelineIndex
\RecordChanges
\keywords{\LaTeX{} document class, journal document style}
\begin{document}
\DocInput{elbioimp.dtx}
\end{document}
%</driver>
% \fi
%
% \CheckSum{0}
%
% \CharacterTable
% {Upper-case \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z
% Lower-case \a\b\c\d\e\f\g\h\i\j\k\l\m\n\o\p\q\r\s\t\u\v\w\x\y\z
% Digits \0\1\2\3\4\5\6\7\8\9
% Exclamation \! Double quote \" Hash (number) \#
% Dollar \$ Percent \% Ampersand \&
% Acute accent \' Left paren \( Right paren \)
% Asterisk \* Plus \+ Comma \,
% Minus \- Point \. Solidus \/
% Colon \: Semicolon \; Less than \<
% Equals \= Greater than \> Question mark \?
% Commercial at \@ Left bracket \[ Backslash \\
% Right bracket \] Circumflex \^ Underscore \_
% Grave accent \` Left brace \{ Vertical bar \|
% Right brace \} Tilde \~}
%
% % \CheckSum{222}
%
% \changes{v1.0}{2010/01/20}{Initial version}
%
% \GetFileInfo{elbioimp.dtx}
%
% \DoNotIndex{\,}
% \DoNotIndex{\abstractname,\arabic,\AtBeginDocument,\@author}
% \DoNotIndex{\baselineskip,\begin,\bf}
% \DoNotIndex{\captionsetup,\ClassWarningNoLine,\CurrentOption}
% \DoNotIndex{\DeclareCaptionLabelFormat,\DeclareMathSizes,\DeclareOption,\def}
% \DoNotIndex{\end,\equal}
% \DoNotIndex{\footnote,\footnoterule}
% \DoNotIndex{\ifthenelse,\@ifundefined,\ignorespaces,\it,\itemsep}
% \DoNotIndex{\leftmargin,\leftmargini,\let,\@listi,\@listI,\LoadClass}
% \DoNotIndex{\@makefntext}
% \DoNotIndex{\newcommand,\newenvironment,\noindent,\normalfont}
% \DoNotIndex{\par,\parindent,\parsep,\ProcessOptions}
% \DoNotIndex{\relax,\renewcommand,\renewenvironment,\RequirePackage,\rule}
% \DoNotIndex{\setcounter,\@setfontsize,\setlength,\space,\@startsection}
% \DoNotIndex{\textbf,\textwidth,\@thefnmark,%
% \thempfootnote,\@title,\topsep,\twocolumn}
% \DoNotIndex{\vspace}
%
% \newcommand{\Cname}{\textsf{elbioimp}}
% \newcommand{\Jname}{\emph{Journal of Electrical Bioimpedance}}
%
% \title{The \Cname{} class\thanks{This document
% corresponds to \Cname{}~\fileversion,
% dated \filedate.}}
% \author{Dag Langmyhr\thanks{Department of Informatics,
% University of Oslo, \textsf{dag@ifi.uio.no}}}
%
% \maketitle
%
% \begin{abstract}
% \noindent
% This paper describes the implementation of the document class
% \Cname{} which is intended for writing articles in the \Jname.
% \end{abstract}
%
%
% \section{Introduction}
% The \Jname{} (see its web page at
% \url{https://www.journals.uio.no/index.php/bioimpedance}) has
% defined a typographic style for its publication, to some extent
% based on recommendations from the \emph{US National institute of
% health}\cite{NIH}. The \LaTeX{} document class \Cname{} implements
% this style.
%
% This \LaTeX{} code is published with a \textbf{\LaTeX{} project
% public license} as described in
% \url{http://www.latex-project.org/lppl/}.
%
% As an example, this documentation uses the \Cname{} class.
%
%
% \section{Usage}
% To use this document class, you must first put the
% \url{elbioimp.cls} file somewhere that \LaTeX{} can find
% it.\footnote{If you are not very familiar with your \LaTeX{}
% installation or your system administrator, you can put the
% \url{elbioimp.cls} file in the same folder as your \LaTeX{} source
% files.}
% Then you can write your \LaTeX{} document starting with
% \begin{verbatim}
%\documentclass{elbioimp}
% \end{verbatim}
% The document class is based on the standard \emph{article} class and
% is used just like that class, with three exceptions:
% \begin{enumerate}
% \item The authors' affiliations are given with the \verb:\thanks:
% command, as in
% \begin{verbatim}
%\author{My name\thanks{My univerisity,
% My country}}
% \end{verbatim}
%
% \item The author may indicate any keywords by empoying the
% \verb:\keyword: command.
%
% \item The document class will function poorly unless there is an
% \verb:abstract: environment.
% \end{enumerate}
%
% \StopEventually{\newpage\bibliography{elbioimp}\onecolumn\PrintIndex}
%
%
% \section{Class headers}
% All \LaTeXe{} class files contain a header with a set of standard
% specifications.
%
% \subsection{Class options}
% The document class has no options.
% \begin{macrocode}
\DeclareOption*{\ClassWarningNoLine
{elbioimp}{Class option \CurrentOption
\space is illegal in this document class}}
\ProcessOptions \relax
% \end{macrocode}
%
% \subsection{Base class}
% This document class is based on the standard \emph{article} class.
%
% \begin{macrocode}
\LoadClass[twocolumn]{article}
% \end{macrocode}
%
% \section{Required packages}
% A couple of standard packages are necessary to implement this class.
%
% \subsection{The \textsf{ifthen} package}
% The \textsf{ifthen} package makes testing easier.
% \begin{macrocode}
\RequirePackage{ifthen}
% \end{macrocode}
%
% \subsection{The \textsf{url} package}
% URLs should be typeset in a \textsf{Sans serif font} rather than a
% \texttt{Teletype font}.
% \begin{macrocode}
\RequirePackage[T1]{url}
\urlstyle{sf}
% \end{macrocode}
%
%
% \section{Document title area}
% The title area has its own particular design.
% \begin{macrocode}
\AtBeginDocument{\renewcommand{\maketitle}{%
\twocolumn[\begin{minipage}{\textwidth}
\renewcommand{\and}{, }
\let \thanks = \footnote
\renewcommand{\footnoterule}{}
\def \@makefntext ##1{\noindent
\small \@thefnmark. \it ##1}
\renewcommand{\thempfootnote}%
{\arabic{mpfootnote}}
\parindent = 0pt
{\huge \@title}\par\vspace{16pt}
{\large \@author}
\end{minipage}\par\vspace{14pt}\noindent
\elb@rule{\textwidth}\vspace{11pt}]}}
\newcommand{\elb@rule}[1]{\rule{#1}{0.6pt}}
% \end{macrocode}
%
% \subsection{Keywords}
% An additional command \verb:\keywords: makes it possible to specify
% keywords that apply to the document.
% \begin{macrocode}
\newcommand{\keywords}[1]{\def\elb@keywords{#1}}
% \end{macrocode}
%
% \subsection{Abstract}
% The abstract is typeset in \verb:\small:, and includes the keywords (if
% any).
% \begin{macrocode}
\renewenvironment{abstract}
{\small\noindent
\textbf{\abstractname}\par\vspace{1pt}
\noindent\ignorespaces}
{\par
\@ifundefined{elb@keywords}{}{%
\vspace{\baselineskip}\noindent
\textbf{Keywords:} \elb@keywords\par}
\vspace{\baselineskip}\noindent
\elb@rule{\columnwidth}}
% \end{macrocode}
%
%
% \section{Body text}
%
% \subsection{Text area}
% The text area should be in two columns and fill an A4 paper with
% margins 1.5\,cm (except the top margin, which should be 2.5\,cm).
% The gutter space should be 1\,cm.
% \begin{macrocode}
\RequirePackage[a4paper,
margin=1.5cm,top=2.5cm]{geometry}
\setlength{\columnsep}{1cm}
% \end{macrocode}
% Since the layout uses double columns, I will increase the tolerance
% for line-breaking.
% \begin{macrocode}
\pretolerance = 1000
\tolerance = 2000 \hbadness = \tolerance
% \end{macrocode}
%
%
% \subsection{Headers and footers}
% This document class has neither headers nor footers, presumably
% because the publisher will add them later.
% \begin{macrocode}
\AtBeginDocument{\pagestyle{empty}}
% \end{macrocode}
%
%
% \subsection{Text font}
% The specified journal font is \emph{Times Roman}. The
% \emph{mathptmx} packages is one of several packages that can handle this,
% but this particular package has the advantage that it also uses
% \emph{Times Roman} for the math fonts (as much as possible).
% \begin{macrocode}
\RequirePackage{mathptmx}
% \end{macrocode}
% The \emph{mathptmx} package retains the \textsf{Computer Modern Sans
% Serif} and \texttt{Computer Modern Teletype} fonts, but they blend reasonably
% well with \emph{Times Roman} (at least in my opinion) so I will keep
% them.
%
% \subsection{Text sizes}
% The specified text sizes are shown in Table\vref{tab:sizes}.
% The leading should be 10\%.
% \begin{table}
% \centering
% \begin{tabular}{cr}
% \Huge \strut\verb:\Huge:& 20\,pt\\
% \huge \strut\verb:\huge:& 16\,pt\\
% \LARGE \strut\verb:\LARGE:& 14\,pt\\
% \Large \strut\verb:\Large:& 12\,pt\\
% \large \strut\verb:\large:& 11\,pt\\
% \normalsize \strut\verb:\normalsize:& 10\,pt\\
% \small \strut\verb:\small:& 9\,pt\\
% \footnotesize \strut\verb:\footnotesize:& 8\,pt\\
% \scriptsize \strut\verb:\scriptsize:& 7\,pt\\
% \tiny \strut\verb:\tiny:& 5\,pt\\
% \end{tabular}
% \caption{Text sizes in \Cname\label{tab:sizes}}
% \end{table}
% \begin{macrocode}
\renewcommand{\Huge}{\@setfontsize%
\Huge {20}{22}}
\renewcommand{\huge}{\@setfontsize
\huge {16}{17.6}}
\renewcommand{\LARGE}{\@setfontsize
\LARGE {14}{15.4}}
\renewcommand{\Large}{\@setfontsize
\Large {12}{13.2}}
\renewcommand{\large}{\@setfontsize
\large {11}{12.1}}
\renewcommand{\normalsize}{%
\@setfontsize \normalsize {10}{11}
\abovedisplayskip =
10pt plus 2pt minus 5pt
\abovedisplayshortskip =
0pt plus 3pt
\belowdisplayshortskip =
6pt plus 3pt minus 3pt
\belowdisplayskip = \abovedisplayskip
\def\@listi{\leftmargin = \leftmargini
\topsep = 5pt plus 2pt minus 2pt
\parsep = 3pt plus 1pt minus 1pt
\itemsep = \topsep}}
\renewcommand{\small}{%
\@setfontsize \small {9}{9.9}%
\abovedisplayskip =
8.5pt plus 3pt minus 4pt
\abovedisplayshortskip =
0pt plus 2pt
\belowdisplayshortskip =
4pt plus 2pt minus 2pt
\def\@listi{\leftmargin = \leftmargini
\topsep = 4pt plus 2pt minus 2pt
\parsep = 2pt plus 1pt minus 1pt
\itemsep = \topsep}%
\belowdisplayskip = \abovedisplayskip}
\renewcommand{\footnotesize}{%
\@setfontsize \footnotesize {8}{8.8}%
\abovedisplayskip =
6pt plus 2pt minus 4pt
\abovedisplayshortskip =
0pt plus 1pt
\belowdisplayshortskip =
3pt plus 1pt minus 2pt
\def\@listi{\leftmargin = \leftmargini
\topsep = 3pt plus 1pt minus 1pt
\parsep = 1.5pt plus 1pt minus 1pt
\itemsep = \topsep}%
\belowdisplayskip = \abovedisplayskip}
\renewcommand{\scriptsize}{\@setfontsize
\scriptsize {7}{7.7}}
\renewcommand{\tiny}{\@setfontsize
\tiny {5}{5.5}}
% \end{macrocode}
% As expected, \verb:\normalsize: is the default.
% \begin{macrocode}
\normalsize
% \end{macrocode}
% Since the class uses some non-standard sizes (i.e., not in the
% $1{.}2^n$-series) it must signal \LaTeX{} that font
% scaling may be used.\footnote{These days, all decent \LaTeX{} installations
% should provide scalable fonts.}
% \begin{macrocode}
\RequirePackage{type1cm,type1ec}
% \end{macrocode}
% The class must also define some math sizes.
% \begin{macrocode}
\DeclareMathSizes{11}{11}{8}{6}
\DeclareMathSizes{14}{14}{11}{8}
\DeclareMathSizes{16}{16}{12}{10}
\DeclareMathSizes{20}{20}{14}{12}
% \end{macrocode}
%
%
% \section{Sectioning}
% The section headers in this class have a different look from the
% standard \LaTeX{} classes.
% \begin{macrocode}
\renewcommand{\section}{\@startsection
{section}{1}{0pt}%
{-11pt plus -6pt minus -2pt}%
{11pt plus 6pt minus 2pt}%
{\normalfont\normalsize\bf}}
\renewcommand{\subsection}{\@startsection
{subsection}{2}{0pt}%
{-11pt plus -6pt minus -2pt}%
{11pt plus 6pt minus 2pt}%
{\normalfont\normalsize\it}}
% \end{macrocode}
% More detailed levels than \verb:\subsection: are not defined for
% this style, so I define them to have the same appearance as
% \verb:\subsection:.
% \begin{macrocode}
\renewcommand{\subsubsection}{\@startsection
{subsubsection}{3}{0pt}%
{-11pt plus -6pt minus -2pt}%
{11pt plus 6pt minus 2pt}%
{\normalfont\normalsize\it}}
\renewcommand{\paragraph}{\@startsection
{paragraph}{4}{0pt}%
{-11pt plus -6pt minus -2pt}%
{11pt plus 6pt minus 2pt}%
{\normalfont\normalsize\it}}
\renewcommand{\subparagraph}{\@startsection
{subparagraph}{5}{0pt}%
{-11pt plus -6pt minus -2pt}%
{11pt plus 6pt minus 2pt}%
{\normalfont\normalsize\it}}
% \end{macrocode}
%
% \subsection{Section numbering}
% No sections should be numbered.
% \begin{macrocode}
\setcounter{secnumdepth}{-2}
% \end{macrocode}
%
%
% \section{Floats}
% Formating of float captions is best handled using the
% \textsf{caption} package. This style wants them
% \begin{itemize}
% \item indentend 0.5\,cm on each side
% \item 8\,pt type size
% \item numbering should use ``Fig.~1'' or ``Tab.~1''.
% \end{itemize}
% \begin{macrocode}
\RequirePackage[margin=0.5cm,font=footnotesize,
aboveskip=5pt]{caption}
\DeclareCaptionLabelFormat{fig}
{\ifthenelse{\equal{#1}%
{Figure}}{Fig}{Tab}.\,#2}
\captionsetup{labelformat=fig}
\setlength{\floatsep}{6pt plus 3pt}
\setlength{\textfloatsep}{\floatsep}
% \end{macrocode}
%
%
% \section{Document reference list}
% The reference list should be according to the Vancouver style:
% \begin{macrocode}
\bibliographystyle{vancouver}
% \end{macrocode}
% but the bibliography should be set in 9\,pt type size with 3\,pt vertical
% space.
% \begin{macrocode}
\renewcommand{\@openbib@code}{\small
\setlength{\itemsep}{3pt}%
\setlength{\parsep}{1pt plus 1pt}}
% \end{macrocode}
% In the bibliography, citations will be indicated as ``1.''
% rather than as ``[1]''.
% \begin{macrocode}
\renewcommand\@biblabel[1]{#1.}
% \end{macrocode}
%
% \Finale
\endinput